We will reply to your message within an hour.
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits.
Produce a smooth surface on precise, intricate grinding jobs.
Each set contains a selection of our most popular grinding bits.
Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.
Use bits in any drill chuck that accepts a 1/4" hex shank.
Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas.
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits.
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs.
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic.
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs.
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes.
Polish, deburr, and remove rust from metal surfaces such as tools, machine parts, and electrical contacts.
Grind, sand, finish, and polish workpieces.
Sharpen, deburr, and grind metal surfaces.
Swap out accessories on your Dremel without tools.
Convert your straight grinder into an angle grinder.
Attach these guides to your Dremel to cut circular holes in a variety of materials.
Mount these attachments to the nose of your Dremel to blow away dust and fine debris for better visibility when sanding, engraving, and carving.
Sharpen, grind, and sand at accurate 45° and 90° angles with these rests.
Buff, polish, and clean with in these kits.
Convert your rotary tool into a plunge router to route circles, route freehand, and cut decorative edges, straight slots, and inlay work.
Swap accessories quickly and safely without tools.
Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your rotary tool.
Replace the brush and spring on your rotary tool.
For fast accessory changes without any other tools, twist these wrenches to loosen and tighten the collet on your Dremel grinder.
The quick-change arbors in these kits allow you to easily swap accessories.
Turn Dremel rotary tools into miniature drill presses.
Shape and smooth wood, fiberglass, and rubber surfaces or remove rust from metal.
Protect yourself from sparks or flying debris when using your rotary tool.
Free up a hand while using your Dremel on a workpiece.
Cut holes, slots, and shapes in workpieces.
Create stable, controlled cuts in tile or grout with a guide and bit that allow maximum visibility.
For engraving and carving, these kits contain a variety of Dremel-compatible bits and stones.
Convert your rotary tool into a small router table to slot, edge, groove, and sand items in both conventional and irregular shapes.
Engrave, etch, carve, and polish with precise control. These grips shift the weight of your tool to your palm for a balanced feel and less fatigue.
Keep a variety of bits on hand for routing, inlaying, and mortising in wood and other soft materials.
Convert your bench-mount motor or drill to a flexible-shaft grinder.
Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.
The lightweight, pencil-sized grinder in these kits works at high speeds and is more durable than light duty grinders, making it good for frequent use.
Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.
Convert your threaded grinder spindle into a 5/8"-11 size that's compatible with common grinding wheels and sanding discs.
Secure the shank into the collet or chuck of your tool. Attach the quick-change fastener on the sanding disc to the corresponding fastener on the backup pad.
The flexible edge of the sanding disc overhangs these backup pads.
Secure the shank into the collet or chuck of a tool.
The threaded head on these arbors holds a grinding cone.
Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.
Attach cutoff wheels to a Dremel grinder.
Use flap wheels with a threaded stud in tools that accept a shank.
Adapt flap wheels with a threaded stud for use on tools that have a threaded spindle.
Attach flap wheels with an arbor hole to tools that accept a shank.
Also known as cross- and square-sanding pad shank adapters, these arbors are required to attach sanding pads for internal and irregular surfaces to hand-held drills and die grinders.
The extra-coarse threads on these arbors provide a stronger hold on the sanding roll.
The arbor’s shank attaches to hand-held drills and die grinders. Threads on the body hold the sanding roll in place.
Thread rubber-cushioned grinding bits onto one of these arbors to use them in drills and die grinders.
Mount wheel brushes that have an arbor hole to hand-held drills and die grinders.
Made of nonsparking aluminum-bronze.
This drum is required to use a sanding sleeve with a Dremel grinder.
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve.
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.
Pair with Dremel rotary tools to securely grip bits and burs.
The shank on these spindles installs directly into grinder collets and drill chucks.
A special fastener on the back of these discs allows you to easily swap one disc for another.
The premium abrasive stays sharp longer.
These discs have a harder abrasive than standard quick-change discs.
These discs have a harder abrasive than standard flexible-edge quick-change discs.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
The heavy duty construction provides more support than standard discs for heavy material removal.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
Debur, clean, and blend faster than other nylon mesh discs.
Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.
Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.
These discs have a long-lasting diamond abrasive.
The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.
These discs are abrasive-embedded cloth with a cushioned layer.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Secure the shank into the collet or chuck of your tool.
A coating prevents dust and debris from building up on the abrasive surface.
Press onto a compatible sanding tool or backup pad; peel off to remove.
Set at an angle and widely spaced, the flaps reach into corners.
Assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
Extend your reach with these 3" to 7¼" long burs.
Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.
Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastics without clogging.
Diamond-cut teeth effectively cut hard materials.
Pointed teeth cut wood and rubber quickly without clogging.
Extend your reach with these 6 1/4" to 7" long burs.
A ceramic alumina abrasive cuts through stainless steel.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.
Use these wheels for cutting soft metal, plastic, stone, and wood.
A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.
These blades have a continuous edge with diamond grit to cut through ceramics.
Cut plastic, wood, and soft metal such as aluminum, brass, and copper.
The segmented edge on these blades is coated with diamond grit for cutting plastic.