Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.

Extended positioning arms lock into position when you tighten the screws in the joints. Those with a cable-routing hole are hollow, so you can route cables through them.

Ball-grip positioning arms have ball-and-socket connections, so the entire arm moves 360°. Secure items using the mounting plate.

Arms with AMPS mounting hole pattern are often used on GPS units, cameras, and other small electronics.

For technical drawings and 3-D models, click on a part number.

These arms have a VESA (Video Electronics Standards Association) standard mounting hole pattern to attach a monitor.

Threaded hole and clamp-on arms have gas springs that counterbalance monitor weight to keep the arm in position.

For technical drawings and 3-D models, click on a part number.

Screw-on arms can bend to hold a tablet in almost any position. They have a keyed lock for added security.

For technical drawings and 3-D models, click on a part number.

Snap laptops and tablets into these holders to mount them on stands and positioning arms. All holders have a standard Video Electronics Standards Association (VESA) mounting hole pattern, so they’ll work with a variety of device mounts. To prevent removal, lock your device in place with the included key.

Clamp an outlet strip to your work surface to quickly plug in and unplug devices. Snap an outlet strip into the front of the holder and route cables down the back. To install, slide the clamp onto the surface's edge and tighten the adjustment knob by hand.

Heavy duty construction adds strength for higher load capacities than other positioning arms. Choose a complete arm or select a base, connectors, and plate, bracket, or tray to build a complete arm. The load capacity of an assembled arm is determined by the component with the lowest capacity.

For technical drawings and 3-D models, click on a part number.

Ball-and-socket connections allow 360° positioning. Choose a complete arm or select a base, connectors, and a plate, grip, holder, or tray to build a complete arm.

For technical drawings and 3-D models, click on a part number.

Display documents on a desktop or other flat surface using these binders, which have a sanitary design. They contain a silver ion compound that prevents the growth of bacteria, mold, and other microbes, limiting the spread of germs as people flip through them. These binders are good for offices, warehouses, clinics, hospitals, and other shared spaces. Made of steel, they stand up to the wear and tear of daily use.

Binders come with 10 protectors for holding documents such as menus, pamphlets, operating instructions, and safety procedures. These protectors are plastic, so they shield fragile paper from rips, tears, and liquid. They remain rigid as you flip through them thanks to their reinforced edges. Snap them in and out of the binders as needed. Each binder can hold up to two additional bindings.

Use index tabs to mark specific pages and organize your binder.

Product registration requirements restrict sales to the listed areas.

Mount these binders to machines, equipment, walls, and flat surfaces to create permanent viewing spots and free up desk space—they display documents in a way that’s sanitary for all users. Containing a silver ion compound that prevents the growth of bacteria, mold, and other microbes, they limit the spread of germs as people flip through them. Use these binders in shared spaces such as offices, warehouses, clinics, and hospitals.

Each binder comes with 10 protectors for holding documents such as menus, pamphlets, operating instructions, and safety procedures. The protectors are plastic, so they shield fragile paper from rips, tears, and liquid. To remain rigid as you flip through, they have reinforced edges. Snap them in and out of the binders as needed.

Stainless steel binders resist rust and corrosion, so they’re better for wet and humid environments, outdoor locations, and areas that are exposed to washdowns.

Optional stands and mounts add different mounting capabilities. Desk stands sit on any flat surface and tilt binders at an angle for easy reading. Adjustable-arm and telescoping mounts clamp onto the lip of a desk or counter and save space by holding documents in the air. Raise and lower them to the right height; adjustable-arm mounts also rotate and pivot to switch between users.

Add index tabs to mark specific pages and organize your binder.

Product registration restrictions restrict sales to the listed areas.

These binders mount to machines, equipment, and walls. Rigid document protectors allow you to quickly flip through these carousel-style binders. Protectors snap in and out.

Multi-document protectors have four clear plastic sleeves attached to single rigid protector, so you can place more documents in your binder.

Index tabs clip onto document protectors to organize your binder.

Desk stands allow you to mount up to six binders for freestanding use.

Adjustable-arm and telescoping mounts clamp to the edge of a desk or shelf and hold up to two binders. Adjustable-arm mounts pivot up and down. Telescoping mounts can be raised or lowered to the height you need.

Place these on top of a machine or table, then relocate them as you see fit. Rigid document protectors allow you to quickly flip through these carousel-style binders. Protectors snap in and out. Each binding holds up to ten protectors.

Multi-document protectors have four clear plastic sleeves attached to single rigid protector, so you can place more documents on your binder.

Index tabs clip onto document protectors to organize your binder.

Hang your human-machine interface and swivel it around to save floor space and comfortably access touch screens, buttons, and other operating equipment. These suspension arms have already-drilled mounting holes that match our HMI enclosures. Route wire from your HMI components to a machine through a hole that runs through the entire arm. To prevent them from swinging too far and hitting people and equipment, locking pins let you restrict how far these arms rotate. Brakes lock their position into place.

Customize a system for your application—you can create hundreds of different variations. A complete suspension arm requires at least a base, a tube, and a mount. Add components to extend your arm up to 80” from the base and expand its range of motion. Arms without a connector support up to 180 lbs. Those with a connector support up to 135 lbs., but the load it can hold decreases by 2 lbs. for every 1” over 40” from the base.

Bases mount your arm to a surface. Bench-top bases mount to horizontal surfaces, such as the top of a machine.

For technical drawings and 3-D models, click on a part number.