Also known as bevel protractors, set bevels and measure angles with the adjustable arm. All have graduations from 0° to 180° in both directions. They have a corrosion-resistant satin-chrome finish that reduces glare and wear-resistant etched markings.

Measure angles and dimensions with one tool. Protractor has graduations from 0° to 180° in both directions. Also known as a bevel protractor, it has an adjustable arm. The arm is narrow to fit into holes for use as a depth gauge. It has a corrosion-resistant satin-chrome finish that reduces glare and wear-resistant etched markings.

Use this protractor to measure angles and dimensions. It has graduations from 0° to 180° in both directions. Protractor is corrosion-resistant stainless steel with wear-resistant etched markings. Also known as a bevel protractor, it has an adjustable arm. The arm is narrow to fit into holes for use as a depth gauge.

Small enough to fit in your pocket, this versatile tool measures angles and dimensions and has a center finder. Also known as a bevel protractor, it has an adjustable arm. Protractor is corrosion-resistant stainless steel with wear-resistant etched markings.

With a calibration certificate traceable to NIST that says they’ve passed a test for accuracy, you can trust these protractors to measure angles on molds and jigs precisely. They have angle graduations from 0° to 90° in four quadrants. Also known as bevel protractors, they have an adjustable arm. These protractors are satin chrome-plated to resist corrosion and reduce glare. Their etched markings are wear resistant.

Precisely measure angles on molds and jigs. This protractor has angle graduations from 0° to 90° in four quadrants. Also known as a bevel protractor, it has an adjustable arm. Protractor has a corrosion-resistant satin chrome-plated finish that reduces glare and wear-resistant etched markings. To measure angles from 0° to 90°, add an acute-angle attachment.

Take precise measurements with this protractor. It has angle graduations from 0° to 90° in four quadrants. Use it to measure molds and jigs. Also known as a bevel protractor, it has an adjustable arm. Protractor has a corrosion-resistant satin chrome-plated finish that reduces glare and wear-resistant etched markings.

These tools have one digital display and a lock to hold the arms in position.

A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle. It also has a lock to hold the arm in position, a hold button that freezes the display, auto shutoff, and 1/4"-20 threads for connecting to a tripod.

Temporarily mount these indicators to a metal surface. They have four quadrants that each read any angle from 0° to 90°.

V-groove provides stability on curved surfaces.

For technical drawings and 3-D models, click on a part number.

Also known as angle finders, use these to gauge the angle of any surface. Angle indicators have two measuring quadrants that read angles from 0° to 90°. They also have a gauge for pitch (in./ft.).

For technical drawings and 3-D models, click on a part number.

These angle indicators display highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze the reading on the display. Indicators have machined leveling surfaces, a V-groove for stability on curved surfaces, and two 6-32 threaded holes for mounting.

Angle indicator with an RS-232 computer connection can be used for ASCII output.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy. The display shows highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze the reading on the display. Indicators have machined leveling surfaces, a V-groove for stability on curved surfaces, and two 6-32 threaded holes for mounting.

Angle indicator with an RS-232C computer connection can be used for ASCII output.

Check the angle of your horizontal surface side-to-side and front-to-back. These indicators have a highly accurate sensor and precision ground stainless steel base. The LCD display shows slope, level, and angle in numerical values along with an image of a manual angle indicator. If you flip them so the LCD display is upright, they’ll automatically switch from checking two angles to check a single angle on a horizontal or vertical surface. They come with cable and a wall plug adapter for charging.

Because it’s stainless steel, the base makes these indicators a durable choice for industrial applications where plastic-bodied indicators would be too fragile. Mount them to equipment, even if it’s vibrating, to repeatedly check angles. A V-groove provides stability on curved surfaces.

Align guide rails or lay pipe at specific angles from a flat surface. The laser light is red and is best viewed indoors. The display shows the precise angle of the beam and rotates for overhead measurements. The audible level indicator tells you when the tool is level and plumb.

These magnetic compasses provide your orientation relative to geographic points.

The angled rollers on these wheels allow vehicles to move forward, backward, sideways, and turn in place when each wheel is used with an independent drive. Often used on automated vehicles and in robotics, they are also known as mecanum wheels. A left and a right wheel must be paired together to use all of the movement combinations.

Use hubs to connect the wheel to a shaft.

For technical drawings and 3-D models, click on a part number.

Find the center of square and round materials, such as structural framing and pipe, and determine setup angles on milling machines and grinders.

Use the clockwise dial for moving in a counterclockwise direction. Use the counterclockwise dial for moving in a clockwise direction.