These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

Use these bearings where high speed and precision are not required.

Mount these bearings onto a hex shaft.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

The flange ensures proper positioning inside a tube or housing.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Keep shafts, such as those with a shoulder, clear of the mounting surface. These bearings have a higher mounting base that gives them more space to the mounting surface than standard mounting bases.

Use these bearings in corrosive environments and under water.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Synthetic grease or graphite enables these bearings to operate in high temperatures.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

A bolt in each corner makes for a secure, even hold.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Made of high-performance plastic, these insert bearings last longer than metal insert bearings. They also don’t require lubrication.

Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.