Filter by
Material
Export Control Classification Number (ECCN)
REACH
DFARS Specialty Metals
RoHS
Dead Centers
Dead centers are one solid piece. Use them in the headstock when machining between centers or in the tailstock to support the end of a workpiece when friction is not a concern.
Carbide-tipped hardened steel dead centers have better wear resistance than hardened steel dead centers.
| Morse Taper Number | Point Dia. | Point Lg. | Taper Lg. | Overall Lg. | Morse Taper Dia. | Point Angle  | TIR (Total Indicated Runout) Accuracy | Each | |
Hardened Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 0.475" | 13/32" | 2 1/8" | 3 5/16" | 0.475" | 60° | 0.00005" | 000000 | 0000000 |
| 2 | 0.7" | 39/64" | 2 9/16" | 4 3/16" | 0.7" | 60° | 0.00005" | 000000 | 000000 |
| 3 | 0.938" | 13/16" | 3 3/16" | 5 1/4" | 0.938" | 60° | 0.00005" | 000000 | 000000 |
| 4 | 1.231" | 1 1/16" | 4 1/16" | 6 3/4" | 1.231" | 60° | 0.00005" | 000000 | 000000 |
| 5 | 1.748" | 1 33/64" | 5 3/16" | 8 1/2" | 1.748" | 60° | 0.00005" | 000000 | 000000 |
Carbide-Tipped Hardened Steel | |||||||||
| 1 | 0.475" | 13/32" | 2 1/8" | 3 5/16" | 0.475" | 60° | 0.00005" | 00000000 | 000000 |
| 2 | 0.7" | 39/64" | 2 9/16" | 4 3/16" | 0.7" | 60° | 0.00005" | 00000000 | 000000 |
| 3 | 0.938" | 13/16" | 3 3/16" | 5 1/4" | 0.938" | 60° | 0.00005" | 00000000 | 000000 |
| 4 | 1.231" | 1 1/16" | 4 1/16" | 6 3/4" | 1.231" | 60° | 0.00005" | 00000000 | 000000 |
| 5 | 1.748" | 1 33/64" | 5 3/16" | 8 1/2" | 1.748" | 60° | 0.00005" | 00000000 | 000000 |