Tie-Down Rings
These rings pivot to secure loads in various directions.
Style L accept carriage bolts with a square neck. The neck shape keeps bolts from turning when tightening with a nut.
Zinc-plated steel and powder-coated steel rings have mild corrosion resistance.
18-8 stainless steel rings have good corrosion resistance.
316 stainless steel rings have excellent resistance to salt water and chemicals.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Dia. | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | Each | |
Zinc-Plated Steel | ||||||||||||||||
| A | 500 | 2" | 2 1/4" | 1/4" | D-Ring | __ | 1 5/16" | 1 5/8" | Zinc-Plated Steel | No | 1 | 13/32" | __ | __ | 0000000 | 00000 |
| A | 1,000 | 1 7/16" | 1 1/2" | 1/4" | D-Ring | __ | 1 5/8" | 1 3/8" | Zinc-Plated Steel | No | 1 | 7/16" | __ | __ | 00000000 | 0000 |
| C | 200 | 1 9/16" | 1 13/16" | 3/16" | D-Ring | 4 1/8" | __ | __ | Zinc-Plated Steel | No | 2 | 9/32", 13/32" | __ | 1 1/16" | 00000000 | 0000 |
| D | 500 | 2" | 2 1/4" | 1/4" | D-Ring | 4 1/16" | __ | __ | Polypropylene Plastic | No | 3 | 9/32", 13/32" | __ | 1 3/16" | 0000000 | 0000 |
| E | 400 | 1 1/2" | 1 11/16" | 1/4" | D-Ring | __ | 2 3/16" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 1 1/4" | 0000000 | 0000 |
| E | 800 | 1" | 1 13/16" | 1/4" | D-Ring | __ | 2 1/8" | 13/16" | Zinc-Plated Steel | No | 2 | 9/32" | __ | 1 3/8" | 0000000 | 0000 |
| E | 1,000 | 1 1/2" | 1 3/8" | 1/4" | D-Ring | __ | 1 5/8" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 15/16" | 0000000 | 0000 |
| E | 1,000 | 1 1/2" | 1 13/16" | 1/4" | D-Ring | __ | 1 9/16" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 7/8" | 00000000 | 0000 |
| E | 1,500 | 2" | 2 1/8" | 1/4" | D-Ring | __ | 2 1/8" | 1 7/8" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 1 3/8" | 00000000 | 0000 |
| J | 3,500 | 2 5/16" | 1 3/4" | 5/16" | D-Ring | __ | 2 1/8" | 1 7/8" | Zinc-Plated Steel | No | 4 | 1/4" | 1 1/4" | 1 1/8" | 0000000 | 00000 |
| J | 3,500 | 3 3/16" | 3 3/4" | 5/16" | D-Ring | __ | 2 3/16" | 2 1/2" | Zinc-Plated Steel | No | 4 | 1/4" | 1 3/8" | 1 3/4" | 0000000 | 00000 |
Black Zinc-Plated Steel | ||||||||||||||||
| B | 800 | 1 5/8" | 2 1/8" | 1/4" | D-Ring | __ | 1 9/16" | 1 5/8" | Zinc-Plated Steel | No | 1 | 13/32" | __ | __ | 00000000 | 0000 |
Steel | ||||||||||||||||
| L | 4,080 | 2 3/8" | 3 1/2" | 1/2" | D-Ring | __ | 3" | 1 3/4" | Steel | No | 2 | 13/32" | __ | 2" | 0000000 | 0000 |
18-8 Stainless Steel  | ||||||||||||||||
| A | 400 | 1 1/2" | 1 1/2" | 3/16" | D-Ring | __ | 1 5/16" | 1 1/8" | 18-8 Stainless Steel | No | 1 | 3/8" | __ | __ | 00000000 | 0000 |
| E | 400 | 1" | 1 1/2" | 3/16" | D-Ring | __ | 2" | 5/8" | 18-8 Stainless Steel | No | 2 | 9/32" | __ | 1 3/8" | 00000000 | 00000 |
| G | 1,000 | 1 1/2" | 1 1/2" | 1/4" | D-Ring | __ | 2 1/4" | 2" | 18-8 Stainless Steel | No | 3 | 9/32" | 1 1/2" | 1 1/4" | 00000000 | 00000 |
| G | 1,500 | 2" | 2 1/8" | 5/16" | D-Ring | __ | 3" | 2 1/2" | 18-8 Stainless Steel | No | 3 | 11/32" | 2" | 1 1/2" | 00000000 | 00000 |
| H | 1,500 | 9/16" | 1 3/16" | 1/4" | D-Ring | __ | 1 5/8" | 1 3/4" | 18-8 Stainless Steel | No | 3 | 1/4" | 9/16" | 9/16" | 00000000 | 00000 |
| H | 2,500 | 1 3/8" | 1 3/8" | 5/16" | D-Ring | __ | 2 3/16" | 2 1/4" | 18-8 Stainless Steel | No | 3 | 5/16" | 1 3/8" | 1 3/8" | 00000000 | 00000 |
| H | 5,000 | 2 5/16" | 2 1/16" | 3/8" | D-Ring | __ | 2 5/8" | 2 15/16" | 18-8 Stainless Steel | No | 3 | 13/32" | 1 3/4" | 1 3/4" | 00000000 | 000000 |
316 Stainless Steel | ||||||||||||||||
| A | 50 | 13/16" | 7/8" | 1/8" | D-Ring | __ | 13/16" | 11/16" | 316 Stainless Steel | No | 1 | 1/4" | __ | __ | 00000000 | 0000 |
| E | 210 | 1 17/32" | 1 5/16" | 0.23" | D-Ring | __ | 2" | 1 1/8" | 316 Stainless Steel | No | 2 | 1/4" | __ | 1 11/32" | 00000000 | 0000 |
| F | 1,200 | 1 3/32" | 1 1/8" | 1/4" | D-Ring | __ | 1 1/2" | 1" | 316 Stainless Steel | No | 2 | 7/32" | __ | 15/16" | 00000000 | 00000 |
| F | 2,000 | 1 15/32" | 1 5/16" | 5/16" | D-Ring | __ | 1 15/16" | 1 3/8" | 316 Stainless Steel | No | 2 | 5/16" | __ | 1 1/4" | 00000000 | 00000 |
| F | 4,000 | 1 15/16" | 1 9/16" | 3/8" | D-Ring | __ | 2 1/2" | 1 3/4" | 316 Stainless Steel | No | 2 | 13/32" | __ | 1 5/8" | 00000000 | 00000 |
Recessed Tie-Down Rings
These rings mount flush and fold down when not in use.
Straight rings have a flat section that prevents webbing from twisting.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
For Cutout | Ring | Base | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Dp. | Dia. | For Max. Webbing Wd. | Inner Wd. | Ht. | Thick. | Dia. | Material | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | No. of | Each | |
Zinc-Plated Steel | |||||||||||||||
D-Ring | |||||||||||||||
| 2,000 | 1" | 4 1/2" | __ | 3 3/8" | 1 13/16" | 5/16" | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 000000 |
D-Ring and Straight Ring | |||||||||||||||
| 830 | 1" | 4 1/2" | 2" | 2 7/8", 2 1/8" | 1 1/2", 1 3/16" | 3/8", 3/8" | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 00000 |
Webbing Anchor Plates
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity, lbs. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Each | |
Zinc-Plated Steel | ||||||||
| 1" | 330 | 2 1/16" | 1 9/16" | No | 1 | 1/2" | 0000000 | 00000 |
| 1 3/4" | 5,000 | 2 7/8" | 2 3/8" | No | 1 | 25/32" | 0000000 | 00000 |
| 2" | 1,000 | 1 7/8" | 2 3/4" | No | 1 | 1/2" | 0000000 | 0000 |
18-8 Stainless Steel | ||||||||
| 1" | 500 | 2 1/16" | 1 9/16" | No | 1 | 1/2" | 0000000 | 00000 |
| 1 3/4" | 3,900 | 2 7/8" | 2 3/8" | No | 1 | 25/32" | 0000000 | 00000 |
Webbing Guides
Use these guides to prevent webbing from twisting, or use as anchor points in tie-down applications. They are also known as footman's loops.
Nylon plastic guides are chemical and oil resistant, nonconductive, and lightweight.
High-carbon steel guides are stronger and more scratch resistant than stainless steel guides. However, unfinished carbon steel is not corrosion resistant and should be used indoors.
Stainless steel guides have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Guides with a zinc plating have mild corrosion resistance. Guides with a nickel plating resist chemicals and salt water, and have a decorative metallic finish.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Low-Carbon Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 3/16" | 2 1/8" | 10 | 0000000 | 000000 |
| 1 1/2" | 3 1/16" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
| 1 1/2" | 3 1/8" | 1/2" | 1/4" | 7/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
| 2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 9/32" | 3 1/8" | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated High-Carbon Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 00000 |
| 1" | 2 5/8" | 1/2" | 1/4" | 5/8" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 0000 |
Nickel-Plated High-Carbon Steel | |||||||||||
| 2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 1 | 0000000 | 0000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Dull 18-8 Stainless Steel | |||||||||||
| 1" | 2 5/8" | 7/16" | 1/4" | 1/4" | No | 2 | 3/16" | 2 1/8" | 1 | 0000000 | 00000 |
| 2" | 3 7/8" | 1/2" | 5/16" | 5/16" | No | 2 | 1/4" | 3 1/8" | 1 | 0000000 | 0000 |
| Each | |||||||||||
Polished 18-8 Stainless Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 3/16" | 2 1/8" | __ | 0000000 | 0000 |
| 1 1/2" | 3 1/4" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | __ | 0000000 | 0000 |
| 1 1/2" | 3 1/4" | 1/2" | 1/4" | 7/16" | No | 2 | 1/4" | 2 5/8" | __ | 0000000 | 0000 |
| 2" | 3 3/4" | 1/2" | 1/4" | 5/16" | No | 2 | 9/32" | 3 1/8" | __ | 0000000 | 0000 |
Snap-In Load-Securing Plates
Also known as E-track, use these plates for a tie-down system in places where full lengths of track won't fit.
Snap straps, anchor points, and other accessories into Style A, B, and C plates.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Style | Capacity, lbs. | Lg. | Wd. | Color | Mounting Fasteners Included | Mounting Hole Lg. | Mounting Hole Wd. | Ctr.-to-Ctr. Slot Lg. | Each | |
Powder-Coated Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A | Not Rated | 1" | 5 3/4" | Black | No | 5/16" | 5/16" | __ | 00000000 | 00000 |
Zinc-Plated Steel | ||||||||||
| A | Not Rated | 1" | 5 3/4" | __ | No | 5/16" | 5/16" | __ | 00000000 | 0000 |
| C | Not Rated | 5 1/4" | 6 3/8" | __ | Yes | 13/32" | 13/32" | 2" | 00000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| A | Not Rated | 1" | 5 3/4" | __ | No | 5/16" | 5/16" | __ | 00000000 | 0000 |
Horizontal Snap-In Load-Securing Track
Use this track, also known as E-Track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
Galvanized steel track is corrosion resistant.
Aluminum track has excellent corrosion resistance and can easily be drilled through to mount.
For technical drawings and 3-D models, click on a part number.
Vertical Snap-In Load-Securing Track
Use this track, also known as E-track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
For technical drawings and 3-D models, click on a part number.