FDA compliant to safely touch food and threaded for a tight hold, these connectors won’t vibrate loose as they send high-speed data to sensors and other automated devices in food, beverage, and pharmaceutical plants. They stand up to brief submersion as well as high-heat washdowns and harsh cleaners common to food lines, thanks to their IP ratings, TPE insulation, and stainless steel and polypropylene housing. Their insulation also means they’re flexible and won’t break down from abrasion or UV exposure. Overall, they’re more rugged than traditional RJ45 connectors.

To reduce the risk of signal loss between equipment, these connectors block signal interference from nearby devices. Poles and keyways on their face adhere to standard coding layouts, keeping you from mis-mating connections. D coded, these connectors are often used within Ethernet/IP, Profinet, and EtherCat systems. They can also power devices as they send data, so you don’t need a separate power cord. But, your device must be Power over Ethernet (PoE) compatible.

When choosing an Ethernet connector, make sure you match or exceed your network’s category industry designation. These connectors are backward compatible—for example, a Category 6 connector will work in a Category 5 network, but it’ll only run at the Category 5 speed.

For technical drawings and 3-D models, click on a part number.

The threaded end of these M8 connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords. They are often used with sensors, switches, and I/O modules. To protect against signal interference, these connectors are shielded. Connectors are Power over Ethernet (POE) enabled to carry data and power within one connector.

To view wiring diagrams, select a part number and click Product Detail.

Snap-on wire connections pierce wire insulation, eliminating the need for wire stripping. They maintain a secure hold in high-vibration applications.

Connectors with a polyurethane cable bend easily, so they are ideal for applications that require continuous flexibility such as robotics. They also resist oil.

These connectors are IP rated when mated. IP65 rated connectors protect against dust and low-pressure jets of water. IP67 rated connectors keep out dust and water from temporary submersion.

For technical drawings and 3-D models, click on a part number.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs). These cords can also power devices as they send data, so you don’t need a separate power cord. But, the device must be Power over Ethernet (PoE) compatible. They’re often used with EtherNet/IP, Profinet, and EtherCAT systems. With TPE insulation, they stand up to bending in robotics applications. It also means they resist abrasion and won’t pit or crack from chemicals, sunlight, and welding runoff.

Thanks to its threads and IP rating, the M12 end is water and dust tight when mated. Poles and keyways on its face adhere to standard coding layouts, which reduces the chance of mismatching connections.

When choosing an Ethernet cord, make sure you match or exceed your network’s ethernet cable category. These cords are backward compatible—for example, a Category 6 cord will work in a Category 5 network, but it’ll only run at the Category 5 speed.

Use unshielded cords where signal interference is not a concern. Double-shielded cords have layers of braid and foil that block signal interference from nearby devices, maintaining their speed and data integrity.

Cords with a 90° elbow run along the side of equipment, so they fit behind machines and in tight spaces.

Add caps to protect connectors and maintain their IP rating when not in use.

For technical drawings and 3-D models, click on a part number.

The M12 threaded ends on these cords seal out contaminants and resist coming loose from vibration better than the RJ45 ends on traditional Ethernet cords. Use them in tough, rugged environments to send high-speed data between sensors, switches, servers, computers, and PLCs not protected by control panels. These cords can power devices as they send data, as long as devices are Power over Ethernet (PoE) compatible. They are often used within Ethernet/IP, Profinet, and EtherCat systems. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connections.

All cords are backward compatible, so they work in networks that meet the same or lower ethernet cable category. For example, a Category 6 cord will work in a Category 5 network, but it will only run at the Category 5 speed.

With either TPE or polyurethane insulation, all cords stand up to harsh factory conditions, chemicals, and UV rays. All are also highly flexible, so they’re good for jobs with continuous motion, such as robotics. TPE-insulated cords resist abrasion and won’t pit or crack from welding runoff. Oil-resistant polyurethane-insulated cords are free of halogen, so they’re safer than most plastic as they won’t release toxic fumes or corrode metal.

Use unshielded cords where signal interference is not a concern. Double-shielded cords have layers of braid and foil that block signal interference from nearby devices, preventing impact to transmission speeds and data.

90° elbow cords sit flush against equipment, so they fit behind machinery in areas where space is tight.

When mated, all cords are IP67 rated to protect against dust and temporary submersion. IP65-rated cords stand up to washdowns. IP66K-rated cords stand up to high-pressure washdowns.

Add caps to protect cords and maintain their IP ratings when not in use.

For technical drawings and 3-D models, click on a part number.

Unlike the RJ45 ends on traditional Ethernet cords, the threaded M8 ends on these cords keep contaminants out and resist coming loose from vibration. They are often used with sensors, switches, I/O modules, and computers. Braided shielding protects against signal interference. Insulated with polyurethane, these cords bend easily, so they are ideal for applications that require continuous flexibility such as robotics. They also resist oil. When mated, they are IP67 rated for protection from dust and temporary submersion.

D-coded cords are Power over Ethernet (POE) enabled to carry data and power within one cord.

For technical drawings and 3-D models, click on a part number.