Turn machinery, such as paint and conveyor lines, on and off after a set period of time.

Control multiple timing functions from your electrical cabinet—these timer relays mount to 35 mm DIN rail (also known as DIN 3 rail), which is the most commonly used size.

Mount these timer relays directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Unlike mechanical relays, they have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Get a variety of timing functions in a single relay.

Considered solid state because they don’t have any moving parts, these timer relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, preventing damage to your components from voltage spikes, amplifying the relay's signal, and reducing signal interference. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Reduce voltage fluctuations and stress on shafts and bearings when starting up three-phase motors. These timer relays start with motor contacts in a star configuration, then switch to a delta configuration after a set delay.

Program these switches to turn a device on and off at a set time and day.

Switches fit single device (1 gang) outlet boxes.

Install these switches in a panel cutout.

Rated NEMA 3R, these rain-tight switches protect against falling liquids and light splashing.

Mount these switches to a flat surface or attach to DIN rail.

Rated NEMA 3R, these rain-tight switches protect against falling liquids and light splashing.

Control equipment with high currents such as air conditioners, heaters, and ventilation fans.

Install these switches in a panel cutout to automatically turn electrical equipment on or off after a set interval.

The large face makes these switches easy to read from a distance.

Connect and communicate with multiple automation devices simultaneously, such as HMIs, motor speed controls, supervisory PCs, and additional PLC racks. These modules allow several systems to talk to one another—within your facility and beyond—letting you expand your automated processes over numerous interconnected networks.

No need to program multiple PLCs—these modules expand your automated system, keeping everything conjoined and configured on one processor. Use them when you’re out of space on your DIN rail or need additional input/output functions.

Combine the functionality of a PLC and the accessibility of a development board. Built around a Raspberry Pi and an Arduino-enabled microcontroller, these controllers use open-source software to make programming and troubleshooting convenient.

Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs.