These multifunction tools have a 90° pointed tip that allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. All are center cutting, allowing plunge cuts into a surface.

For technical drawings and 3-D models, click on a part number.

Drill, rout, and trim with the same bit. The unique shape on these bits was originally used for aircraft panels. They have a pointed end and spiral flutes, like a drill bit, making downward plunge cuts easier than with square-cut and straight-flute bits. The spiral flutes also leave a smoother finish. The flutes lift chips up from the workpiece for applications that require a clean finish on the bottom edge of the cut. Securely clamp your material before routing to prevent lifting.

These bits are made of high-speed steel for general purpose use. They can be used with hand tools, router tables, and CNC machines. These bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Bits with four flutes produce a smoother finish than three-flute bits.

For technical drawings and 3-D models, click on a part number.

The sharp cutting edges and flute shapes of these tools are specifically designed to cut through tough composite materials, such as carbon fiber and fiberglass, with minimal resistance. This means less strain on your router and more control when cutting, leading to smooth cuts. They're made of solid carbide for longer tool life and faster cutting speeds than high-speed steel.

Diamond-Pattern Flutes—Small, staggered teeth aggressively cut, yet leave a smooth finish.

Trapezoid-Pattern Flutes—Like diamond-pattern flutes, but with overlapping cutting edges for an even smoother cut.

Bits with a drill/mill cut style have a pointed end for easier plunge cuts than bits with a square cut style.

Plunge-cutting bits let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work, such as trimming, contouring, and finishing.

For technical drawings and 3-D models, click on a part number.