Flush-Cut Angle Grinder Cutoff Wheels for Metal
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Thread Size  | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
| 3/32" | 5/8"-11 | 10,000 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
7" Dia. | ||||||||||
| 3/32" | 5/8"-11 | 8,600 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
Flush-Cut Angle Grinder Cutoff Wheels for Stainless Steel
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
6" Dia. | |||||||||
| 3/32" | 7/8" | 10,200 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 30 | 00000000 | 00000 |
Angle Grinder Cutoff Wheels for Aluminum, Brass, and Copper
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.062" | 7/8" | 8,600 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 30 | 0000000 | 00000 |
Angle Grinder Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Fast-Cut Bench-Top Cutoff Saw Wheels for Metal
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
12" Dia. | ||||||||||
| 3/32" | 1" | 5,090 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
14" Dia. | ||||||||||
| 3/32" | 1" | 4,365 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
16" Dia. | ||||||||||
| 3/32" | 1" | 3,820 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
Bench-Top Cutoff Saw Wheels for Metal Tubing and Extrusions
Make burr-free cuts in metal tubing and extrusions, such as strut channels and rails. Designed to slice through hard metals, these wheels are made of bonded abrasives. They’re reinforced with two layers of fiberglass mesh for increased stability and strength compared to other bench-top cutoff wheels. This reinforcement also results in less vibration for a cleaner cut. These cutoff wheels are not for use with hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
12" Dia. | ||||||||||
| 0.0938" | 1" | 5,100 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
14" Dia. | ||||||||||
| 0.0938" | 1" | 4,400 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
16" Dia. | ||||||||||
| 0.1094" | 1" | 3,800 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
Bench-Top Cutoff Saw Wheels for Stainless Steel
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels. They’re reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
14" Dia. | |||||||||
| 3/32" | 1" | 4,365 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | 30 | 0000000 | 000000 |
Bench-Top Cutoff Saw Wheels for Aluminum, Brass, and Copper
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Multipurpose Bench-Top Cutoff Saw Wheels
From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel. Made of silicon carbide and aluminum oxide abrasives, these wheels won’t clog or burn when cutting through nonmetals. Attach them to your bench-top cutoff saw to make burr-free cuts in pipes, bars, and sheets. You shouldn’t use these wheels with handheld saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
| 1/8" | 1" | 4,400 | Type 1 | Straight | Aluminum Oxide/Silicon Carbide | Fiberglass Mesh | Aluminum, Brass, Ceramics, Concrete, Copper, Fiberglass, Iron, Plastic, Rubber, Stainless Steel, Steel, Stone, Wood | 30 | 0000000 | 000000 |
Bench-Top Cutoff Saw Wheels for Titanium
Made from bonded silicon carbide abrasives, these wheels slice through titanium, one of the hardest materials to cut. Designed to make smooth, burr-free cuts, they cut faster and stay sharp longer than wheels made with aluminum oxide abrasives. Use them to cut bars, sheets, and tubing into manageable pieces. Not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Floor-Mount Cutoff Saw Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
| 1/8" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
14" Dia. | ||||||||||
| 1/8" | 1" | 4,365 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
16" Dia. | ||||||||||
| 5/32" | 1" | 3,820 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
18" Dia. | ||||||||||
| 3/16" | 1" | 3,395 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
20" Dia. | ||||||||||
| 3/16" | 1" | 3,065 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
Portable Cutoff Saw Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
12" Dia. | |||||||||
| 1/8" | 1" | 6,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 000000 |
| 1/8" | 20 mm | 6,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
14" Dia. | |||||||||
| 1/8" | 1" | 5,400 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
| 1/8" | 20 mm | 5,460 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
Multipurpose Portable Cutoff Saw Wheels
Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
12" Dia. | |||||||||||
| 1/8" | 20 mm | Round | 6,400 | Type 1 | Straight | Aluminum Oxide/Silicon Carbide Blend | Fiberglass Mesh | Aluminum, Brass, Carbide, Concrete, Copper, Hastelloy, Inconel, Masonry, PVC, Rubber, Stainless Steel, Steel, Stone | 30 | 0000000 | 000000 |
14" Dia. | |||||||||||
| 1/8" | 20 mm | Round | 5,500 | Type 1 | Straight | Aluminum Oxide/Silicon Carbide Blend | Fiberglass Mesh | Aluminum, Brass, Carbide, Concrete, Copper, Hastelloy, Inconel, Masonry, PVC, Rubber, Stainless Steel, Steel, Stone | 30 | 0000000 | 00000 |
RotoZip Spiral Saw Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
3 1/2" Dia. | |||||||||
| 0.09" | 11.1 mm | 20,000 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |