Bench Grinder Cutoff Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
8" Dia. | ||||||||||
1/16" | 5/8" | 7,640 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 000000 |
Smooth-Cut Bench Grinder Cutoff Wheels for Metal


An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
8" Dia. | ||||||||||
1/16" | 1 1/4" | 6,780 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 0000000 | 000000 |
1/16" | 1 1/4" | 6,780 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 00000 |
1/16" | 1/2" | 6,780 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 0000000 | 00000 |
1/16" | 1/2" | 6,780 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 00000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass


These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
8" Dia. | |||||||||
0.04" | 1 1/4" | 7,625 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
Bench and Surface Grinder Cutoff Wheels for Hard Metal


Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel. While these wheels are not as hard as wheels made with diamond, they dissipate heat better.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | For Use On | Grit | Each | |
8" Dia. | ||||||||||
3/64" | 1 1/4" | 4,535 | Type 1 | Straight | Boron Nitride | Steel | Inconel, Hastelloy, Tool Steel | 100 | 0000000 | 0000000 |
Portable Circular Saw Cutoff Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
8" Dia. | |||||||||||
3/32" | 5/8" | Round/Diamond | 7,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Portable Circular Saw Cutoff Wheels for Stainless Steel


These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
8" Dia. | |||||||||
1/16" | 5/8" | 7,640 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | 60 | 0000000 | 000000 |
Portable Circular Saw Cutoff Wheels for Sheet Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
8" Dia. | |||||||||||
1/8" | 5/8" | Round/Diamond | 7,500 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
Portable Circular Saw Cutoff Wheels for Masonry and Concrete


Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
8" Dia. | ||||||||||
1/8" | 5/8" | Round/Diamond | 7,500 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 000000 | 00000 |
Circular Saw Blades for Composites and Graphite


A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Each | |
8" Dia. | |||||||||
5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 0000000 |
Fast-Cut Long-Life Circular Saw Blades for Masonry and Stone



The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
8" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 7,640 | Diamond | Steel | Dry, Wet | 0.394" | Segmented | Reducer Bushing | 0000000 | 000000 |
Smooth-Cut Long-Life Circular Saw Blades for Masonry and Stone



A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
8" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 7,640 | Diamond | Steel | Dry, Wet | 0.394" | Continuous | Reducer Bushing | 0000000 | 000000 |
Circular Saw Blades for Wood


Cut wood, plywood, and particleboard. These blades bite into wood to make both straight and plunge cuts, so they can be used to cut lumber down to size and slice through material that’s already installed. When choosing a blade, you’ll want to keep in mind the number of teeth and width of cut. Choose more teeth for cutting across the grain; choose fewer teeth for cutting with the grain (ripping) and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.
Blades with anti-vibration vents limit shaking for straight, accurate cuts. They also reduce cutting noise.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Features | Each | |
8" Dia. | |||||||||||
5/8" | Round | 40 | 0.126" | 9,000 | 10° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | Anti-Vibration Vents | 0000000 | 000000 |
Smooth-Cut Circular Saw Blades for Wood


With more than 1.5 times more teeth than a standard circular saw blade, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. Use them on wood, plywood, and particleboard. They make both straight and plunge cuts, so they can cut lumber down to size and slice through material that’s already installed.
Blades with anti-vibration vents limit shaking for straight, accurate cuts and also reduce cutting noise. They have a coating that resists heat buildup when cutting, which helps keep them sharp. They stay cool as you cut, so sawdust won’t stick to them as easily, and they won’t burn your wood.
Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Features | Each | |
8" Dia. | |||||||||||
5/8" | Round | 64 | 0.116" | 9,000 | 10° | Carbide | Steel | Across Grain | Anti-Vibration Vents | 000000000 | 000000 |
Groove-Cutting Circular Saw Blades for Wood



Also known as dado-head blades, these are for cutting grooves across the grain and with the grain (ripping) in all types of wood.
Material | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | For Use On | Includes | Each | |
8" Dia. | ||||||||||||
5/8" | Round | 22 | 0.25"-0.813" | 9,000 | 15° | Carbide | Carbide | Across Grain, With Grain (Rip Cut) | Wood | Two Cutting Blades, Removable Chip-Clearing Blades, Shims, Plastic Case | 0000000 | 0000000 |
Circular Saw Blades for Glass and Fiberglass



The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass. Blades with multiple arbor diameters come with a reducer bushing. Choose medium grit for less material loss and smoother cuts. Choose coarse grit for faster cuts. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Includes | Each | |
Medium Grit | ||||||||||
8" Dia. | ||||||||||
1/2", 5/8" | Round/Diamond | 0.099" | 5,700 | Carbide | Steel | Dry | Segmented | Reducer Bushing | 0000000 | 000000 |
Coarse Grit | ||||||||||
8" Dia. | ||||||||||
1/2", 5/8" | Round/Diamond | 0.123" | 5,700 | Carbide | Steel | Dry | Segmented | Reducer Bushing | 0000000 | 00000 |
Dry-Cutting Circular Saw Blades for Tile


A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
8" Dia. | ||||||||||
5/8" | Round | 0.06" | 7,640 | Diamond | Steel | Dry | 0.284" | Continuous | 0000000 | 000000 |
Wet-Cutting Circular Saw Blades for Tile


Use these blades with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass. They have a continuous edge coated in diamond grit.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
8" Dia. | ||||||||||
5/8" | Round | 0.06" | 7,000 | Diamond | Steel | Wet | 0.2" | Continuous | 0000000 | 000000 |
Circular Saw Blades for Rubber and Reinforced Hose


Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||
---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Tooth | Body | Each | |
8" Dia. | ||||||||
5/8" | Round | 106 | 0.093" | 4,000 | Steel | Steel | 000000 | 0000000 |
Circular Saw Blades for Steel


Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. They bite into steel to make both straight and plunge cuts, so they can slice through material that’s already installed. When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.
Blades with an aluminum-alloy-coated body resist heat buildup when cutting, so they stay sharp and don’t get gummed up with metal shards. Since they stay cool, they won’t accidentally harden the edge that you’re cutting.
Blades with anti-vibration vents limit shaking for straight, accurate cuts. They also reduce cutting noise.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Circular Saw Blades for Aluminum


Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Each | |
8" Dia. | |||||||||
5/8" | Round | 60 | 0.094" | 5,800 | 8° | Carbide-Tipped Steel | Steel | 0000000 | 000000 |
Circular Saw Blades for Stainless Steel


Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Circular Saw Blades for Steel and Stainless Steel


Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum-alloy coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.
Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.
Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Features | Each | |
8" Dia. | ||||||||||
5/8" | Round | 42 | 0.075" | 4,300 | 0° | Ceramic/Carbide Blend | Aluminum-Alloy-Coated Steel | Anti-Vibration Vents | 0000000 | 000000 |
Circular Saw Blades for Copper, Brass, and Bronze


Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. Choose blades with more teeth for a smoother cut.