Floor-Mount Cutoff Saw Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
20" Dia. | ||||||||||
| 3/16" | 1" | 3,065 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Long-Life Floor-Mount Cutoff Saw Wheels for Metal
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
20" Dia. | ||||||||||
| 5/32" | 1" | 2,710 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Floor-Mount Cutoff Saw Wheels for Ductile Cast Iron
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
20" Dia. | |||||||||
| 3/16" | 1" | 3,800 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 24 | 0000000 | 000000 |
Wet-Cutting Blades for Walk-Behind Flat Saws
Use these blades with water or coolant (not included) to produce a smooth cut and minimize heat buildup. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | For Use On | Each | |
20" Dia. | |||||||||
| 1" | Round | 0.14" | 3,055 | Diamond | Steel | 3/8" | Concrete | 000000 | 0000000 |
Long-Life Wet/Dry-Cutting Blades for Walk-Behind Flat Saws
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | Cutting Application | For Use On | Each | |
20" Dia. | ||||||||||
| 1" | Round | 0.14" | 3,055 | Diamond | Steel | 1/2" | Dry, Wet | Concrete, Masonry | 00000000 | 0000000 |