Bench Grinder Cutoff Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
1/16" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 000000 |
1/16" | 5/8" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 00000 |
3/32" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 00000 |
3/32" | 5/8" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 0000 |
7/64" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 00000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass


These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
10" Dia. | |||||||||
0.05" | 1 1/4" | 6,100 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
Bench and Surface Grinder Cutoff Wheels for Hard Metal


Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel. While these wheels are not as hard as wheels made with diamond, they dissipate heat better.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | For Use On | Grit | Each | |
10" Dia. | ||||||||||
3/64" | 1 1/4" | 3,625 | Type 1 | Straight | Boron Nitride | Steel | Inconel, Hastelloy, Tool Steel | 100 | 0000000 | 0000000 |
Bench-Top Cutoff Saw Wheels for Metal


Make burr-free cuts in hard or thick materials, such as metal pipes, bars, and sheets. Made with bonded abrasives, these wheels are designed to slice through metal more quickly than other saw blades. They’re not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
3/32" | 5/8" | 6,100 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 000000 |
3/32" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 00000 |
Floor-Mount Cutoff Saw Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
1/8" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Long-Life Floor-Mount Cutoff Saw Wheels for Metal


Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
3/32" | 5/8" | 6,110 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Cutoff Wheels for Metallurgical Testing


Create the nearly polished finish required for testing metal with these non-reinforced aluminum oxide wheels. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | For Hardness | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive Material | For Use On | Grit | Each | |
10" Dia. | ||||||||||
0.063" | Rockwell C30-C40 | 1 1/4" | 3,500 | Type 1 | Straight | Aluminum Oxide | Iron, Stainless Steel, Steel | 90 | 0000000 | 000000 |
0.063" | Rockwell C40-C55 | 1 1/4" | 3,500 | Type 1 | Straight | Aluminum Oxide | Iron, Stainless Steel, Steel | 100 | 0000000 | 00000 |
0.063" | Rockwell C55-C68 | 1 1/4" | 3,500 | Type 1 | Straight | Aluminum Oxide | Stainless Steel, Steel | 100 | 0000000 | 00000 |
Fast-Cut Miter and Chop Saw Blades for Masonry and Stone



The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.08" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Segmented | Reducer Bushing | 0000000 | 000000 |
Smooth-Cut Miter and Chop Saw Blades for Masonry and Stone



A continuous diamond-grit edge on these blades produces smooth cuts in hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. Remove the center piece to use the diamond-shaped arbor.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Continuous | Reducer Bushing | 0000000 | 000000 |
Fast-Cut Long-Life Miter and Chop Saw Blades for Masonry and Stone



The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 6,100 | Diamond | Steel | Dry, Wet | 0.394" | Segmented | Reducer Bushing | 0000000 | 000000 |
Smooth-Cut Long-Life Miter and Chop Saw Blades for Masonry and Stone



A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Continuous | Reducer Bushing | 0000000 | 0000000 |
Miter, Chop, and Table Saw Blades for Composites and Graphite


A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Each | |
10" Dia. | |||||||||
1" | Round | 0.125" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 0000000 |
Smooth-Cut Miter, Chop, and Table Saw Blades for Wood


With a large number of teeth, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. To keep your cuts straight and accurate, they have laser-cut anti-vibration vents that add stability. The vents also dissipate heat to prevent dulling. Use these blades on wood, plywood, and particleboard. They’re good for applications such as making long, accurate cuts on a sheet of plywood or cutting bevels and angles into wood framing to make a door or window.
When choosing a blade, you’ll want to keep in mind the number of teeth and width of cut. Choose more teeth for cutting across the grain; choose fewer teeth for cutting with the grain (ripping) or through thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.
Blades with an aluminum-alloy-coated body further reduce heat buildup when cutting. This protects your material from burning and keeps dust from sticking to your blade and gumming it up. The coating also prevents the blade from dulling.
Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Features | Each | |
10" Dia. | |||||||||||
5/8" | Round | 80 | 0.098" | 6,000 | 10° | Carbide | Steel | Across Grain | Anti-Vibration Vents | 00000000 | 000000 |
5/8" | Round | 80 | 0.116" | 7,000 | 10° | Titanium Cobalt Carbide-Tipped Steel | Aluminum-Alloy-Coated Steel | Across Grain | Anti-Vibration Vents | 0000000 | 000000 |
5/8" | Round | 80 | 0.126" | 7,000 | 5° | Titanium Cobalt Carbide-Tipped Steel | Aluminum-Alloy-Coated Steel | Across Grain | Anti-Vibration Vents | 000000000 | 000000 |
Groove-Cutting Miter, Chop, and Table Saw Blades for Wood



Also known as dado-head blades, these are for cutting grooves across the grain and with the grain (ripping) in all types of wood.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Includes | Each | |
10" Dia. | |||||||||||
1" | Round | 32 | 0.25"-0.906" | 7,000 | -12° | Carbide | Carbide | Across Grain, With Grain (Rip Cut) | Two Cutting Blades, Removable Chip-Clearing Blades, Shims, Plastic Case | 0000000 | 0000000 |
Miter, Chop, and Table Saw Blades for Wood


Cut wood, plywood, and particleboard. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping). Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
10" Dia. | ||||||||||
5/8" | Round | 24 | 0.098" | 6,000 | 15° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 00000000 | 000000 |
5/8" | Round | 40 | 0.094" | 6,000 | 20° | Carbide-Tipped Steel | Steel | Across Grain, With Grain (Rip Cut) | 00000000 | 00000 |
5/8" | Round | 40 | 0.094" | 7,000 | 15° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 00000 |
5/8" | Round | 60 | 0.098" | 6,000 | 15° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 00000000 | 00000 |
5/8" | Round | 80 | 0.098" | 6,000 | 15° | Carbide | Steel | Across Grain | 00000000 | 00000 |
Light-Use Miter, Chop, and Table Saw Blades for Wood


Use these blades for occasional cutting. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping).
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
10" Dia. | ||||||||||
5/8" | Round | 180 | 0.094" | 5,900 | 2° | Steel | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 000000 |
Miter, Chop, and Table Saw Blades for Glass and Fiberglass


The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass. Blades come with a reducer bushing to adjust the arbor diameter.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Includes | Each | |
Coarse Grit | ||||||||||
10" Dia. | ||||||||||
5/8", 3/4" | Round | 0.138" | 4,600 | Carbide | Steel | Dry | Segmented | Reducer Bushing | 0000000 | 0000000 |
Wet-Cutting Miter, Chop, and Table Saw Blades for Tile


Use with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass. They have a continuous edge coated in diamond grit.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
10" Dia. | ||||||||||
5/8" | Round | 0.06" | 5,300 | Diamond | Steel | Wet | 0.2" | Continuous | 0000000 | 000000 |
Dry-Cutting Miter, Chop, and Table Saw Blades for Tile


A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile. These blades have multiple arbor diameters and come with a reducer bushing.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round | 0.06" | 6,115 | Diamond | Steel | Dry | 0.284" | Continuous | Reducer Bushing | 00000000 | 000000 |
Miter and Chop Saw Blades for Rubber and Reinforced Hose


Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.
For technical drawings and 3-D models, click on a part number.
Miter, Chop, and Table Saw Blades for Plastic


Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on these blades. Sharpen them if they become dull. Choose blades with more teeth for thin, brittle plastic; choose blades with fewer teeth for thicker, softer plastic. Blades with a narrower width of cut make faster cuts with less material loss.
Miter and Chop Saw Blades for Steel


Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Includes | Each | |
10" Dia. | ||||||||||
5/8" | Round | 52 | 0.091" | 5,200 | 0° | Carbide-Tipped Steel | Steel | __ | 0000000 | 0000000 |
5/8", 1" | Round | 52 | 0.078" | 5,200 | 0° | Carbide-Tipped Steel | Steel | Reducer Bushing | 0000000 | 00000 |
1" | Round | 60 | 0.094" | 1,900 | 0° | Carbide-Tipped Steel | Steel | __ | 0000000 | 000000 |
Miter and Chop Saw Blades for Aluminum


Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. They’re good for applications such as cutting aluminum bars to size or cutting bevels and angles into aluminum framing to make a window.
When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. More teeth will give you a smoother cut; fewer teeth will give you a faster cut. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.
Warning: Use blades that have a greater rpm rating than the no-load rpm of your saw.
For technical drawings and 3-D models, click on a part number.
Miter and Chop Saw Blades for Stainless Steel


Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Each | |
10" Dia. | |||||||||
1" | Round | 66 | 0.078" | 3,000 | 10° | Carbide | Steel | 0000000 | 0000000 |
Miter and Chop Saw Blades for Steel and Stainless Steel


Spend less time on blade changes when cutting steel and stainless steel. These blades have teeth that are a blend of ceramic and carbide, so they cut both materials and last five times longer than blades with standard carbide teeth. An aluminum alloy coating on their body resists heat buildup to prevent them from dulling and getting gummed up with metal shards. Since they stay cool, they won’t accidentally harden the edge that you’re cutting. To keep your cuts straight and accurate, they have anti-vibration vents that limit shaking. The vents further reduce heat buildup to prevent dulling. Use these blades for applications such as cutting steel bars to size or cutting bevels and angles into stainless steel framing to make a window.
Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.
Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Features | Each | |
10" Dia. | ||||||||||
1" | Round | 50 | 0.083" | 3,000 | 0° | Ceramic/Carbide Blend | Aluminum-Alloy-Coated Steel | Anti-Vibration Vents | 0000000 | 000000 |
Miter and Chop Saw Blades for Copper, Brass, and Bronze


Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.
Multipurpose Miter and Chop Saw Blades



Cut through metal, plastic, and other materials without having to change blades. These blades have carbide-tipped teeth that make clean cuts through plastic while being durable enough to make burr-free cuts through metal.
When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.
Blades with an aluminum-alloy-coated body resist heat buildup when cutting, so they stay sharp and don’t get gummed up with dust and metal shards. Since they stay cool, they won’t accidentally burn or harden the edge that you’re cutting. These blades also have anti-vibration vents that limit shaking for straight, accurate cuts. They further reduce heat buildup to prevent dulling.
Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | For Use On | Features | Each | |
10" Dia. | |||||||||||
5/8" | Round | 60 | 0.11" | 6,000 | -5° | Carbide-Tipped Steel | Aluminum-Alloy-Coated Steel | Aluminum, Brass, Copper, Fiberglass, Plastic | Anti-Vibration Vents | 0000000 | 000000 |
5/8" | Round | 80 | 0.094" | 6,000 | -5° | Carbide-Tipped Steel | Aluminum-Alloy-Coated Steel | Aluminum, Brass, Copper, Fiberglass, Plastic | Anti-Vibration Vents | 0000000 | 00000 |
5/8" | Round | 100 | 0.091" | 6,000 | -5° | Carbide-Tipped Steel | Aluminum-Alloy-Coated Steel | Aluminum, Brass, Copper, Fiberglass, Plastic | Anti-Vibration Vents | 0000000 | 00000 |
1" | Round | 28 | 0.078" | 4,500 | 0° | Carbide-Tipped Steel | Steel | Aluminum, Brass, Copper, Plastic, Steel, Wood, Wood with Nails | __ | 0000000 | 00000 |
Cold Saw Blades for Steel and Cast Iron


Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Pinholes | Material | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | No. of | Dia. | Ctr.-to-Ctr. | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Hardness | Each | |
10" Dia. | |||||||||||||
32 mm | Round | 2 4 2 | 8.5 mm 9 mm 12 mm | 45 mm 50 mm 64 mm | 180 | 0.078" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 0000000 |
40 mm | Round | 2 4 | 9 mm 12 mm | 55 mm 64 mm | 180 | 0.078" | 65 | 15° | Steel | Steel | Rockwell C63-C65 | 0000000 | 000000 |
Cold Saw Blades for Stainless Steel


Use these titanium carbonitride (TiCN) coated blades on stainless steel bars, rods, pipe, and tubing. Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Pinholes | Material | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | No. of | Dia. | Ctr.-to-Ctr. | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Hardness | Each | |
10" Dia. | |||||||||||||
32 mm | Round | 2 4 2 | 8.5 mm 9 mm 12 mm | 45 mm 50 mm 64 mm | 180 | 0.078" | 65 | 15° | TiCN-Coated Steel | TiCN-Coated Steel | Rockwell C63-C65 | 0000000 | 0000000 |
40 mm | Round | 2 4 | 9 mm 12 mm | 55 mm 64 mm | 180 | 0.078" | 65 | 15° | TiCN-Coated Steel | TiCN-Coated Steel | Rockwell C63-C65 | 0000000 | 000000 |