Dremel-Compatible Blades for Ceramics
These blades have a continuous edge with diamond grit to cut through ceramics. Blades with a narrower width of cut make faster cuts with less material loss.
Arbor | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Size | Shank Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Edge Style | Each | |
| 1 3/16" | 1/16" | Round | 0.012" | 22,000 | Diamond | Steel | Continuous | 0000000 | 000000 |
Dremel-Compatible Blades for Plastic
The segmented edge on these blades is coated with diamond grit for cutting plastic. They’re often used for plunge cuts into the center of your material and small, precise jobs, such as trimming 3D-printed parts.
Style C have round slots so you can see your workpiece better during cuts. The slots also dissipate heat to prevent dulling.
Blades with a .007” width of cut are good for slow, smooth cuts.
Blades with a .011” width of cut are coated with coarser abrasives than blades with a .007" width of cut. Use them for fast, rough cutting.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | Dia. | Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Edge Style | Each | |
| B | 1 3/16" | 1/16" | Round | 0.007" | 25,000 | Diamond | Stainless Steel | Segmented | 0000000 | 000000 |
| B | 1 3/16" | 1/16" | Round | 0.011" | 25,000 | Diamond | Stainless Steel | Segmented | 0000000 | 00000 |
| C | 1 3/16" | 1/16" | Round | 0.007" | 22,000 | Diamond | Stainless Steel | Segmented | 00000000 | 00000 |
| C | 1 3/16" | 1/16" | Round | 0.011" | 22,000 | Diamond | Stainless Steel | Segmented | 00000000 | 00000 |