We will reply to your message within an hour.
This saw is less than half the weight with a smaller wheel diameter than standard bench-top cutoff saws.
A high-torque motor powers these saws through tough metal, such as angle iron and tool steel. These saws must be hardwired.
Make fast cuts through tough metal, such as angle iron and flat bar, with more than twice the horsepower of bench-top cutoff saws. These saws must be hardwired.
Operate this saw at a low rpm to make quick cuts in metal without excessive heat or the need for coolant.
Pins hold hose slightly bent, pulling it apart as the knife-edge blade slices a straight, smooth cut.
A higher air consumption rating allows this saw to work in longer bursts than the light duty air-powered portable cutoff saw. It has a durable composite handle.
This economy cutoff saw has a lightweight nylon handle and is for less prolonged use than the standard air-powered portable cutoff saw.
Use abrasive wheels with this saw to cut through hard materials.
The right-angle position of this saw's blade makes it suitable for both cutting and grinding with an abrasive wheel.
Make plunge cuts with the rotating cutting bit, or attach a cutoff wheel for straight cuts.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.
These wheels have a zirconia alumina abrasive for cutting ductile cast iron.
These non-reinforced aluminum oxide wheels create the nearly polished finish required for testing metal.
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper.
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels.
These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile cast iron.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Designed to cut sheet metal.
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
Make cuts in hard, brittle materials such as firebrick, stone, and concrete.
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron.
These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.
Use these wheels to cut through metal such as iron, stainless steel, and steel.
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.
These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal.
Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper.
The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel.
With less than 0.1% iron, chloride, and sulfur contaminants, these wheels prevent corrosion and discoloration on stainless steel.
For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels.
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.
Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel.
Made of premium grade abrasives, these wheels are strong and thick for making notches in stainless steel.
Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants.
Made with diamond, the strongest abrasive material, these wheels are extremely hard and wear resistant, so they stand up to ceramics and glass.
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal.
Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.
Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel.
Made of ceramic alumina, these wheels last 10 times longer than standard cutoff wheels when cutting hard metal, such as tool steel. These wheels, also known as Type 27, raised hub, and depressed-center cutoff wheels, outperform Type 1 wheels when making flush cuts.
Made of premium grade abrasives, these wheels are strong and thick for making notches in aluminum, iron, stainless steel, and steel.
Often used on duct, these ultra-thin wheels make fast, clean cuts in thin metal that minimize burrs and discoloration from heat.
With an X-shaped arbor hole, these wheels quickly and safely click into X-lock grinders without wrenches or flange nuts.
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel.
An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.
Make cuts in most metal, including aluminum, iron, stainless steel, and steel.
Use these wheels for cutting soft metal, plastic, stone, and wood.
Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.
A ceramic alumina abrasive cuts through stainless steel.
Swap accessories quickly and safely without tools.
Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your rotary tool.
The quick-change arbors in these kits allow you to easily swap accessories.