We will reply to your message within an hour.
More
The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.
The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.
When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.
A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.
These sponges conform exceptionally well to small, contoured surfaces.
Evenly sand two surfaces at once.
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block.
These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.
The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.
When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.
Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners.
These assortments include a selection of sanding sponges with long-lasting diamond abrasive on one side. Flexible enough to sand around curves and in corners, they provide the comfort and control of a sanding block.
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.
The nylon mesh on these discs is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.
Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.
Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.
These discs are abrasive-embedded cloth with a cushioned layer.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Holes in the disc let you see the surface you’re sanding.
Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide that aggressively removes material from steel and wood.
Nylon mesh is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.
Used for stripping, these discs eliminate discoloration from heat buildup.
Prepare material surfaces for finishing processes such as coating, painting, and soldering—these discs contain an extra coarse ceramic alumina abrasive for heavy cleaning and stripping of stainless steel, nickel, and other hard metals.
Remove rust and corrosion from surfaces that have protruding studs, such as brake hubs and flanges, without damaging the stud's threads.
Remove paint, primer, and other contaminants from electrical grounding contact points to ensure clean connections.
Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.
Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide or ceramic alumina.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
Attach a nylon mesh sanding pad to these blocks for improved comfort and control.
Blocks hold an adhesive-back sanding roll—cut off worn abrasive and pull out more as needed.
Keep a variety of sanding blocks on hand to smooth workpieces of all shapes and sizes.
Made of foam, these blocks flex to sand around curves.
The rubber backing cushions the abrasive to prevent gouging your aluminum, soft metal, and nonmetal work surfaces.
The backing cushions the abrasive to prevent gouging your work surface.
Finish and polish metals without producing dust.
Remove material buildup from the abrasive surface of a moving belt or roll, extending the service life.
Made of nylon mesh, these belts compensate for uneven sanding pressure to create a smooth, consistent finish on workpieces.
When you need to achieve a more consistent finish, choose nylon mesh sanding belts over paper- or cloth-backed belts.
Create finer and more consistent finishes—these belts have a cushioned layer that creates more even sanding pressure on your workpiece.
Also known as cross- and square-sanding pad shank adapters, these arbors are required to attach sanding pads for internal and irregular surfaces to hand-held drills and die grinders.
Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.
Add one of these foam pads between your sanding disc and backup pad to create a cushioned layer while sanding. They conform to bumps or crevices and distribute pressure more evenly on your workpiece as you sand, leading to finer and more consistent finishes.
Holes in the pad align with holes in the sanding disc for a clearer view of the sanding surface.
Secure the shank into the collet or chuck of your tool and attach the quick-change fastener on the back of compatible sanding discs to the pad.
Holes allow dust removal when used with a vacuum sander.