McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    223 Products

    Sealing Washers

    Prevent leaks while distributing weight evenly under nuts and screws. These washers compress as you tighten to keep air and fluid in, and dust and contaminants out. Use them anywhere you need a tight seal, such as protecting electronics from moisture or keeping lubricants contained in machinery.
    Metal
    Image of Product. Front orientation. Sealing Washers. Metal.
    Also known as crush washers, these are made of soft metal that deforms under pressure to fill gaps around the nut or screw. Often found in oil drain valves, they withstand stress and wear better than plastic and rubber washers, but aren't as leak-resistant. Metal sealing washers are not reusable.
    Copper—Softer than aluminum washers, these deform easily to create a tight seal with less effort. They resist rusting in corrosive environments, but will develop a green patina over time.
    Cellulose-Filled Copper—The easiest washers to crush. These washers are embedded with cellulose, which makes them more flexible than other metal washers for a tighter seal. They resist rusting in corrosive environments, but will develop a green patina over time.
    Aluminum—These washers are an economical alternative to copper. They have similar corrosion resistance but require more effort to crush.
    For Screw
    Size
    ID
    OD
    Thk.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Copper
    No. 2
    0.094"0.218"0.018" to 0.025"25000000000000000
    No. 4
    0.125"0.281"0.024" to 0.038"2500000000000000
    No. 5
    0.141"0.281"0.024" to 0.038"2500000000000000
    No. 6
    0.156"0.281"0.024" to 0.038"2500000000000000
    No. 8
    0.174"0.312"0.024" to 0.038"2500000000000000
    No. 10
    0.203"0.375"0.024" to 0.038"2500000000000000
    No. 12
    0.234"0.390"0.033" to 0.047"2500000000000000
    1/4"
    0.260"0.500"0.043" to 0.057"1000000000000000
    5/16"
    0.344"0.625"0.043" to 0.057"1000000000000000
    3/8"
    0.406"0.656"0.055" to 0.069"1000000000000000
    7/16"
    0.500"0.750"0.055" to 0.069"1000000000000000
    1/2"
    0.531"0.812"0.055" to 0.069"1000000000000000
    5/8"
    0.688"0.938"0.071" to 0.086"500000000000000
    3/4"
    0.812"1.062"0.071" to 0.086"500000000000000
    7/8"
    0.938"1.187"0.086" to 0.104"10000000000000
    1"
    1.062"1.375"0.086" to 0.104"100000000000000
    1 1/4"
    1.312"1.625"0.112" to 0.13"100000000000000
    M2
    2.200 mm5.600 mm0.6 mm to 0.9 mm2500000000000000
    M2.5
    2.700 mm6.000 mm0.6 mm to 0.9 mm2500000000000000
    M3
    3.200 mm6.400 mm0.6 mm to 0.9 mm2500000000000000
    M4
    4.300 mm8.000 mm0.8 mm to 1.2 mm2500000000000000
    M5
    5.200 mm10.400 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M6
    6.200 mm9.900 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M6
    6.200 mm11.900 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M6
    6.200 mm12.400 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M8
    8.200 mm11.900 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M8
    8.200 mm12.400 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M8
    8.200 mm13.900 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M10
    10.200 mm13.900 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M10
    10.200 mm13.900 mm1.3 mm to 1.7 mmDIN 7603100000000000000
    M10
    10.200 mm15.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M12
    12.200 mm15.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M12
    12.200 mm16.200 mm0.8 mm to 1.2 mmDIN 76032500000000000000
    M12
    12.200 mm17.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M1313.200 mm17.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M14
    14.200 mm17.900 mm0.8 mm to 1.2 mmDIN 76031000000000000000
    M14
    14.200 mm17.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M14
    14.200 mm19.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M16
    16.200 mm19.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M16
    16.200 mm21.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M16
    16.200 mm21.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M17
    17.200 mm21.900 mm1.3 mm to 1.7 mmDIN 7603100000000000000
    M18
    18.200 mm21.900 mm1.3 mm to 1.7 mmDIN 760350000000000000
    M18
    18.200 mm23.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M20
    20.200 mm23.900 mm1.3 mm to 1.7 mmDIN 760350000000000000
    M20
    20.200 mm25.900 mm1.3 mm to 1.7 mmDIN 7603500000000000000
    M2121.200 mm25.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M22
    22.200 mm26.900 mm1.3 mm to 1.7 mmDIN 7603500000000000000
    M22
    22.200 mm28.900 mm1.3 mm to 1.7 mmDIN 7603500000000000000
    M24
    24.300 mm29.900 mm1.8 mm to 2.2 mmDIN 7603500000000000000
    M25
    28.000 mm36.500 mm2.8 mm to 3.2 mm100000000000000
    M26
    26.300 mm31.900 mm1.8 mm to 2.2 mmDIN 7603500000000000000
    M27
    27.300 mm31.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M27
    30.000 mm38.000 mm2.8 mm to 3.2 mm100000000000000
    M28
    28.300 mm35.900 mm1.3 mm to 1.7 mmDIN 7603500000000000000
    M30
    30.300 mm35.900 mm1.8 mm to 2.2 mmDIN 7603500000000000000
    M32
    32.300 mm37.900 mm1.8 mm to 2.2 mmDIN 7603500000000000000
    M33
    33.300 mm38.900 mm1.8 mm to 2.2 mmDIN 7603500000000000000
    M36
    36.300 mm41.900 mm1.8 mm to 2.2 mmDIN 7603500000000000000
    M36
    36.300 mm43.900 mm1.8 mm to 2.2 mmDIN 7603100000000000000
    M38
    38.300 mm43.900 mm1.8 mm to 2.2 mmDIN 7603100000000000000
    M42
    42.300 mm48.900 mm1.8 mm to 2.2 mmDIN 7603100000000000000
    M48
    48.300 mm54.900 mm1.8 mm to 2.2 mmDIN 7603100000000000000
     
    Cellulose-Filled Copper
    M6
    6.200 mm9.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M8
    8.200 mm11.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M8
    8.200 mm13.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M10
    10.200 mm13.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M10
    10.200 mm15.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M12
    12.200 mm15.900 mm1.8 mm to 2.2 mmDIN 76032500000000000000
    M12
    12.200 mm17.900 mm1.8 mm to 2.2 mmDIN 76032500000000000000
    M14
    14.200 mm17.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M14
    14.200 mm19.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M16
    16.200 mm19.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M18
    18.200 mm23.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M20
    20.200 mm23.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M20
    20.200 mm25.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M22
    22.200 mm26.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M24
    24.300 mm31.900 mm2.3 mm to 2.7 mmDIN 76031000000000000000
    M26
    26.300 mm30.900 mm2.3 mm to 2.7 mmDIN 76031000000000000000
    M26
    26.300 mm31.900 mm2.3 mm to 2.7 mmDIN 76031000000000000000
    M26
    26.300 mm33.900 mm2.3 mm to 2.7 mmDIN 76031000000000000000
    M28
    28.300 mm33.900 mm2.3 mm to 2.7 mmDIN 7603500000000000000
    M30
    30.300 mm35.900 mm2.3 mm to 2.7 mmDIN 7603500000000000000
    M32
    32.300 mm37.900 mm2.3 mm to 2.7 mmDIN 7603500000000000000
    M36
    36.300 mm41.900 mm2.3 mm to 2.7 mmDIN 7603500000000000000
    M38
    38.300 mm43.900 mm2.3 mm to 2.7 mmDIN 7603500000000000000
    M42
    42.300 mm48.900 mm2.3 mm to 2.7 mmDIN 7603100000000000000
    M48
    48.300 mm54.900 mm2.3 mm to 2.7 mmDIN 7603100000000000000
    M50
    50.200 mm56.900 mm2.3 mm to 2.7 mmDIN 7603100000000000000
     
    Aluminum
    No. 4
    0.125"0.281"0.024" to 0.038"10000000000000000
    No. 6
    0.156"0.281"0.024" to 0.038"10000000000000000
    No. 8
    0.174"0.312"0.024" to 0.038"10000000000000000
    No. 10
    0.203"0.375"0.024" to 0.038"10000000000000000
    1/4"
    0.260"0.500"0.043" to 0.057"10000000000000000
    5/16"
    0.344"0.625"0.043" to 0.057"10000000000000000
    3/8"
    0.406"0.656"0.055" to 0.069"5000000000000000
    1/2"
    0.531"0.812"0.055" to 0.069"5000000000000000
    5/8"
    0.688"0.938"0.071" to 0.086"5000000000000000
    3/4"
    0.812"1.062"0.071" to 0.086"2500000000000000
    1"
    1.062"1.375"0.086" to 0.104"1000000000000000
    M3
    3.200 mm6.400 mm0.6 mm to 0.9 mm10000000000000000
    M4
    4.300 mm8.000 mm0.8 mm to 1.2 mm10000000000000000
    M5
    5.200 mm9.000 mm0.8 mm to 1.2 mm10000000000000000
    M6
    6.200 mm9.900 mm0.8 mm to 1.2 mmDIN 76035000000000000000
    M6
    6.200 mm11.900 mm0.8 mm to 1.2 mmDIN 76035000000000000000
    M8
    8.200 mm11.900 mm0.8 mm to 1.2 mmDIN 76035000000000000000
    M8
    8.200 mm13.900 mm0.8 mm to 1.2 mmDIN 7603100000000000000
    M10
    10.200 mm13.900 mm0.8 mm to 1.2 mmDIN 76035000000000000000
    M10
    10.200 mm13.900 mm1.3 mm to 1.7 mmDIN 7603100000000000000
    M10
    10.200 mm15.900 mm0.8 mm to 1.2 mmDIN 76035000000000000000
    M10
    10.200 mm15.900 mm1.3 mm to 1.7 mmDIN 7603100000000000000
    M12
    12.200 mm15.900 mm1.3 mm to 1.7 mmDIN 76035000000000000000
    M12
    12.200 mm17.900 mm1.3 mm to 1.7 mmDIN 76035000000000000000
    M14
    14.200 mm17.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M14
    14.200 mm19.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M16
    16.200 mm19.900 mm1.3 mm to 1.7 mmDIN 76032500000000000000
    M16
    16.200 mm21.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M18
    18.200 mm21.900 mm1.3 mm to 1.7 mmDIN 760350000000000000
    M18
    18.200 mm23.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M20
    20.200 mm23.900 mm1.3 mm to 1.7 mmDIN 760350000000000000
    M20
    20.200 mm25.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M22
    22.200 mm26.900 mm1.3 mm to 1.7 mmDIN 76031000000000000000
    M24
    24.300 mm29.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M24
    24.300 mm31.900 mm1.8 mm to 2.2 mmDIN 760350000000000000
    M26
    26.300 mm31.900 mm1.8 mm to 2.2 mmDIN 76031000000000000000
    M27
    30.000 mm38.000 mm2.8 mm to 3.2 mm1000000000000000
    M30
    33.000 mm42.000 mm2.8 mm to 3.2 mm500000000000000
    M36
    39.000 mm47.500 mm2.8 mm to 3.2 mm500000000000000
    M42
    45.000 mm53.000 mm2.8 mm to 3.2 mm500000000000000
     
    Hard Fiber
    Image of Product. Front orientation. Sealing Washers. Hard Fiber.
    An economical alternative to metal crush washers, these compress easily to create a seal with less effort. However, fiber washers degrade faster than metal washers and aren't as heat resistant. They also don't seal quite as tightly as their plastic or rubber counterparts. These washers are reusable, as long as the material isn't damaged.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Hard Fiber
    M5
    580.8DIN 760310000000000000000
    M5
    5100.8DIN 76031000000000000000
    M6
    690.8DIN 76031000000000000000
    M6
    6100.8DIN 76031000000000000000
    M8
    8120.8DIN 76031000000000000000
    M8
    8140.8DIN 76031000000000000000
    M10
    10140.8DIN 76031000000000000000
    M10
    10161DIN 76031000000000000000
    M12
    12160.8DIN 76031000000000000000
    M12
    12181DIN 76031000000000000000
    M12
    12200.8DIN 76031000000000000000
    M12
    12240.8DIN 76031000000000000000
    M14
    14181DIN 76031000000000000000
    M14
    14240.8DIN 76031000000000000000
    M16
    16210.8DIN 76031000000000000000
    M18
    18220.8DIN 76031000000000000000
    M18
    18240.8DIN 76031000000000000000
    M22
    22270.8DIN 76031000000000000000
     

    Sealing Washer Assortments

    Image of Product. Front orientation. Sealing Washers. Sealing Washer Assortments.
    Keep a collection of metal sealing washers on hand to prevent leaks while distributing weight evenly under nuts and screws. Also known as crush washers, these deform when tightened to lock air and fluid in, while keeping dust and contaminants out. They are not reusable.
    Labels in the lid include our part numbers, so it's easy to replenish the assortments.
    Copper—Softer than aluminum washers, these deform easily to create a tight seal with less effort. They resist rusting in corrosive environments, but will develop a green patina over time.
    Aluminum—These washers are an economical alternative to copper. They have similar corrosion resistance but require more effort to crush.
    No. of
    Pieces
    Sizes Included
    Specs.
    Met
    Container
    Type
    Each
    Copper
    555For M5 to M42 Screw SizesDIN 7603Plastic Box0000000000000000
     
    Aluminum
    570For M6 to M30 Screw SizesDIN 7603Plastic Box000000000000000
     

    Shims

    Image of Product. Front orientation. Shims. Round, Sold Individually.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Aluminum—These shims are an alternative to stainless steel for rust resistance but aren't as hard so they may not retain their shape as well. One-third the weight of steel, they’re commonly used in robotics and automation.
    Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.
    Thk.
    Thk. Tolerance
    ID
    Tolerance
    OD Tolerance
    Min.
    Hardness
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Aluminum
     
    1/4" ID × 3/8" OD
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.016"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.032"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.063"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
     
    3/8" ID × 5/8" OD
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.016"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.032"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.063"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.125"-0.007" to 0.007"0" to 0.011"-0.002" to 0.002"Not Rated50000000000000
     
    1/2" ID × 3/4" OD
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.016"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.032"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Not Rated100000000000000
    0.063"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.125"-0.007" to 0.007"0" to 0.011"-0.002" to 0.002"Not Rated500000000000000
     
    5/8" ID × 1" OD
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.016"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.032"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.063"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.125"-0.007" to 0.007"0" to 0.011"-0.002" to 0.002"Not Rated500000000000000
     
    3/4" ID × 1 1/8" OD
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Not Rated50000000000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.016"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.032"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.063"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.125"-0.007" to 0.007"0" to 0.011"-0.002" to 0.002"Not Rated500000000000000
     
    1" ID × 1 1/2" OD
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Not Rated500000000000000
    0.016"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.032"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
    0.063"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Not Rated1000000000000000
     
    Brass
     
    1/4" ID × 3/8" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
     
    3/8" ID × 5/8" OD
    0.002"-0.0006" to 0.0006"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.016"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.025"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    1/2" ID × 3/4" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.016"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.025"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    5/8" ID × 1" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.016"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.025"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    3/4" ID × 1 1/8" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.016"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B36100000000000000
    0.025"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    7/8" ID × 1 3/8" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    1" ID × 1 1/2" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.016"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B3650000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.025"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    1 1/4" ID × 1 3/4" OD
    0.005"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.01"-0.0013" to 0.0013"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
    0.02"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B60ASTM B361000000000000000
     
    back to top