Make different edge styles on your sheet metal. It comes with rollers for turning, wiring, burring, beading, and crimping.

Open sheet metal seams without cutting. The jaws slide under seams to pry the sheets apart. Because you’ve unfolded the sheet metal instead of cutting it, you can reuse both panels.

Also known as crimpers, these sealers secure seals (sold separately) onto metal strapping.

Sealers for open seals cut two notches on each side of the seal with one operation. Sealers for closed seals cut a single notch on each side of the seal with one operation. For best results, apply two notches per seal.

Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.

Use these tensioners to draw metal strapping tight around packages. These tensioners hold the bottom strap while either a feedwheel or gripper bites into the strap and tightens it.

Tensioners for open seals are for use on flat surfaces. Strapping is wrapped around the package and overlapped on top. Tensioners for closed seals are for use on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping.

Style A, B, and C tensioners have a lever handle that you squeeze to tighten the tension. They have unlimited ratcheting take-up, so they can be continually tensioned until tight. Style D tensioners have a wing handle that you spin to tighten the tension. They have limited ratcheting take-up, so they can only be tensioned to a certain point before they need to be reset. When the gripper moves all the way back to the handle, you’ll know they need to be reset.

Note: To match with compatible metal strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.

These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping. They work on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping, creating high tension without slip. Pull strapping tight manually before applying tension.

Style A tensioners have a wing handle that you spin to tighten the tension. Style B, C, and D tensioners have a lever handle that you squeeze to tighten the tension.

Tensioners with limited ratcheting take-up can only be tensioned to a certain point before they need to be reset. Tensioners with unlimited ratcheting take-up can be continually tensioned until tight.

Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.

These tools do double duty, pulling metal strapping tight and then fastening it, without the use of a separate seal. They create a joint by crimping interlocking notches into the strapping and cutting off the excess.

Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.

These tools do double duty, pulling plastic strapping tight and then fastening it with a seal (sold separately). They have multiple levers for tensioning and sealing.

Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.

These tensioners apply extreme tension on plastic strapping to hold it tight around packages. They hold the bottom strap and tension the top strap by winding it around a take-up wheel. They have a built-in cutter for removing excess strapping.

Tensioners with a soft gripping foot won’t fray strapping as you tighten, so they’re often used on soft, woven strapping. The smooth teeth on the foot aren’t as sharp as the inclined teeth on a standard gripping foot, but they still have a strong hold.

Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.