Install these cranes with anchor bolts (sold separately) set in a reinforced-concrete foundation. They rotate 360° to maximize floor space. Also known as jib cranes, they consist of a mast, head assembly, and flat beam that accommodates most trolleys. Use the included base plate pattern as a template to properly set anchor bolts into the foundation.

Anchor bolts include leveling nuts and securing nuts with washers to hold the mast's base plate.

Rotation stops prevent cranes from turning past a certain point to protect surrounding structures. To install, weld the stop bar to the crane’s mast assembly and the stop angle to the head assembly. Since rotation stops are welded, they’ll permanently limit a crane’s rotation.

Also Available: Other spans (from 10 ft. up to 20 ft.), capacities (up to 10,000 lbs.), and clearances (up to 20 ft.). Select 3244T999 and choose specifications.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Adjust the vertical clearance and horizontal span to suit your needs. Cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Aluminum cranes are lightweight.

Yellow painted steel cranes are not designed for prolonged use outdoors.

Cranes with steel wheels have legs that pivot for maneuverability in tight places.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

These cranes can be quickly broken down into three pieces for convenient transport and storage. The vertical clearance is adjustable. Cranes include a trolley that slides along the beam and has a mounting hole for your lifting device.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

These cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Able to cover a larger work area than rotating cranes, these allow you to position your load anywhere inside the four posts. They do not require installation in a foundation—you can install them on a reinforced concrete floor. Cranes have two fixed beams, a moving beam that travels along the fixed beams, a trolley, a cable travel system, and four posts. Enclosed-track beams keep the moving beam and trolley running smoothly by preventing debris from collecting on the track. The trolley has a mounting bar for your lifting device. The cable travel system includes cable trolleys to carry your lifting device's power cable. Use steel Stud Anchors for Concrete (sold separately) to mount cranes to a minimum 6" deep reinforced concrete floor.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Also known as end trucks, use these trolleys with your own beams to create a crane. For example, use two trolleys to allow a beam to move along two structural beams. Bumpers on the trolley body protect the wheels.

Top/bottom-mount trolleys allow you to run your moving beam along either the top or bottom of your fixed beams.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

A built-in trolley provides stability as these hoists travel along your beam. They can be mounted on fixed beams as well as on cranes with beams. Pull the hand chain to lift and position your load, and the brake will securely hold it in place.

Warning: Never use to lift people or items over people.

CM chain hoists have a body that spins 360°, so you can operate them from any direction.