With the touch of a button, these trolleys effortlessly move hook-mount hoists along your beam. The included spacing washers can be added or removed to fit a range of beam widths.

Two-speed trolleys have a slow speed option for more precise positioning than single-speed trolleys. To keep loads from swinging, these trolleys have a variable frequency drive (VFD) to speed up and slow down gradually. These smooth transitions also reduce strain on the motor and brakes, extending the life of the trolley. The guide rollers on each side prevent wobbling to minimize wear and tear on the trolley wheels and your beam.

Warning: Never use to lift people or items over people.

A separate hand chain makes these trolleys easy to move. Use with hook-mount hoists. The included spacing washers can be added and removed to fit a range of beam widths. Wheel bumpers protect wheels from collisions with other equipment on your beam.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

These trolleys have a rugged construction for long life. A separate hand chain makes them easy to move. Use with hook-mount hoists. The included spacing washers can be added and removed to fit a range of beam widths.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

To save you time, these trolleys adjust to fit over your beam without any disassembly. Use them to move hook-mount hoists. Anti-drop plates prevent these trolleys from falling off your beam if the wheels become derailed. If there’s a collision with other equipment, these trolleys have bumpers to protect the wheels from damage.

Trolleys with screw adjustment have a handle or a knob you turn to compress the two sides against your beam.

Trolleys with a locking pin are the fastest to install. Pull out the locking pin to open the trolley like a clamshell, then close the trolley around your beam. Push the pin back in to lock the trolley into place.

Trolleys with a glow-in-the-dark ruler keep width measurements visible in dark conditions.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these trolleys won’t corrode as they move hoists in areas that are frequently washed down with cleaning chemicals. They’re often found in commercial kitchens, because the wheels are coated in a lubricant that’s NSF registered H1 for incidental contact with food.

A mounting bar and eye give you flexibility when mounting your hoist. Remove the eye and mount directly to the bar when you need those extra couple inches of space. These trolleys fit a range of beam widths thanks to spacing washers that you can add or remove. Anti-drop plates prevent these trolleys from falling off your beam if the wheels become derailed.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Move hoists in areas with flammable gases and vapors—these trolleys have a coating and copper-plated wheels to minimize sparks. They meet IEC standards for use in hazardous locations such as refineries, chemical processing plants, and other sites where sparks could cause explosions. A mounting bar and eye give you flexibility when mounting your hoist. Remove the eye and mount directly to the bar when you need those extra couple inches of space. Fit trolleys to a wide range of beam widths by adding or removing spacing washers. An anti-drop plate keeps trolleys from falling off the beam.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Minimize your downtime—original manufacturer parts keep your hoist in operation.