The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting. These lights cannot be sold to Canada due to local regulations on mercury content.

This light has two UV bulbs and two fluorescent bulbs that work independently of each other. The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting. This light cannot be sold to Canada due to local regulations on mercurcy content.

This versatile light can be secured in the stand or removed for hand-held use. A switch lets you select between UV and white fluorescent light. These lights cannot be sold to Canada due to local regulations on mercury content.

Reveal imperfections both at and slightly below the surface of your metal part, unlike other flaw detection methods. Use these particles with a magnetic yoke to check for faulty seams, welding defects, and fatigue cracks to make sure metal parts will be safe under high stress. The yoke creates a magnetic field that draws the particles towards flaws, making them easy to spot. To prevent issues with other inspections down the line, make sure to fully demagnetize your part to remove all the particles.

Powder particles withstand higher temperatures than spray particles and are quick to use. They don’t need to dry, which means you can start testing immediately. Shake them out from a bottle or use a powder blower to apply them to your part. You can blow excess particles off even if your part is still magnetized. They come in different colors, so choose what will contrast best with your metal surface.

When testing round or hard-to-reach material, it’s easier to apply an even layer of spray particles than powder. They’re smaller than powder particles, so they’re good for detecting finer surface flaws and imperfections. Particles with a 360° sprayer won’t sputter or spatter even when the aerosol can is upside down, so you can coat parts evenly without straining your wrist. Water-based spray particles are easier to clean up than oil-based spray particles. Black spray particles are often used with white contrast paint to make flaws more visible.

Ultraviolet spray particles require a UV light, but stand out more than natural light particles, so you spend less time examining each part. For the best contrast, use these particles in dim lighting.

Find faulty seams, welding defects, and other surface-level flaws in ferrous materials. These kits come with everything you need to start inspecting parts. Apply the powder to the surface you want to inspect. Then plug in the yoke and it creates a magnetic field that draws the powder to the imperfection, making it easy to spot. Built for rugged environments, the yoke has a sealed design that stands up to chemicals and other harsh conditions. It’s also half the weight of a standard yoke and fits comfortably in your hand, so there’s less fatigue if you use it for extended periods of time.

Check for defects slightly beneath the surface of ferrous materials that you wouldn’t otherwise see. The yoke in these kits is powered by a battery, so it uses direct current to create a strong magnetic field that reaches just below the surface of your part. When you apply the powder, the powder will move towards any flaws, helping you identify tears, cracks, and other imperfections.

Ideal for fieldwork, these kits come with everything you need for on-the-go inspections. The yoke lasts up to eight hours on a single battery charge. Built for rugged environments, it has a sealed design that stands up to chemicals and other harsh conditions.

Find welding defects and other flaws in magnetic materials. These yokes create a magnetic field that draws magnetic powder (not included) to imperfections, making them easy to spot. All operate on AC power, which creates a small magnetic field ideal for detecting flaws along the surface of materials. Powered by standard electrical outlets, these yokes have a reliable and consistent power source.

6-lb. yokes are lightweight and fit comfortably in your hand to reduce fatigue over extended use. Attach an LED light to your yoke to brightly illuminate inspection areas. They’re powered by the yoke’s magnetic field, so they don’t require batteries.

Yokes with an AC/DC switch can also operate on DC power. DC power generates a deeper magnetic field than AC power to find defects underneath surfaces, such as internal tears and cracks.

Calibrate your yoke before each use with a test weight to ensure accurate test results.

Use colored dye to reveal cracks and surface flaws in most nonporous material. Flaws become visible under natural light and appear as a bright red color. Commonly used for weld inspecting.

More sensitive than natural light kits, these kits use UV light with colored dye to detect cracks, seams, and pores on machined surfaces.

Create a high-contrast background for magnetic particles to make flaws easier to spot during inspections. This opaque white paint reduces glare, so you can see where particles are clustered around imperfections. No need for brushes—it comes in an aerosol can that’s easy to use during field testing and spot inspections. Even when the can is upside down, the 360° sprayer won’t sputter or spatter, so you can coat parts evenly without straining your wrist. To speed up inspections, this paint dries quickly, leaving a clean coat that won’t bubble or flake. It works with both wet and dry magnetic particles.

Disinfect and sterilize air, water, and surfaces with short wave ultraviolet radiation. Ultraviolet radiation is harmful to skin and eyes; only install bulbs in fixtures that provide adequate protection. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to Canada due to import regulations.

Wire terminals allow you to connect these bulbs to a power source through a panel. These bulbs are sized to fit into tight spaces such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Ultraviolet LED bulbs are often used to sterilize surfaces, cure adhesives, and detect leaks. Ultraviolet light is invisible to the human eye.

For technical drawings and 3-D models, click on a part number.

Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Cover large areas with this long lamp. Use for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulations on mercury content.

Set the lamp on a bench top and the 360° rotating head directs light where you need it. It cannot be sold to Canada due to local regulatory limits on mercury content.

An optional lens filter (sold separately) lets you see extra-fine particles by reducing glare and the output of visible light.