Use these corrosion-resistant fittings in a low-pressure pipe line.

Also known as Code 61 SAE hydraulic flanges, these let you create an access point in a high-pressure hydraulic line.

Use these fittings for low-pressure applications in noncorrosive environments.

Also known as Code 61 SAE hydraulic flanges.

These brass fittings have the strength to handle high-pressure applications.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Install and remove these high-pressure brass fittings with a socket wrench or hex key (sold separately).

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

The flared end of the fitting nests inside the fitting body, providing extra support to the tubing. Fittings are also known as inverted 45° flared fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

Made of brass, these fittings have good corrosion resistance.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Safe for use in your air brake line, these fittings meet Department of Transportation FMVSS 571 standards. They’ve been tested for thermal cycling, vibration, and burst pressure, so put them to work right away.

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Fittings can withstand temperatures up to 200° F.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Larger, heavier, and rated for pressures up to 10,000 psi, these couplings maximize flow in high-pressure washing applications, such as water blasting.

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO A-shape plugs and sockets.

Made of brass with a steel wing nut, these couplings are tough enough to handle occasional drops to concrete and frequent connections on dump truck, oil rigs, and other heavy duty equipment. Compared to push-to-connect couplings, these are threaded, so they're easier to connect when there's pressure in your line.

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.

Crimp these fittings onto hydraulic hose for a permanent, leak-tight connection. Since they crimp on, they handle higher pressure than screw-on fittings.

Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.

Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Use these couplings when you need frequent access to a gas line. A complete coupling consists of a plug and a socket that connect and disconnect quickly.

Connect male- and female-threaded parts of different thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.