DIN-Panel-Mount Electrically Actuated Counters
For quick installation, these counters fit standard DIN panel cutouts. Wire them up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment.
Press-on counters have a front panel that is rated NEMA 4 and IP66 for protection against dust and washdowns and outdoor use. The screw terminals are rated IP20.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resettable | Counting Direction | No. of Digits | Max. Counts per Minute | DIN Size | Ht. | Wd. | Overall Dp. | Input Voltage | Features | Environmental Rating | Each | |
Press On | ||||||||||||
Screw Terminals | ||||||||||||
| Yes | Up | 8 | 1,200 | 1/32 | 0.87" | 1.77" | 2" | 24-240V AC/24-240V DC (High Level) 0-2V AC/0-2V DC (Low Level) | Battery-Powered Display | NEMA 4, IP20, IP66 | 0000000 | 0000000 |
| Yes | Up | 8 | 60,000 | 1/32 | 0.87" | 1.77" | 2" | 4.5-30V DC (High Level) 0-2V DC (Low Level) | Battery-Powered Display | NEMA 4, IP20, IP66 | 0000000 | 000000 |
DIN-Panel-Mount Electrically Actuated Counters with Output Relay
For quick installation, this counter fits standard DIN panel cutouts. Wire it up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. A gasket provides protection from direct water sprays (meets IP65). UL Recognized Component, C-UL Recognized Component, and CE marked, this counter meets American, Canadian, and European safety standards.
For Panel Cutout | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resettable | Counting Direction | No. of Digits | No. of Set Points | Max. Counts per Minute | DIN Size | Ht. | Wd. | Overall Dp. | Input Voltage Range  | Output Relay Current | Environmental Rating | Specifications Met | Each | |
Press On | ||||||||||||||
Screw Terminals | ||||||||||||||
| Yes | Up or Down | 6 | 1 | 1,500 | 1/16 | 1.77" | 1.77" | 3.1" | 12-250V AC, 12-250V DC | 0.5 A @ 230 V AC, 2 A @ 30 V DC | IP65 | UL Recognized Component, C-UL Recognized Component, CE Marked | 0000000 | 0000000 |
Switch-Contact-Actuated Counters
No need for a separate power source—these counters are powered by internal batteries that last more than seven years. Often used in areas where power isn’t easy to access, they work well inside machinery or remote monitoring systems. Wire them to a relay, sensor, switch, or other trigger device on the machine performing repeated tasks. The counter receives a signal from the trigger device to track how many times the task has occurred and shows that number on the display.
All can be connected to a separate input, button, or switch to reset the counter to zero directly or at a distance. Those with a manual reset button can be set to zero with a simple push.
NEMA 4 rated counters are protected from dust and washdowns. They’re also safe to use outdoors.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resettable | Counting Direction | No. of Digits | Max. Counts per Minute | DIN Size | Ht. | Wd. | Ht. | Wd. | Dp. | Batteries Replaceable | Features | Environmental Rating | Each | |
Press On | ||||||||||||||
Screw Terminals | ||||||||||||||
| Yes | Up | 8 | 60,000 | 1/32 | 0.87" | 1.77" | 1" | 1.9" | 2" | Yes | Battery-Powered Display, Manual Reset Button, Remote Reset | NEMA 4 | 0000000 | 0000000 |
Tab Terminals | ||||||||||||||
| Yes | Up | 6 | 1,080 | __ | 0.87" | 1.16" | 0.9" | 1.2" | 0.5" | Yes | Battery-Powered Display, Remote Reset | __ | 0000000 | 00000 |
Counters/Ratemeters
Wire these counters/ratemeters to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute. A scaling function lets you adjust the unit of measure to suit your application. Use the toggle button to switch between the count and the rate. IP or NEMA rated, they protect against dust and washdowns and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resettable | Counting Direction | No. of Digits | Max. Counts per Minute (Input Type) | Ht. | Wd. | Ht. | Wd. | Dp. | Input Voltage | Features | Environmental Rating | Specifications Met | Each | |
Press On | ||||||||||||||
Screw Terminals | ||||||||||||||
| Yes | Up | 6 | 3,600,000 (Voltage), 1,800 (Switch Contact) | 0.874" | 1.772" | 0.945" | 1.89" | 2.729" | 4-30V DC (High Level), 0-2V DC (Low Level) | Scaling Function, Toggle Button | IP65 | UL Recognized Component, C-UL Recognized Component, CE Marked | 0000000 | 0000000 |
Panel-Mount Electrically Actuated Hour Meters
Display running time on a machine so you can schedule preventative maintenance.
Non-resettable meters prevent tampering and accidental loss of data.
For Panel Cutout | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resettable | Counting Direction | No. of Digits | Dia. | Wd. | Ht. | Ht. | Wd. | Dp. | Dia. | Operating Voltage | Each | ||
Press On | |||||||||||||
Screw Terminals | |||||||||||||
| K | No | Up | 7 | __ | 1.8" | 0.9" | 2.1" | 2.1" | 1.6" | __ | 24V AC | 0000000 | 0000000 |
| K | No | Up | 7 | __ | 1.8" | 0.9" | 2.1" | 2.1" | 1.6" | __ | 120V AC | 0000000 | 000000 |
| K | No | Up | 7 | __ | 1.8" | 0.9" | 2.1" | 2.1" | 1.6" | __ | 230V AC | 0000000 | 000000 |
0.25" Quick-Disconnect Terminals | |||||||||||||
| L | No | Up | 6 | 2" | __ | __ | __ | __ | 1.3" | 2.4" | 24V AC | 0000000 | 00000 |
| L | No | Up | 6 | 2" | __ | __ | __ | __ | 1.3" | 2.4" | 120V AC | 0000000 | 00000 |
| L | No | Up | 6 | 2" | __ | __ | __ | __ | 1.3" | 2.4" | 230V AC | 0000000 | 00000 |
| M | No | Up | 5 | 2" | __ | __ | __ | __ | 2" | 2.3" | 8-32V DC | 0000000 | 00000 |
| N | No | Up | 6 | 2.1" | __ | __ | __ | __ | 0.6" | 2.3" | 15-75V AC, 9-60V DC | 0000000 | 00000 |
| N | No | Up | 6 | 2.1" | __ | __ | __ | __ | 0.6" | 2.3" | 75-270V AC, 36-185V DC | 0000000 | 00000 |
DIN-Rail-Mount Electrically Actuated Hour Meters
Quickly install these meters onto a DIN rail instead of on a surface or into panels. Use them to display running time on a machine so you can schedule preventative maintenance. They are non-resettable to prevent tampering and accidental loss of data.
Electrically Actuated Hour Meters with Output Relay
Display running time on a machine so you can schedule preventative maintenance. These counters have two displays. One display shows the total running time and cannot be reset; the other shows the time elapsed since the last maintenance and can be wired for remote reset. The output relay turns on an indicator light and sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Resettable | Counting Direction | No. of Digits | No. of Set Points | For Panel Cutout Dia. | Dp. | Dia. | Operating Voltage | Output Relay Current | Environmental Rating | Each | |
Press On | |||||||||||
Wire Leads | |||||||||||
| No | Up | 6 | 1 | 2" | 1.7" | 2.3" | 85-265V AC, 90-360V DC | 0.2 A @ 265 V AC, 0.2 A @ 40 V DC | IP67 | 00000000 | 0000000 |
| No | Up | 6 | 1 | 2" | 1.7" | 2.3" | 10-40V DC | 0.2 A @ 265 V AC, 0.2 A @ 40 V DC | IP67 | 00000000 | 000000 |
Vibration-Actuated Hour Meters
Record the running time of machines and vehicles that vibrate while operating. These meters are battery powered, so they don’t require any special wiring or external power source. IP67 or IP68 rated, they seal out water from temporary submersion.
Non-resettable counters prevent tampering and accidental loss of data.
Counters/Hour Meters
Keep track of time while counting events. Units have two displays: one that receives input from a sensor, encoder, or switch and another that counts hours.
For technical drawings and 3-D models, click on a part number.
Mechanical Position Indicators
 Indicator (For Horizontal Shaft) |  Indicator Display (1 Decimal Place) |  Indicator Display (2 Decimal Places) |
 Indicator Display (3 Decimal Places) |  Indicator (For Vertical Shaft) |
Tracking your machine component as it moves along a rotating threaded shaft, such as a spindle or lead screw, these indicators help you adjust machinery with speed and precision. They save time and prevent errors on process lines that you constantly adapt to suit different products, such as packaging lines.
Use the display number as either a reference point or as a true measure of distance. To measure distance, match the indicator’s count per revolution to your lead screw’s threads per inch or thread pitch.
Choose between indicators that count up when your lead screw rotates clockwise or counterclockwise.
Indicators with a stainless steel insert resist corrosion better than indicators with a black-oxide insert, making them better in humid locations.
Add shaft locking clamps to keep indicators in place and prevent vibration from shifting them.
Add shaft reducer bushings to adapt indicators to fit small diameter shafts.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Decimal Places | No. of Digits | Max. Counts per Min. | Counts Per Revolution | Resettable | Counting Direction (Shaft Rotation Direction) | Ht. | Wd. | Dp. | Housing Material | Color | Temp. Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||||||||
Black-Oxide Steel Insert | |||||||||||||
| 1 | 4 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 1.9" | 1.3" | 1.4" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
| 2 | 4 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 1.9" | 1.3" | 1.4" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 2 | 4 | 250 | 0.5 | No | Up (Clockwise), Down (Counterclockwise) | 1.9" | 1.3" | 1.4" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 2 | 4 | 250 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 1.9" | 1.3" | 1.4" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||||||
Black-Oxide Steel Insert | |||||||||||||
| 1 | 5 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 1 | 5 | 1,500 | 1 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 2 | 5 | 15 | 0.01 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 75 | 0.05 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 150 | 0.1 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.2 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.2 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.5 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.5 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 1 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 3 | 5 | 25 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
303 Stainless Steel Insert | |||||||||||||
| 1 | 5 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
| 2 | 5 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
| 2 | 5 | 250 | 0.5 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
| 2 | 5 | 250 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
For 20mm Shaft Dia. | |||||||||||||
Black-Oxide Steel Insert | |||||||||||||
| 1 | 5 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 1 | 5 | 1,500 | 1 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 2 | 5 | 15 | 0.01 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 150 | 0.1 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.2 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.5 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.5 | No | Up (Counterclockwise), Down (Clockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
303 Stainless Steel Insert | |||||||||||||
| 1 | 5 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Decimal Places | No. of Digits | Max. Counts per Min. | Counts Per Revolution | Resettable | Counting Direction (Shaft Rotation Direction) | Ht. | Wd. | Dp. | Housing Material | Color | Temp. Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||||||||
Black-Oxide Steel Insert | |||||||||||||
| 1 | 4 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 1.9" | 1.3" | 1.4" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
| 2 | 4 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 1.9" | 1.3" | 1.4" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||||||
Black-Oxide Steel Insert | |||||||||||||
| 1 | 5 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 2 | 5 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.2 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.5 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
303 Stainless Steel Insert | |||||||||||||
| 2 | 5 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 000000 |
For 20mm Shaft Dia. | |||||||||||||
Black-Oxide Steel Insert | |||||||||||||
| 1 | 5 | 1,500 | 1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 00000000 | 00000 |
| 2 | 5 | 150 | 0.1 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.2 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
| 2 | 5 | 250 | 0.5 | No | Up (Clockwise), Down (Counterclockwise) | 2.6" | 1.9" | 1.5" | Plastic | Orange | 32° to 175° | 0000000 | 00000 |
Black-Oxide Steel | Stainless Steel | ||||||
|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Length | Set Screw Included | Each | Each | ||
| 1/4" | 3/4" | 1" | Yes | 0000000 | 000000 | 000000 | 00 |
| 3/8" | 3/4" | 1" | Yes | 0000000 | 00000 | 0000000 | 000000 |
| 1/2" | 3/4" | 1" | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 5/8" | 3/4" | 1" | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 12mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 14mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 15mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 16mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
Digital Position Indicators
More customizable than standard indicators, these digital indicators have programmable features that help you adapt them to your application. Like other indicators, they track your machine component as it moves along a rotating spindle, lead screw, or other threaded shaft, which helps you adjust machinery with speed and precision. This saves time and prevents errors on process lines that you constantly adapt for different products, such as packaging lines.
Program the number you want added per revolution—you can use these indicators as a reference point or as a true measure of distance. To measure distance, match the indicator’s count per revolution to your lead screw’s threads per inch or thread pitch. You can adjust them to count from their original position or from their most recent stopping point, which is useful for repeating moves. They also have settings to work with clockwise and counterclockwise rotation, as well as vertical and horizontal shafts.
Rated IP67, all are sealed against dust and water, even if briefly submerged. They meet IEC 61326-1, which is an international standard for electromagnetic immunity and emissions.
Add shaft reducer bushings to adapt indicators to fit small diameter shafts. Stainless steel bushings are more corrosion resistant than black-oxide steel bushings, so they’re better in humid locations.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Digits | Max. Speed, rpm | Resettable | Counting Direction (Shaft Rotation Direction) | Ht. | Wd. | Dp. | Housing Material | Color | Batteries Included | Temp. Range, °F | Environmental Rating | Each | |
For 1/2" Shaft Dia. | |||||||||||||
For Horizontal and Vertical Shafts | |||||||||||||
| 5 | 1,000 | Yes | Up and Down (Clockwise and Counterclockwise) | 2.2" | 1.4" | 1.4" | Plastic | Orange | Yes | 32° to 120° | IP67 | 0000000 | 0000000 |
For 3/4" Shaft Dia. | |||||||||||||
For Horizontal and Vertical Shafts | |||||||||||||
| 6 | 1,000 | Yes | Up and Down (Clockwise and Counterclockwise) | 2.9" | 1.9" | 1.6" | Plastic | Orange | Yes | 32° to 120° | IP67 | 0000000 | 000000 |
For 20mm Shaft Dia. | |||||||||||||
For Horizontal and Vertical Shafts | |||||||||||||
| 6 | 1,000 | Yes | Up and Down (Clockwise and Counterclockwise) | 2.9" | 1.9" | 1.6" | Plastic | Orange | Yes | 32° to 120° | IP67 | 0000000 | 000000 |
Black-Oxide Steel | Stainless Steel | ||||||
|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Length | Set Screw Included | Each | Each | ||
| 1/4" | 3/4" | 1" | Yes | 0000000 | 000000 | 000000 | 00 |
| 3/8" | 3/4" | 1" | Yes | 0000000 | 00000 | 0000000 | 000000 |
| 1/2" | 3/4" | 1" | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 5/8" | 3/4" | 1" | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 12mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 14mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 15mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 16mm | 20mm | 20mm | Yes | 0000000 | 00000 | 0000000 | 00000 |