M50 Cord Grips | McMaster-Carr

Filter by

System of Measurement

Cord OD

Thread Size

Cord Holding Type

Shape

Knockout Trade Size

Material

For Total Number of Cords

Knockout Connection

Thread Type

Enclosure Rating

Environment

Number of Cords

Mounting Location

Color

For Cord Shape

For Number of Inserts

Flexibility

Bushing Material

REACH Compliance

Connects To

Maximum Temperature

Certification

Forward

How can we improve?

12 Products

Plastic Submersible Cord Grips

Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 for protection from dusty environments and prolonged submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All are CE marked and TUV Rheinland certified, which means they meet European safety standards. Grips with UL certifications meet American safety standards, while those with C-UL and CSA certifications meet Canadian safety standards. Some also meet standards for marine vessels classed by DNV-GL.

Grips with metric threads meet IP69 for protection from high-pressure washdowns.

For technical drawings and 3-D models, click on a part number.

							Each
For Cord OD	For Knockout Trade Size	Temp. Range, °F	Features	Environmental Rating	Specifications Met		1-9	10-Up
Metric Threads
0.94"-1.14"	M50	0° to 175°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 6, NEMA 12, IP66, IP68, IP69	UL Listed, C-UL Listed, CE Marked, DNV-GL Type Approved, TUV Rheinland Certified, VDE Certified	0000000	000000	000000
1.06"-1.33"	M50	0° to 175°	Nylon Plastic Locknut, Rubber O-Ring	NEMA 6, NEMA 12, IP66, IP68, IP69	UL Listed, C-UL Listed, CE Marked, DNV-GL Type Approved, TUV Rheinland Certified, VDE Certified	0000000	00000	00000

Screw-Down Sure-Grip Plastic Submersible Cord Grips

Tighten the screw-down clamp on these grips for superior pull-out resistance while relieving tension at connection points. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection against high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.

Metric Threads
For Cord OD	For Knockout Trade Size	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
1.26"-1.5"	M50	Black Nylon Plastic	0° to 155°	Rubber O-Ring, Nylon Plastic Locknut	IP68, IP69K, NEMA 4X, NEMA 6	UL 94 V-0, CE Marked, DNV-GL Type Approved	00000000	000000

Low-Temperature Brass Submersible Cord Grips

Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F. They’re NEMA and IP rated, so you can safely submerse them under water, though only for short periods of time. They also stand up to dust, weather, washdowns, and oil. Nickel plated, they resist corrosion. All of these grips relieve strain on your cord if it’s pulled, prolonging its life.

For technical drawings and 3-D models, click on a part number.

Metric Threads
For Cord OD	For Knockout Trade Size	Temperature Range, °F	Features	Environmental Rating	Specifications Met		Each
0.87"-1.14"	M50	-75° to 210°	Nickel-Plated Brass Locknut, Rubber O-Ring	NEMA 4X, NEMA 6, NEMA 12, IP68	CE Marked, UL Recognized Component, VDE Certified	0000000	000000
1.07"-1.37"	M50	-75° to 210°	Nickel-Plated Brass Locknut, Rubber O-Ring	NEMA 4X, NEMA 6, NEMA 12, IP68	CE Marked, UL Recognized Component, VDE Certified	0000000	00000

Wraparound Multi-Cord Grips

Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors. Choose a housing and then select inserts (sold separately). Inserts have a slit, eliminating the need to thread cable through them.

For technical drawings and 3-D models, click on a part number.

Knockout-Mount Housings

Knockout-Mount Housing

Knockout-Mount Housing Shown Open

2 Small Inserts

		For Insert
For No. of Inserts	For Knockout Trade Size	Ht.	Wd.	Size	Thread Type	For Max. Panel Thick.	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
Gray Polycarbonate Plastic
2	M50	0.83"	0.83"	Small	Metric	0.31"	-20° to 190°	Nylon Plastic Locknut, Rubber Gasket	NEMA 12, IP54	UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved	0000000	000000

Low-Profile Submersible Break-Through Multi-Cord Grips

For 8 cords

For 10 Cords

For 12 Cords

For 19 Cords

For 78 Cords

The face of these grips is flush with the cable-entry point for a seamless appearance. They have a thin, flexible seal that covers the holes until you push a cord through. Grips are rated IP66, IP68, NEMA 4X, and NEMA 12 for protection from continuous submersion, washdowns and oil/coolant splashing.

For technical drawings and 3-D models, click on a part number.

For 8 Cords
Shape	For Cord OD (No. of Cords)	For Knockout Trade Size	Thread Type	For Max. Panel Thick.	Material	Temp. Range, °F	Features	Environmental Rating	Specifications Met		Each
Straight	0.2"-0.4" (5), 0.28"-0.49" (3)	M50	Metric	0.32"	Gray Nylon Plastic	-40° to 190°	Nylon Plastic Locknut	NEMA 4X, NEMA 12, IP66, IP68	UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved	0000000	000000
For 10 Cords
Straight	0.13"-0.26" (7), 0.2"-0.4" (2), 0.63"-0.87" (1)	M50	Metric	0.32"	Gray Nylon Plastic	-40° to 190°	Nylon Plastic Locknut	NEMA 4X, NEMA 12, IP66, IP68	UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved	0000000	00000
For 12 Cords
Straight	0.13"-0.25" (4), 0.2"-0.4" (8)	M50	Metric	0.32"	Gray Nylon Plastic	-40° to 190°	Nylon Plastic Locknut	NEMA 4X, NEMA 12, IP66, IP68	UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved	0000000	00000
For 19 Cords
Straight	0.13"-0.26"	M50	Metric	0.32"	Gray Nylon Plastic	-40° to 190°	Nylon Plastic Locknut	NEMA 4X, NEMA 12, IP66, IP68	UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved	0000000	00000
For 78 Cords
Straight	0.06"-0.1" (76), 0.1"-0.2" (2)	M50	Metric	0.32"	Gray Nylon Plastic	-40° to 190°	Nylon Plastic Locknut	NEMA 4X, NEMA 12, IP66, IP68	UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved	0000000	00000

Conduit and Cord Grip Thread Adapters

PG × Metric

Adapt metric, NPT, and PG conduit and cord grip threads to match knockout threads. A rubber O-ring seals out moisture.

Nylon adapters are lightweight and chemical resistant.

For technical drawings and 3-D models, click on a part number.

Conduit and Cord Grip Connection			Electrical Box Connection			Nylon Plastic
Thread Size	Thread Type	Gender	Thread Size	Thread Type	Gender		Each
PG × Metric
PG-36	PG	Female	M50	Metric	Male	0000000	000000