Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All meet UL 746C f1, so they’re UV resistant and can be used in direct sunlight, as well as UL 94 V-0, which means they’ll self-extinguish within 10 seconds of catching fire and won’t spread flames by dripping. UL listed and CSA certified, they meet U.S. and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.

Made of PBT, these grips resist soaking up water in washdown and other wet environments while securing cords with an extra-strong hold. They’re less likely to crack and corrode from moisture than other types of plastic and metal, and they stand up to chemicals. Because they’re IP and NEMA rated, they seal out water from rain, washdowns, and brief submersion, as well as dust and oil. A stainless steel mesh gives them extra holding strength and reduces stress on your cord from bending and kinking, prolonging its life. This makes them best for cords on handheld equipment, robots, and other moving machines.

For technical drawings and 3-D models, click on a part number.

Lighter in weight than steel and brass grips, these aluminum grips are strong enough to secure cords in demanding wet environments. All offer strain relief to extend cord life. They are NEMA and IP rated, so they’ll stand up to dust, oil, washdowns, and temporary submersion in water.

For technical drawings and 3-D models, click on a part number.

Stop cords from coming loose in wet environments while keeping them along the side of your enclosure in tight spaces. A 90° bend and strain relief prevent your cord from kinking and pulling out, prolonging the cord's life. Made of aluminum, these grips are lighter in weight than steel and brass grips, yet strong enough for demanding applications. Since they’re IP and NEMA rated, they seal out dust, oil, and water from weather, washdowns, and brief submersion to protect parts in your enclosure.

For technical drawings and 3-D models, click on a part number.

Create a tight grip on cords in wet environments while reducing stress from bending—the 90° angle of these cord grips routes cords to fit tight spaces in enclosures and panels. Made of aluminum, these grips are lighter than steel and brass, yet strong enough to withstand use in demanding environments. A wire mesh extension gives these cord grips extra hold and stability, which reduces the stress of bending and helps extend the lifespan of cords. They’re good for applications with a lot of movement, such as handheld equipment, moving machinery, and robotics. NEMA and IP rated, these cords withstand use under water and protect electronics inside enclosures from moisture, oil, and harsh chemicals.

For technical drawings and 3-D models, click on a part number.

These grips have an extension that provides extra support for moving cable and prevents kinking for longer cable life. Use in applications where cords are underwater—these grips are rated IP68 and IP69K for protection from continuous submersion and high-pressure, high-temperature washdowns. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection. They are nickel plated for good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

An internal ring keeps cables with braid shielding grounded to the body of the grip to maintain the shielding's ability to block electromagnetic interference (EMI). Grips have a rubber bushing and O-ring that create a tight seal to prevent liquid from entering the connection. They are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water.

For technical drawings and 3-D models, click on a part number.

These cord grips are lightweight yet durable. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.

Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and one or two O-rings.

For technical drawings and 3-D models, click on a part number.

These cord grips are lightweight yet durable. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.

Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and one or two O-rings.

For technical drawings and 3-D models, click on a part number.

Made of nylon, these grips resist chemicals. They have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.

Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.

For technical drawings and 3-D models, click on a part number.

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.

Steel cord grips have colored inner rings so you can identify their size at a glance.

Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.

For technical drawings and 3-D models, click on a part number.

Able to stand up to rust better than steel grips, these 300 series stainless steel grips secure electrical cables in corrosive environments. They’re also stronger than aluminum grips. All have a nylon plastic inner ring and rubber bushing that keep cables from disconnecting without cutting into their outer sheath. The ring and bushing form a seal around your cord to block out water.

Add a locknut and O-ring kit to create a liquid-tight seal between these cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit comes with two locknuts and two O-rings—enough for two cord grips.

For technical drawings and 3-D models, click on a part number.

These stainless steel grips offer the most protection from wet, corrosive environments of any of our metal wet-location cord grips. A rubber bushing and O-ring seal out dirt, moisture, coolant, and corrosive fumes. They are rated IP67 for protection from temporary water submersion.

For technical drawings and 3-D models, click on a part number.

A mesh extension offers a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for long cable life. These grips are stainless steel for the most protection from wet, corrosive environments of any of our metal wet-location cord grips. A rubber bushing and O-ring to seal out dirt, moisture, coolant, and corrosive fumes. They are rated IP67 for protection from temporary water submersion.

For technical drawings and 3-D models, click on a part number.

Securely connect cable in sanitary environments such as food plants with these watertight cord grips. IP68 and IP69 ratings mean they can be submerged in water for up to 30 minutes, and stand up to high-temperature, high-pressure washdowns, so they will shield cable from both clean-out-of-place (COP) soaking and clean-in-place (CIP) washdowns.

With no exposed threads and a smooth finish, these grips are easy to wash and are free of space where bacteria could grow, reducing the chance of foodborne illnesses. A rubber bushing seals the connection to the cord, and a rubber seal blocks water and contaminants from entering your enclosure. In case they fall into your line, both the bushing and seal are FDA compliant for direct contact with food. They are also blue, so you can easily spot them. The rest of these cord grips are made of stainless steel, which won’t corrode when washed with harsh cleaners.

Use them indoors or out, they're also NEMA rated to protect against dirt, oil, water, and coolant. All meet U.S. and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.