1/8 Hard Copper | McMaster-Carr

Filter by

System of Measurement

Thickness

Width

Length

Material

Shape

Temper Rating

Temper Designation

Specifications Met

Appearance

Certificate Type

Hardness Rating

Fabrication

Hardness

Thermal Conductivity @ Temperature

Melting Point Temperature

Density

DFARS Compliance

Tolerance Rating

Yield Strength

Modulus of Elasticity

Heat Treatable

RoHS Compliance

REACH Compliance

Surface Resistivity

Elongation

Mechanical Finish

Forward

How can we improve?

238 Products

About Copper, Brass, & Bronze

Compare electrical conductivity, machinability, formability, and more to identify the best material for your application.

Multipurpose 110 Copper Sheets and Bars

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Hardened Temper Sheets

Yield Strength:
H00, H01 Temper sheets: Not Rated
H02 Temper sheets: 37,000 psi
Hardness:
H00, H01 Temper sheets: Rockwell F40 (Soft)
H02 Temper sheets: Rockwell F83 (Soft)
Temper:
See Table
Heat Treatable: No
Specifications Met:
0.016" thick. sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 24"
Thick.	Thick. Tolerance Range	Temper	Temper Rating		Each
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1/4"	-0.012" to 0.012"	H00	1/8 Hard	00000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1"	-0.024" to 0.024"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1 1/4"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1 1/2"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
4" × 24"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000
1/4"	-0.012" to 0.012"	H00	1/8 Hard	00000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1"	-0.024" to 0.024"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1 1/4"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1 1/2"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
6" × 6"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000
1/4"	-0.012" to 0.012"	H00	1/8 Hard	0000000	00000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1"	-0.024" to 0.024"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1 1/4"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1 1/2"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
6" × 24"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000
1/4"	-0.012" to 0.012"	H00	1/8 Hard	00000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1"	-0.024" to 0.024"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1 1/4"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1 1/2"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
12" × 12"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000
1/4"	-0.012" to 0.012"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1"	-0.024" to 0.024"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1 1/4"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1 1/2"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
12" × 24"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000
1/4"	-0.012" to 0.012"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
1"	-0.024" to 0.024"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
1 1/4"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
1 1/2"	-0.029" to 0.029"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
12" × 48"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1/4"	-0.012" to 0.012"	H00	1/8 Hard	00000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	00000000
24" × 24"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	00000000	000000
1/4"	-0.012" to 0.012"	H00	1/8 Hard	0000000	000000
0.313"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
3/8"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
1/2"	-0.015" to 0.015"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
5/8"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
3/4"	-0.019" to 0.019"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	00000000
36" × 48"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000
36" × 96"
0.016"	-0.003" to 0.003"	H00 to H01	1/8 Hard to 1/4 Hard	0000000	000000

Mirror-Like Multipurpose 110 Copper Sheets

Yield Strength: 36,000 psi
Hardness: Rockwell B40 (Soft)
Temper: See Table
Heat Treatable: No
Specifications Met: ASTM B152

Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

12" × 12"
Thick.	Thick. Tolerance Range	Temper	Temper Rating	Mechanical Finish	Flatness Tolerance		Each
0.032"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.04"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000
0.062"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.08"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/8"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/4"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
12" × 24"
0.032"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.04"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.062"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.08"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/8"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/4"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
24" × 24"
0.032"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.04"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.062"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.08"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/8"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000000
1/4"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000000

Brushed Multipurpose 110 Copper Sheets

Yield Strength: 36,000 psi
Hardness: Rockwell B40 (Soft)
Temper: See Table
Heat Treatable: No
Specifications Met: ASTM B152

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

12" × 12"
Thick.	Thick. Tolerance Range	Temper	Temper Rating	Mechanical Finish	Flatness Tolerance		Each
0.032"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.04"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000
0.062"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.08"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/8"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/4"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
12" × 24"
0.032"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.04"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.062"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.08"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/8"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/4"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
24" × 24"
0.032"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.04"	-0.005" to 0.005"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.062"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.08"	-0.007" to 0.007"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
1/8"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000000
1/4"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000000

Super-Conductive 101 Copper Sheets and Bars

With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

1/8 to 1/4 Hard Temper Sheets

Yield Strength: 34,000 psi
Hardness: Rockwell F60 (Soft)
Temper: H00 (1/8 Hard) to H01 (1/4 Hard)
Heat Treatable: No
Specifications Met: ASTM B152, ASTM F68

2" × 24"
Thick.	Thick. Tolerance Range		Each
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	000000000	00000
1/8"	-0.006" to 0.006"	000000000	00000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000
4" × 24"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	000000000	000000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000
6" × 6"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	00000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	00000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	00000000	00000
1/8"	-0.006" to 0.006"	00000000	00000
3/16"	-0.007" to 0.007"	000000000	00000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	000000
1/2"	-0.015" to 0.015"	00000000	000000
6" × 12"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	000000000	00000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000
6" × 24"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	000000000	000000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000

12" × 12"
Thick.	Thick. Tolerance Range		Each
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	00000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	00000000	00000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	000000
1/2"	-0.015" to 0.015"	00000000	000000
12" × 24"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	00000000	00000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	00000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	000000
1/2"	-0.015" to 0.015"	00000000	000000
12" × 48"
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	00000000	000000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	00000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	00000000
1/2"	-0.015" to 0.015"	00000000	00000000
24" × 24"
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	000000000	000000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	000000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	000000000	000000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	00000000
1/2"	-0.015" to 0.015"	000000000	00000000
24" × 48"
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	00000000	000000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	00000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	00000000
3/16"	-0.007" to 0.007"	000000000	00000000
1/4"	-0.009" to 0.009"	00000000	00000000
3/8"	-0.012" to 0.012"	00000000	00000000
1/2"	-0.015" to 0.015"	00000000	00000000