Join copper, copper-silicon, and copper-zinc to themselves and to steel.

Join copper, copper-silicon, and copper-zinc to themselves and to steel.

Weld copper, brass, or bronze.

The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover.

The flux leaves minimal residue so there's no need for cleanup.

Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.

Electrically conductive, this solder is best for electronics and electronics applications.

The high melting point prevents remelting when soldering successive joints with another solder.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

The flux leaves minimal residue so there's no cleanup.

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.

This solder is commonly used in solder melting pots.

The flux leaves minimal residue so there's no cleanup.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

This flux is the fastest to remove from plumbing pipelines.

Fortified with tin, this flux protects nondrinking water pipes from oxidation, especially under temperatures up to 600° F.

A special formulation of Nokorode soldering flux, this flux remains thick at temperatures up to 115° F and protects your solder joint from corrosion.

The flux residue easily washes away with water.

With the strongest cleaning power, this flux is fully activated to clean and prepare electrical assemblies and printed circuit boards for soldering applications up to 840° F.

Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.

This flux has less cleaning action, but leaves the least amount of residue.

No need to add flux—these alloys have it built in.

Fill in tight gaps without needing to add flux before you braze—these alloys have flux built in. When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys.

No need to add flux—these alloys have it built in.

Don't worry about adding flux when brazing corrosion resistant metals such as 300-series stainless steel—these alloys have it built in.

To fill in large gaps, these BAg-2 alloys melt into a thicker liquid than standard brazing alloys.

Flux is already built into these alloys, so there’s no need to add it when joining aluminum to copper.

Melting into a thick liquid, these BCuP-3 alloys fill in larger gaps than standard brazing alloys for copper.

Join copper tubing and tube fittings with these BCuP-5 alloys that create a stronger bond than standard brazing alloys for copper.

Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.