An enclosed ratchet feed opens quickly to accept tubing and instantly slides to cutting position. These cutters have grooved rollers for clearance to cut flared tube ends with little material loss. The adjustment screw is enclosed to prevent damage from chips and debris.

Rollers have a groove that provides clearance to cut flared tube ends with little material loss.

This cutter has two sets of guide wheels that ride in the corrugations for stability so you get clean, precise cuts.

After cutting, crimp tubing in preparation for making connections. Rollers have a groove for clearance to cut flared tube ends with little material loss. An enclosed adjustment screw prevents damage from chips and debris.

Made of materials that are FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They're also nonmagnetic.

Warning: Do not use these tools in direct contact with acetylene.

Needing less than 1 1/2" of space around them, these cutters are great for crowded tubing systems. Their C-shape keeps them compact because there's no handle to get in the way as you spin them around your tubing. Snap them onto your tubing and a spring-loaded cutting wheel tightens as you turn them. Make sure to rotate it in the same direction as the arrows etched on the cutter.

Style B cutters give you more leverage for tough cuts. They have notches where you can fit the tip of a slotted screwdriver to use the driver as a handle.

Ratcheting handle provides extra leverage.

This set contains three of the most common sizes of tube cutters, neatly packed in a convenient carrying case. These cutters require less than 1 1/4" of space around them, making them ideal for use in crowded tubing systems. Also known as c-cutters, they don’t have a handle that gets in the way as you spin them to cut. Pick the right size for your job then snap the cutter onto your tubing. A spring-loaded cutting wheel tightens as you turn it. Make sure to rotate it in the same direction as the arrows etched on the cutter.

Ratchet action permits cutting in cramped areas.

An insulated handle protects against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. They have grooved rollers that provide clearance to cut flared tube ends with little material loss.

Turn this cutter 360° around a pipe to make a cut.

Ratchet action permits cutting in cramped areas, and moves the cutter 360° around a pipe.

For technical drawings and 3-D models, click on a part number.

Cut through copper tubes up to 10 times faster and with less effort than manual tube cutters. These cutters are light enough to carry around, easy to use with one hand, and are good for up to 200 cuts on a single battery charge. Use them to make perpendicular cuts, so you can easily add fittings. Unlike manual cutters, you don’t need to spin them around your tube to cut all the way through. When you pull the trigger, the cutting wheel rotates around your tube, cutting and scoring as it moves. This makes them good for confined spaces—they only need 1 1/2" of clearance to cut through a tube installed near a wall or another tube.

An LED illuminates what you’re cutting in dim and dark areas. To prevent accidental cuts, you can lock the trigger when the cutter is not in use. The cutting wheel has a black-oxide coating to resist corroding in dry environments.