About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
Large-Diameter Conveyor Rollers
Steel rollers are stronger than aluminum rollers.
Sealed bearings keep out dirt and moisture for longer life.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
1 3/16" Round Axle | ||||||||
4" Dia. Steel Roller | ||||||||
| 10" | 9 1/16" | 9 | 6,055 | 11 9/16" | Sealed | -10° to 225° | 0000000 | 0000000 |
| 12" | 11 1/16" | 9 | 6,050 | 13 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 16" | 15 1/16" | 9 | 6,050 | 17 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 18" | 17 1/16" | 9 | 6,050 | 19 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 20" | 19 1/16" | 9 | 6,050 | 21 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 24" | 23 1/16" | 9 | 6,045 | 25 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 28" | 27 1/16" | 9 | 6,045 | 29 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 30" | 29 1/16" | 9 | 6,045 | 31 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 33" | 32 1/16" | 9 | 5,550 | 34 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 36" | 35 1/16" | 9 | 5,070 | 37 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 40" | 39 1/16" | 9 | 4,555 | 41 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 48" | 47 1/16" | 9 | 3,770 | 49 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 50" | 49 1/16" | 9 | 3,615 | 51 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
| 60" | 59 1/16" | 9 | 2,995 | 61 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
Abrasion-Resistant Rollers
These urethane rollers are nonmarring and wear resistant. Mount them directly onto your shaft or build a custom roller by adding your own hub. Rollers with steel insert have a retaining ring groove for securing a ball bearing.
For technical drawings and 3-D models, click on a part number.
Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Mount them directly onto your shaft or build a custom roller by adding your own hub.
For technical drawings and 3-D models, click on a part number.
Drive Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 000000 | |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 0000000 | 00000 | |
Abrasion-Resistant Drive Rollers
These urethane rollers are nonmarring and wear resistant. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 000000 | |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1 1/4" | 1 5/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 60A (Medium) Blue | 0000000 | 00000 |
Self-Cleaning Drive Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Ridges on the surface push dirt and debris out of the way. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Steel Hub | |||||||||||
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | 35A (Soft) Black | 0000000 | 000000 |
Abrasion-Resistant Self-Cleaning Drive Rollers
These urethane rollers are nonmarring and wear resistant. Ridges on the surface push dirt and debris out of the way. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
Abrasion-Resistant Flex-Grip Drive Rollers
These urethane rollers are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Flexible Urethane Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||||||
| 4" | 1" | 1/2" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1/2" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Flex-Grip Press-Fit Drive Rollers
Mount these rollers directly onto your shaft without the need for set screws or keyways. They have a press-fit hub, but you can add your own hub to create a custom roller. Made of urethane, they are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers spin with the shaft or stud to transfer power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Flexible Urethane Roller with Steel Hub | |||||||
| 4" | 1" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
| 4" | 1" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||
| 4" | 1" | 3/4" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 3/4" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Flex-Grip Drive Rollers
These neoprene rollers are wear and chemical resistant. The teardrop-shaped sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Color | Each | |
20A Durometer (Soft) | |||||||||||
Neoprene Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 000000 | 000000 |
| 4" | 29/32" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 000000 | 00000 |
35A Durometer (Soft) | |||||||||||
Neoprene Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 0000000 | 00000 |
| 4" | 29/32" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 0000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 0000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 200° | Black | 0000000 | 00000 |
Oil-Resistant Flex-Grip Drive Rollers
A good choice for oily environments, these Buna-N rollers are also abrasion resistant and nonmarring. The teardrop-shaped sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Color | Each | |
20A Durometer (Soft) | |||||||||||
Buna-N Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 000000 | 000000 |
| 4" | 29/32" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 000000 | 00000 |
35A Durometer (Soft) | |||||||||||
Buna-N Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 0000000 | 00000 |
| 4" | 29/32" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 0000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 0000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -60° to 175° | White | 0000000 | 00000 |
Abrasion-Resistant Keyed Drive Rollers
These urethane rollers are wear and chemical resistant. They’re also nonmarring. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
Note: The hub on rollers with 1 1/2" to 4" roller diameter protrudes on one side only.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||||
| 4" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 4" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
Keyed Drive Rollers
These rollers are made of SBR rubber. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
Note: The hub on rollers with 3" to 4" roller diameter protrudes on one side only.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
SBR Rubber Roller with Cast Iron Hub | |||||||||||||
| 4" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 000000 |