Large-Diameter Conveyor Rollers
Steel rollers are stronger than aluminum rollers.
Sealed bearings keep out dirt and moisture for longer life.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
1 1/16" Hex Axle | ||||||||
3 1/2" Dia. Steel Roller | ||||||||
| 4" | 3 3/8" | 5 | 1,100 | 5 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 6" | 5 3/8" | 5 | 1,100 | 7 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 8" | 7 3/8" | 5 | 1,100 | 9 1/2" | Sealed | -10° to 250° | 0000000 | 000000 |
| 10" | 9 3/8" | 5 | 1,100 | 11 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 12" | 11 3/8" | 5 | 1,100 | 13 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 14" | 13 3/8" | 5 | 1,100 | 15 1/2" | Sealed | -10° to 250° | 0000000 | 000000 |
| 16" | 15 3/8" | 5 | 1,100 | 17 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 18" | 17 3/8" | 5 | 1,100 | 19 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 20" | 19 3/8" | 5 | 1,100 | 21 1/2" | Sealed | -10° to 250° | 0000000 | 000000 |
| 22" | 21 3/8" | 5 | 1,100 | 23 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 23" | 22 3/8" | 5 | 1,100 | 24 1/2" | Sealed | -10° to 250° | 0000000 | 000000 |
| 24" | 23 3/8" | 5 | 1,100 | 25 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 26" | 25 3/8" | 5 | 1,100 | 27 1/2" | Sealed | -10° to 250° | 0000000 | 000000 |
| 28" | 27 3/8" | 5 | 1,100 | 29 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 30" | 29 3/8" | 5 | 1,100 | 31 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 31" | 30 3/8" | 5 | 1,100 | 32 1/2" | Sealed | -15° to 220° | 0000000 | 000000 |
| 32" | 31 3/8" | 5 | 1,100 | 33 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 34" | 33 3/8" | 5 | 1,100 | 35 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 36" | 35 3/8" | 5 | 1,100 | 37 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 38" | 37 3/8" | 5 | 1,100 | 39 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 39" | 38 3/8" | 5 | 1,100 | 40 1/2" | Sealed | -15° to 220° | 0000000 | 000000 |
| 40" | 39 3/8" | 5 | 1,100 | 41 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 42" | 41 3/8" | 5 | 1,100 | 43 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 44" | 43 3/8" | 5 | 1,100 | 45 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 48" | 47 3/8" | 5 | 1,100 | 49 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 50" | 49 3/8" | 5 | 1,100 | 51 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 51" | 50 3/8" | 5 | 1,100 | 52 1/2" | Sealed | -15° to 220° | 0000000 | 000000 |
| 52" | 51 3/8" | 5 | 1,100 | 53 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 54" | 53 3/8" | 5 | 1,100 | 55 1/2" | __ | -10° to 220° | 00000000 | 000000 |
| 60" | 59 3/8" | 5 | 1,100 | 61 1/2" | __ | -10° to 220° | 00000000 | 000000 |
High-Capacity Large-Diameter Roller Conveyors
For more demanding shipping and assembly applications, these conveyors can carry heavy loads.
Double-shielded bearings keep out dust and debris.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | 6" Roller Spacing | |||||||
|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Bearing Seal Type | Cap. (No. of Stands Required) | No. of Stands Included | Features | Each | |
3 1/2" Dia. Steel Rollers—1" Hex Axle | ||||||||
| 10 1/2" | 7" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 0000000 |
| 10 1/2" | 7" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 12 1/2" | 9" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 12 1/2" | 9" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 18 1/2" | 15" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 18 1/2" | 15" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 24 1/2" | 21" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 24 1/2" | 21" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 30 1/2" | 27" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 30 1/2" | 27" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 36 1/2" | 33" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 36 1/2" | 33" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 48 1/2" | 45" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 48 1/2" | 45" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 52 1/2" | 49" | 5 | Double Shielded | 2,200 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
| 52 1/2" | 49" | 10 | Double Shielded | 2,200 lbs./ft. (3), 1,100 lbs./ft. (2) | None | Connecting Plates | 00000000 | 00000000 |
Protective Covers for Conveyor Rollers
Reduce noise, absorb impact, and extend roller life. The higher the hardness rating, the longer the covers will protect rollers in demanding applications.
Slide-on covers slip over the roller. For easier installation, use lubricant and an air nozzle.
Polyurethane has a high-friction surface for high speeds and inclines.
Lubricant is water based and loses its lubrication properties upon drying to ensure covers retain a snug fit.
Connect air nozzles to a source of compressed air to create a cushion for sliding covers onto the roller.
For technical drawings and 3-D models, click on a part number.
