About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
Small-Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Rollers with stainless steel bearings are more durable than rollers with plastic bearings.
For technical drawings and 3-D models, click on a part number.
Conveyor Rollers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Roller | Replacement Bearings | |||||||||
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Material | Temp. Range, °F | Each | Each | ||
7/16" Hex Axle | ||||||||||
1 3/4" Dia. Stainless Steel Roller | ||||||||||
| 16" | 15 1/2" | 11 | 300 | 17 1/8" | Stainless Steel | -15° to 240° | 0000000 | 0000000 | 0000000 | 000000 |
| 22" | 21 1/2" | 11 | 300 | 23 1/8" | Stainless Steel | -15° to 240° | 0000000 | 000000 | 0000000 | 00000 |
High-Capacity Stainless Steel Roller Conveyors
For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | Roller | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Spacing | Projection | Frame Ht. | Cap. (No. of Stands Required) | Number of Stands Included | Each | |
1 3/4" Dia. Stainless Steel Rollers—7/16" Hex Axle | |||||||||
| 18" | 16" | 5 | 3" | 5/16" | 3 1/2" | 500 lbs./ft. (2) | None | 0000000 | 000000000 |
| 18" | 16" | 10 | 3" | 5/16" | 3 1/2" | 500 lbs./ft. (3), 180 lbs./ft. (2) | None | 0000000 | 00000000 |
| 24" | 22" | 5 | 3" | 5/16" | 3 1/2" | 500 lbs./ft. (2) | None | 0000000 | 00000000 |
| 24" | 22" | 10 | 3" | 5/16" | 3 1/2" | 500 lbs./ft. (3), 180 lbs./ft. (2) | None | 0000000 | 00000000 |
Drive Rollers
Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Thread Size | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Neoprene Roller with Aluminum Hub | ||||||||||||
| 1 3/4" | 3/4" | 1/2" | 1" | 3/8" | Set Screw | 2 | No | 10-32 | -30° to 200° | 55A (Medium) Black | 00000000 | 000000 |
| 1 3/4" | 1" | 5/8" | 1" | 3/8" | Set Screw | 2 | No | 10-32 | -30° to 200° | 55A (Medium) Black | 00000000 | 00000 |