1.9" Diameter Conveyor Rollers
Replace damaged rollers or use multiple rollers to build a custom conveyor.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 19/32" | 16 | 265 | 31 1/4" | -20° to 300° | 0000000 | 000000 |
1/4" Round Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 1/2" | 16 | 125 | 31" | -15° to 220° | 00000000 | 00000 |
3/8" Round Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 7/8" | 16 | 50 | 31" | 0° to 150° | 00000000 | 00000 |
1/2" Round Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 19/32" | 16 | 265 | 31 1/4" | -20° to 140° | 00000000 | 00000 |
Large-Diameter Conveyor Rollers
Steel rollers are stronger than aluminum rollers.
Aluminum rollers are lightweight and corrosion resistant.
Sealed bearings keep out dirt and moisture for longer life.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 30" | 29 9/16" | 12 | 300 | 31 1/8" | __ | -15° to 220° | 0000000 | 000000 |
2 1/2" Dia. Steel Roller | ||||||||
| 30" | 29 3/8" | 14 | 280 | 31 1/8" | __ | -15° to 220° | 0000000 | 00000 |
11/16" Hex Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 30" | 29 5/8" | 11 | 700 | 32" | Shielded | -10° to 225° | 0000000 | 000000 |
2 1/2" Dia. Steel Roller | ||||||||
| 30" | 29 7/16" | 11 | 640 | 32" | __ | -40° to 300° | 0000000 | 00000 |
3" Dia. Steel Roller | ||||||||
| 30" | 28 15/16" | 11 | 840 | 32" | Sealed | -4° to 220° | 0000000 | 000000 |
1 1/16" Hex Axle | ||||||||
3 1/2" Dia. Steel Roller | ||||||||
| 30" | 29 3/8" | 5 | 1,100 | 31 1/2" | __ | -10° to 220° | 00000000 | 000000 |
1/4" Round Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 30" | 29 1/2" | 12 | 190 | 31" | __ | -15° to 220° | 00000000 | 00000 |
2" Dia. Aluminum Roller | ||||||||
| 30" | 29 1/2" | 16 | 65 | 31" | __ | -15° to 220° | 00000000 | 00000 |
1 3/16" Round Axle | ||||||||
4" Dia. Steel Roller | ||||||||
| 30" | 29 1/16" | 9 | 6,045 | 31 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
Small-Diameter Conveyor Rollers
Galvanized steel rollers are strong and have some corrosion resistance. Aluminum rollers are lightweight and more corrosion resistant than galvanized steel.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
1/4" Round Axle | |||||||
3/4" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 3/4" | 20 | 30 | 30 3/4" | -15° to 220° | 0000000 | 000000 |
7/8" Dia. Steel Roller | |||||||
| 30" | 29 3/4" | 13 | 45 | 30 3/4" | -15° to 220° | 0000000 | 00000 |
1 3/8" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 1/2" | 18 | 20 | 31" | -5° to 400° | 0000000 | 00000 |
1 3/8" Dia. Aluminum Roller | |||||||
| 30" | 29 1/2" | 18 | 40 | 31" | -15° to 220° | 00000000 | 00000 |
Small-Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Rollers with stainless steel bearings are more durable than rollers with plastic bearings.
For technical drawings and 3-D models, click on a part number.
Conveyor Rollers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Roller | Replacement Bearings | |||||||||
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Material | Temp. Range, °F | Each | Each | ||
5/16" Hex Axle | ||||||||||
1 3/8" Dia. Stainless Steel Roller | ||||||||||
| 30" | 29 1/2" | 16 | 55 | 31" | Stainless Steel | -20° to 140° | 0000000 | 0000000 | 0000000 | 000000 |
7/16" Hex Axle | ||||||||||
1 5/8" Dia. Stainless Steel Roller | ||||||||||
| 30" | 29 3/8" | 16 | 100 | 31 1/8" | Plastic | 30° to 150° | 0000000 | 000000 | 0000000 | 00000 |
1/4" Round Axle | ||||||||||
3/4" Dia. Stainless Steel Roller | ||||||||||
| 30" | 29 1/8" | 20 | 20 | 31" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 0000 |
1 3/8" Dia. Stainless Steel Roller | ||||||||||
| 30" | 29 3/8" | 16 | 160 | 31" | Plastic | -30° to 165° | 00000000 | 000000 | 000000 | 00 |
1.9" Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Sealed bearings keep out dirt and moisture for longer life.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||
1.9" Dia. Stainless Steel Roller | ||||||||
| 30" | 29 3/8" | 16 | 105 | 31" | Sealed | 10° to 150° | 0000000 | 0000000 |
1.9" Diameter Abrasion-Resistant Conveyor Rollers
The nonmarring roller surface protects material better than all-metal rollers.
PVC rollers are for light duty applications.
Polyethylene-coated rollers are nonstick.
Polyurethane-coated rollers are the most abrasion resistant.
Rollers with quiet-rolling bearings have maintenance-free, precision bearings to reduce conveyor noise.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Thick. | Gauge | Coating Thick. | Cap., lbs. | Overall Wd. | Temp. Range, °F | Features | Each | |
7/16" Hex Axle | ||||||||||
1.9" Dia. PVC Plastic Rollers—Gray | ||||||||||
| 30" | 29 7/8" | 1/8" | __ | __ | 10 | 31" | 14° to 175° | __ | 0000000 | 000000 |
1.9" Dia. Polyethylene-Coated Steel Rollers—White | ||||||||||
| 30" | 29 3/8" | __ | 16 | 0.08" | 105 | 31" | 10° to 150° | Quiet-Rolling Bearings | 0000000 | 000000 |
1.9" Dia. Polyurethane-Coated Steel Rollers—Orange | ||||||||||
| 30" | 29 1/2" | __ | 16 | 0.13" | 250 | 31 1/8" | -20° to 150° | __ | 00000000 | 000000 |
1.9" Dia. Polyurethane-Coated Steel Rollers—Black | ||||||||||
| 30" | 29 3/8" | __ | 16 | 0.08" | 105 | 31" | 10° to 150° | Quiet-Rolling Bearings | 0000000 | 000000 |
1.9" Diameter Dent-Resistant Conveyor Rollers
Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Steel Roller | |||||||
| 30" | 29 7/8" | 12 | 190 | 31" | -20° to 250° | 0000000 | 000000 |
1.9" Diameter Quiet-Rolling Conveyor Rollers
Rollers have maintenance-free, precision bearings to reduce conveyor noise.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 3/32" | 16 | 125 | 31 1/4" | -20° to 165° | 0000000 | 000000 |
Tapered Conveyor Rollers for Curves
Improve tracking on curved sections of 1.9" diameter conveyors. Rollers taper from approximately 2 1/2" diameter on the outside to 1 5/8" on the inside.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1 5/8"-2 1/2" Dia. Galvanized Steel Roller | |||||||
| 30" | 29 7/8" | 14 | 275 | 31 1/4" | -20° to 220° | 00000000 | 0000000 |
Round-Groove Conveyor Rollers
Rollers are grooved to accommodate round belts on line-shaft conveyors.
Rollers with two grooves can be used with motorized roller conveyors.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For Belt Dia. | Wd. | Gauge | Cap., lbs. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | O'all Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle—1.9" Dia. Galvanized Steel Roller | ||||||||||
2 Groove | ||||||||||
| 30" | 3/16" | 30" | 16 | 265 | 2.75" | 1.0" | 31 1/4" | -20° to 350° | 0000000 | 000000 |
Sprocketed Conveyor Rollers
Replace rollers on a chain-driven conveyor.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For ANSI Chain No. | Wd. | Gauge | Cap., lbs. | No. of Sprockets | No. of Teeth per Sprocket | Bearing-to-Sprocket Wd. | Sprocket Ctr.-to-Ctr. Wd. | O'all Wd. | Temp. Range, °F | Each | |
11/16" Hex Axle | ||||||||||||
2 1/2" Dia. Steel Roller | ||||||||||||
| 30" | 40 | 28 15/16" | 11 | 700 | 2 | 21 | 1 1/8" | 1 1/8" | 32" | -4° to 220° | 00000000 | 0000000 |
| 30" | 50 | 28 15/16" | 11 | 700 | 2 | 17 | 1 1/4" | 1 1/8" | 32" | -4° to 220° | 00000000 | 000000 |
| 30" | 60 | 28 15/16" | 11 | 700 | 2 | 15 | 1 1/4" | 1 1/4" | 32" | -4° to 220° | 00000000 | 000000 |
1.9" Diameter V-Groove Conveyor Rollers
Also known as Poly-V rollers, these are designed for use with V-belts. They have sealed bearings to keep out dirt and moisture.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For Belt Trade Size | Wd. | Gauge | Cap., lbs. | Overall Wd. | Hub Dia., mm | For No. of Belt Bands | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||||
1.9" Dia. Galvanized Steel Roller | ||||||||||
| 30" | J | 28 1/4" | 16 | 105 | 31" | 43 | 2, 3, 4 | 10° to 150° | 00000000 | 000000 |
Flexible Roller Conveyors
Expand, curve, and retract the accordion-style frame to position these conveyors wherever you need them. Snake them around obstacles in cramped areas, bend them into a horseshoe to connect two trailers, or stretch them out to extend an existing line. When they’re not in use, retract these conveyors down to a fraction of their length. Their rollers are designed to smoothly transfer flat objects or ones with uneven bottoms. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.
Note: Capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | Roller | |||||||
|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | O'all Ht. | Cap., lbs./ft. | Features | Each | |
3'5" to 12'10" Lg. | ||||||||
1 3/8" Dia. Zinc-Plated Steel Rollers—5/16" Round Axle | ||||||||
| 33" | 30" | 5 1/4" | 1/4" | 28"-44" | 200 | Connecting Hooks, Handle, Package Stop | 0000000 | 000000000 |
6'7" to 24'8" Lg. | ||||||||
1 3/8" Dia. Zinc-Plated Steel Rollers—5/16" Round Axle | ||||||||
| 33" | 30" | 5 1/4" | 1/4" | 28"-44" | 200 | Connecting Hooks, Handle, Package Stop | 0000000 | 00000000 |
Ready-to-Run Flexible Roller Conveyors
Expand, retract, and curve these conveyors wherever you need them—they’re ready to run once you plug them in. These conveyors are ideal in situations where you need flexibility, such as loading and unloading trucks, connecting two trailers, or extending an existing line that you've outgrown. They have rollers to convey objects of different shapes and sizes in assembly, packaging, and shipping applications. To save space, these conveyors compress down to 8 1/2 ft. when they are not in use. They’re sometimes kept in storage as a backup line, so you can pull them out if other conveyors unexpectedly shut down.
Grab the handles at each end to move these conveyors into place. The legs adjust to your desired height. Connecting hooks on each end can fasten them to other conveyors. Lock the casters to keep them in place. A knob on the controller face lets you adjust the speed. To prevent damage, sensors at the end of the conveyor will stop the rollers if a package is nearing the edge.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | Roller | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg. | Spacing | Projection | O'all Ht. | Cap., lbs./ft. | Voltage | Power, hp | Speed, fpm | Features | Each | |
1 1/2" Dia. Zinc-Plated Steel Rollers—1/2" Round Axle | ||||||||||||
| 34" | 30" | 8'6"-24' | 5" | 1/4" | 30"-42" | 145 | 120V AC | 1/8 | 0-120 | Connecting Hooks, Emergency Stop, Handles, On/Off Switch, Package Stop, Sensor | 0000000 | 0000000000 |
Roller | ||||
|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Each | |
1 1/2" Dia. Zinc-Plated Steel Roller—1/2" Round Axle | ||||
| 30" | 28 15/32" | 16 | 0000000 | 000000 |
| Motor Enclosure Type | Power, hp | Each | |
| Totally Enclosed Nonventilated (TENV) | 1/8 | 0000000 | 0000000 |
| Features | Each | |
| On/Off Switch | 0000000 | 0000000 |
| Features | Each | |
| Emergency Stop | 0000000 | 0000000 |
| Max. Sensing Distance | Each | |
| 2" | 0000000 | 0000000 |