Mounting Rods with Clamp for Conveyors
A clamp at the end of the rod grips conveyor guides or other rods. Mount rods with brackets and connectors to create support arms.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes.
Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor. Instead of using bolts, tighten the clamps on style F around a guide rail by twisting the rod into the clamp.
For technical drawings and 3-D models, click on a part number.
| Lg. | Rod Dia. | For Rod Dia. | For Number of Lines | Material | Clamp Material | Includes | Rod Shape | Each | ||
Hollow | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A | 5 1/2" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | Round | 00000000 | 000000 |
| A | 7 1/2" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | Round | 00000000 | 00000 |
| A | 11 1/2" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | Round | 00000000 | 00000 |
Solid | ||||||||||
| A | 3" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| A | 4" | 12mm | 12mm | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| A | 9" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| A | 15" | 1/2" | 1/2" | 1 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| B | 4" | 12mm | 12mm | 2 | Stainless Steel | Plastic | __ | Round | 00000000 | 00000 |
| Lg. | Rod Dia. | For Channel Wd. | For Number of Lines | Material | Clamp Material | Includes | Each | ||
Hollow | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | 3 1/2" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 000000 |
| C | 5" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| C | 7" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| D | 5" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| D | 7 1/2" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
| D | 11 1/2" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | Black Plastic End Cap | 00000000 | 00000 |
Solid | |||||||||
| D | 3" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| D | 9" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| D | 15" | 1/2" | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| E | 5" | 12mm | 0.67" | 1 | Stainless Steel | Plastic | __ | 0000000 | 0000 |
| E | 5" | 14mm | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| E | 5" | 16mm | 0.67" | 1 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
| F | 3" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| F | 5" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| F | 7" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| F | 10" | 1/2" | 0.67" | 1 | Stainless Steel | Stainless Steel | __ | 00000000 | 00000 |
| G | 4" | 1/2" | 0.67" | 1 | Stainless Steel | Aluminum | Black Plastic End Cap | 0000000 | 00000 |
| G | 6" | 1/2" | 0.67" | 1 | Stainless Steel | Aluminum | Black Plastic End Cap | 0000000 | 00000 |
| G | 8" | 1/2" | 0.67" | 1 | Stainless Steel | Aluminum | Black Plastic End Cap | 0000000 | 00000 |
| H | 4" | 12mm | 0.67" | 2 | Stainless Steel | Plastic | __ | 00000000 | 00000 |
Mounting Rods for Conveyors
Use brackets and connectors to create vertical and horizontal support arms.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes. Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor.
Stainless steel mounting rods are the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
| Lg. | Rod Dia. | Material | Includes | Each | ||
Hollow | ||||||
|---|---|---|---|---|---|---|
| A | 4" | 15mm | Stainless Steel | __ | 00000000 | 000000 |
| A | 6" | 1/2" | Aluminum | __ | 00000000 | 0000 |
| A | 6" | 1/2" | Stainless Steel | Black Plastic End Cap | 0000000 | 00000 |
| A | 8" | 15mm | Stainless Steel | __ | 00000000 | 00000 |
| A | 9" | 1/2" | Stainless Steel | Black Plastic End Cap | 0000000 | 00000 |
| A | 9" | 5/8" | Stainless Steel | Black Plastic End Cap | 00000000 | 00000 |
| A | 12" | 1/2" | Aluminum | __ | 00000000 | 0000 |
| A | 12" | 1/2" | Stainless Steel | Black Plastic End Cap | 0000000 | 00000 |
| A | 12" | 5/8" | Stainless Steel | Black Plastic End Cap | 00000000 | 00000 |
| A | 12" | 15mm | Stainless Steel | __ | 00000000 | 00000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Size | Lg. | Gender | Material | Includes | Each | ||
Hollow | |||||||||
| A | 18" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | Black Plastic End Cap | 00000000 | 000000 |
Solid | |||||||||
| A | 3" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 4" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 5" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 6" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 8" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 8" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 10" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 10" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 12" | 1/2" | 5/16"-18 | 5/8" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 12" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 15" | 1/2" | 5/16"-18 | 0.89" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 16" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 24" | 1/2" | 5/16"-18 | 0.89" | Female | Stainless Steel | __ | 00000000 | 00000 |
Mounting Rods with Bracket Base for Conveyors
These rods have a bracket on the base so they're ready to mount.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes. Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor.
Style A and C rods stick out vertically from the bracket. Style B rods stick out horizontally from the bracket.
For technical drawings and 3-D models, click on a part number.
Bracket | Mounting Slot | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Wd. | Ht. | Material | Bracket Material | Mounting Fasteners Included | For Slot Wd. | Wd. | Ht. | Mounting Hole Dia. | Includes | Each | ||
Hollow | ||||||||||||||
| A | 4 1/2" | 1/2" | 2 3/8" | __ | Stainless Steel | Plastic | No | __ | __ | __ | 1/4" | __ | 00000000 | 000000 |
| A | 8" | 1/2" | 2 3/8" | __ | Stainless Steel | Plastic | No | __ | __ | __ | 1/4" | __ | 00000000 | 00000 |
Solid | ||||||||||||||
| B | 1 1/2" | 12mm | 1 1/2" | __ | Steel | Steel | No | __ | __ | __ | 5mm | __ | 0000000 | 00000 |
| B | 2" | 15mm | 1 3/4" | __ | Steel | Steel | No | __ | __ | __ | 6mm | __ | 0000000 | 00000 |
| C | 4" | 1/2" | 2" | 1 1/2" | Stainless Steel | Aluminum | Yes | 5/8" | 1/4" | 1 1/8" | __ | Black Plastic End Cap | 0000000 | 00000 |
| C | 6" | 1/2" | 2" | 1 1/2" | Stainless Steel | Aluminum | Yes | 5/8" | 1/4" | 1 1/8" | __ | Black Plastic End Cap | 0000000 | 00000 |
| C | 8" | 1/2" | 2" | 1 1/2" | Stainless Steel | Aluminum | Yes | 5/8" | 1/4" | 1 1/8" | __ | Black Plastic End Cap | 0000000 | 00000 |
Graduated Mounting Rods for Conveyors
Graduated in 1/8" or 1 mm increments, these rods make it easy to align multiple brackets during installation.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod. Solid rods are sturdier than hollow rods, so they are less likely to be knocked out of place by heavy objects on your conveyor.
For technical drawings and 3-D models, click on a part number.
Thread | 1/2" Rod Dia. | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Graduation Marks (Numeric Increments) | Size | Lg. | Gender | Material | Each | |
Solid | |||||||
| 3" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 000000 |
| 5" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 8" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 10" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 12" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 15" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 18" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 24" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
Pivoting Mounting Rods for Conveyors
The pivoting joint on these rods makes angle mounting easy.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Range of Motion | Size | Lg. | Gender | Threading | Material | Each | |
Solid | |||||||||
| 3" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 000000 |
| 4" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 5" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 6" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 7" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 8" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 9" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 10" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
Mounting Rods with Sensor Holder for Conveyors
Use the hole at the end of these rods to attach sensors and accessories without clamps. Mount rods with brackets and connectors to create vertical and horizontal support arms.
For technical drawings and 3-D models, click on a part number.
| Lg. | Rod Dia. | For Sensor OD | Material | Each | |
Solid | |||||
|---|---|---|---|---|---|
| 5" | 1/2" | 1/4" | Stainless Steel | 00000000 | 000000 |
Graduated Pivoting Mounting Rods for Conveyors
To make aligning multiple brackets during installation easy, these rods have 1/8” graduation marks. They also have a pivoting joint, so you can adjust the angle of your mount.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Range of Motion | Size | Lg. | Gender | Threading | Material | Each | |
Solid | |||||||||
| 3" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 000000 |
| 4" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 5" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 6" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 7" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 8" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 9" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 10" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
Modular Mini Chain Belt Conveyors
Build a mini conveyor in any shape you need. These conveyors have curved, straight, incline, and decline runs that you can quickly join together with the included brackets. They're often used in areas with limited floor space and applications that require frequent layout changes. To customize your conveyor, add on components, such as package stops and merge guides, with the built-in T-slots on the side. T-slot bolts are sold separately. These conveyors come with guides installed.
You'll need a drive assembly, an idler assembly, and a belt to complete your conveyor. To determine the belt length you need, multiply your conveyor’s length by 2.1. If you need a belt longer than what’s available, you can connect multiple together. Use a belt installation tool (sold separately) to pull out the pin, then line up two ends and push the pin in with the tool to connect them. You can also shorten a belt using the same tool.
Maximum run length is 70 ft. with two 90° curves. Adding more curved conveyors will reduce the run length.
For technical drawings and 3-D models, click on a part number.
Guide mounts give you more control over the position of guide rails than the ones installed on each conveyor section. In addition to adjusting your guide rail in and out, these mounts also let you adjust the height of the guide rail.
Style A mounts have two T-slot frame connections, so they’re more stable than Style B mounts for more impact resistance and less movement when the conveyor vibrates.
Style B mounts have one T-slot frame connection. They have less impact resistance than Style A mounts.