Belting for Slider-Bed Conveyors
A low-friction bottom surface allows belting to slide along slider-bed conveyors.
Nylon has a hard top cover that’s good for accumulation applications where products need to remain in a fixed position while the belt is moving.
For Lace No. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | For Min. Pulley Dia. | Max. Belt Tension, PIW | Construction | Max. Temp., °F | Quick-Install Hook-Style | Hammer-On Hook-Style | 2" Wd. Per Ft. | 4" Wd. Per Ft. | 6" Wd. Per Ft. | 8" Wd. Per Ft. | 10" Wd. Per Ft. | 12" Wd. Per Ft. | 18" Wd. Per Ft. | 24" Wd. Per Ft. | |
| 0.120" | 2" | 50 | 4 Ply | 250° | 1SP | 7 | 0000000 | ||||||||
Rough-Top Belting for Slider-Bed Conveyors
The textured surface grips packages and cartons to prevent material from slipping when traveling on inclines and declines. A low-friction bottom surface allows belting to glide along the bed of the conveyor. Use belting with hammer-on hook-style lacing or quick-install hook-style lacing.
Note: The top surface of the belt ends should be removed with a conveyor belt shaver or skiver before installing lacing. Recommended lacing is based on the thickness of the belt after removing the top surface.
SBR has good impact resistance and an excellent grip.
For technical drawings and 3-D models, click on a part number.
For Lace No. | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | For Min. Pulley Dia. | Max. Belt Tension, PIW | Construction | Max. Temp., °F | Quick-Install Hook-Style | Hammer-On Hook-Style | 2" Wd. Per Ft. | 3" Wd. Per Ft. | 4" Wd. Per Ft. | 6" Wd. Per Ft. | 8" Wd. Per Ft. | 10" Wd. Per Ft. | 12" Wd. Per Ft. | 18" Wd. Per Ft. | 24" Wd. Per Ft. | |
Beige SBR Rubber | ||||||||||||||||
| 0.265" | 3" | 200 | 3 Ply | 250° | 2 | 7 | 000000 | |||||||||
Belting for Roller-Bed Conveyors
This belting has a tough cover on the bottom to grip rollers.
Nylon belting has a hard top cover that’s good for accumulation applications where products need to remain in a fixed position while the belt is moving.
For technical drawings and 3-D models, click on a part number.
| Thick. | For Min. Pulley Dia. | Max. Belt Tension, PIW | Construction | Max. Temp., °F | For Quick-Install Hook-Style Lace No. | 2" Wd. Per Ft. | 4" Wd. Per Ft. | 6" Wd. Per Ft. | 8" Wd. Per Ft. | 10" Wd. Per Ft. | 12" Wd. Per Ft. | 24" Wd. Per Ft. | 30" Wd. Per Ft. | 36" Wd. Per Ft. | 48" Wd. Per Ft. | |
| 0.120" | 2" | 50 | 4 Ply | 250° | 1SP | 0000000 |
Sprockets for Conveyor Chain Belts
Sprockets drive belting to keep it running smoothly.
For technical drawings and 3-D models, click on a part number.
