Quick-Install Hook-Style Lacing
The hooks on this lacing are staggered for a strong, yet low-profile connection. Also known as clipper lacing, use a lacer to quickly clinch hooks into belts.
Note: Two laces are required for each joint.
Long-leg hooks hold more belt fibers than standard point hooks, which prevents the lacing from pulling out once installed.
Stainless steel lacing is more corrosion resistant than steel lacing.
Standard cardboard sheet lacing is for use on flat and troughed conveyors.
Welded metal bar lacing is more durable and easier to install than cardboard sheet lacing. Each hook is welded to the steel bar. Use on flat conveyors.
For technical drawings and 3-D models, click on a part number.
Standard Cardboard Sheet
Welded Metal Bar
Standard Point
Long Leg (LL)
Short Point (SP)
Long Leg, Short Point (LL, SP)
Hook | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Belt Wd. | For Belt Thick. | Lace Number | Style | Wire Dia. | For Min. Pulley Dia. | Connecting Pins Included | Pin Material | Magnetic Properties | Pkg. Qty. | Pkg. | |
Standard Cardboard Sheet Lacing | |||||||||||
Galvanized Steel | |||||||||||
| 12" | 0.030"-0.063" | 25 | Standard Point | 0.025" | 15/16" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 000000 |
| 12" | 0.125"-0.156" | 1 | Standard Point | 0.04" | 2" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.125"-0.156" | 2SP | Short Point (SP) | 0.054" | 2" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.156"-0.187" | 2 | Standard Point | 0.054" | 2" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.187"-0.219" | 3 | Standard Point | 0.054" | 3" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.219"-0.250" | 4 | Standard Point | 0.054" | 4" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.250"-0.281" | 4 1/2 | Standard Point | 0.054" | 4" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.281"-0.313" | 5 | Standard Point | 0.054" | 5" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.313"-0.343" | 6 | Standard Point | 0.054" | 6" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.343"-0.390" | 7 | Standard Point | 0.054" | 7" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 00000 |
316 Stainless Steel | |||||||||||
| 12" | 0.030"-0.063" | 25 | Standard Point | 0.025" | 15/16" | Yes | Nylon-Coated 18-8 Stainless Steel | Nonmagnetic | 12 | 0000000 | 00000 |
| 12" | 0.063"-0.093" | 36SP | Short Point (SP) | 0.036" | 2" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.063"-0.093" | 36LLSP | Long Leg (LL), Short Point (SP) | 0.036" | 3" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.093"-0.125" | 36 | Standard Point | 0.036" | 2" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.093"-0.125" | 36LL | Long Leg (LL) | 0.036" | 3" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
430 Stainless Steel  | |||||||||||
| 12" | 0.125"-0.156" | 1 | Standard Point | 0.04" | 2" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.125"-0.156" | 2SP | Short Point (SP) | 0.054" | 2" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.156"-0.187" | 2 | Standard Point | 0.054" | 2" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.187"-0.219" | 3 | Standard Point | 0.054" | 3" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.219"-0.250" | 4 | Standard Point | 0.054" | 4" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.250"-0.281" | 4 1/2 | Standard Point | 0.054" | 4" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 000000 |
| 12" | 0.281"-0.313" | 5 | Standard Point | 0.054" | 5" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 000000 |
| 12" | 0.313"-0.343" | 6 | Standard Point | 0.054" | 6" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 000000 |
| 12" | 0.343"-0.390" | 7 | Standard Point | 0.054" | 7" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 000000 |
Welded Metal Bar Lacing | |||||||||||
316 Stainless Steel | |||||||||||
| 12" | 0.063"-0.093" | UCM36SP | Short Point (SP) | 0.036" | 2" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.063"-0.093" | UCM36LLSP | Long Leg (LL), Short Point (SP) | 0.036" | 3" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.063"-0.125" | UX1SP | Short Point (SP) | 0.04" | 2" | No | __ | Nonmagnetic | 12 | 0000000 | 00000 |
| 12" | 0.093"-0.125" | UCM36 | Standard Point | 0.036" | 2" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.093"-0.125" | UCM36LL | Long Leg (LL) | 0.036" | 3" | No | __ | Nonmagnetic | 12 | 0000000 | 000000 |
| 12" | 0.125"-0.156" | UX1 | Standard Point | 0.04" | 2" | No | __ | Nonmagnetic | 12 | 0000000 | 00000 |
430 Stainless Steel | |||||||||||
| 12" | 0.125"-0.156" | U3-1 | Standard Point | 0.054" | 3 1/2" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.156"-0.187" | U3-2 | Standard Point | 0.054" | 3 1/2" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.187"-0.219" | U3 | Standard Point | 0.054" | 3 1/2" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.219"-0.250" | U4 | Standard Point | 0.054" | 4" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.281"-0.313" | U5 | Standard Point | 0.054" | 5" | No | __ | Magnetic | 12 | 0000000 | 00000 |
Steel | |||||||||||
| 12" | 0.125"-0.156" | U3-1 | Standard Point | 0.054" | 3 1/2" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.156"-0.187" | U3-2 | Standard Point | 0.054" | 3 1/2" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.187"-0.219" | U3 | Standard Point | 0.054" | 3 1/2" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.219"-0.250" | U4 | Standard Point | 0.054" | 4" | No | __ | Magnetic | 12 | 0000000 | 00000 |
| 12" | 0.281"-0.313" | U5 | Standard Point | 0.054" | 5" | No | __ | Magnetic | 12 | 0000000 | 00000 |
Connecting Pins
| For Lace No. | Lg. | Pin OD | Magnetic Properties | Pkg. Qty. | Pkg. | |
Nylon-Coated Steel | ||||||
|---|---|---|---|---|---|---|
| 25, 36, 1, UX1, UCM36, 1LL, 1SP, 1XSP, 25LL, 25LP, 36LL, 36LLSP, 36SP, UCM36LL, UCM36LLSP, UCM36SP, UX1SP | 12" | 0.065" | Nonmagnetic | 12 | 0000000 | 000000 |
| 2, 3, U3-1, U3-2, U3, 2SP | 12" | 0.093" | Nonmagnetic | 12 | 0000000 | 00000 |
| 4, U4 | 12" | 0.109" | Nonmagnetic | 12 | 0000000 | 00000 |
| 4 1/2, 5, U5 | 12" | 0.125" | Nonmagnetic | 12 | 0000000 | 00000 |
| 6, 7, U6, U7 | 12" | 0.156" | Nonmagnetic | 12 | 0000000 | 00000 |
Nylon-Coated 18-8 Stainless Steel | ||||||
| 25, 36, 1, UX1, UCM36, 1LL, 1SP, 1XSP, 25LL, 25LP, 36LL, 36LLSP, 36SP, UCM36LL, UCM36LLSP, UCM36SP, UX1SP | 12" | 0.065" | Nonmagnetic | 12 | 0000000 | 00000 |
| 2, 3, U3-1, U3-2, U3, 2SP | 12" | 0.093" | Nonmagnetic | 12 | 0000000 | 00000 |
| 4, U4 | 12" | 0.109" | Nonmagnetic | 12 | 0000000 | 00000 |
| 4 1/2, 5, U5 | 12" | 0.125" | Nonmagnetic | 12 | 0000000 | 00000 |
| 6, 7, U6, U7 | 12" | 0.156" | Nonmagnetic | 12 | 0000000 | 00000 |
Cut-to-Length Connecting Pins
Nylon-Coated Steel | Nylon-Coated 18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Per Ft. | Per Ft. | ||||||||
| For Lace No. | Max. Continuous Lg., ft. | Pin OD | Magnetic Properties | 1-99 | 100-Up | 1-99 | 100-Up | ||
| 25, 36, 1, UX1, UCM36, 1LL, 1SP, 1XSP, 25LL, 25LP, 36LL, 36LLSP, 36SP, UCM36LL, UCM36LLSP, UCM36SP, UX1SP | 100 | 0.065" | Nonmagnetic | 0000000 | 00000 | 00000 | 0000000 | 00000 | 00000 |
| 2, 3, U3-1, U3-2, U3, 2SP | 100 | 0.093" | Nonmagnetic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
| 4, U4 | 100 | 0.109" | Nonmagnetic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
| 4 1/2, 5, U5 | 100 | 0.125" | Nonmagnetic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
| 6, 7, U6, U7 | 100 | 0.156" | Nonmagnetic | 0000000 | 0000 | 0000 | 0000000 | 0000 | 0000 |
Hammer-On Hook-Style Lacing
This low-profile lacing requires only a hammer to install so it's good for repairs and tight spaces. Also known as alligator lacing, the lacing teeth bite into the belt to hold. The one-piece design runs smoothly over idler rollers without catching on conveyed products. Lacing can be cut to size with wire-cutting pliers.
Stainless steel is more corrosion resistant than galvanized steel.
For technical drawings and 3-D models, click on a part number.
| For Belt Wd. | For Belt Thick. | For Min. Pulley Dia. | Connecting Pins Included | Pin Material | Magnetic Properties | Includes | Pkg. Qty. | Pkg. | |
Galvanized Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
No. 00 Lacing | |||||||||
| 12" | 0.030"-0.060" | 1" | Yes | Steel | Magnetic | Installation Gauge Pin | 4 | 00000000 | 000000 |
No. 1A Lacing | |||||||||
| 12" | 0.060"-0.090" | 1 1/2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 7 Lacing | |||||||||
| 12" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 15 Lacing | |||||||||
| 12" | 0.130"-0.160" | 2 1/2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 20 Lacing | |||||||||
| 12" | 0.160"-0.190" | 3" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 25 Lacing | |||||||||
| 12" | 0.190"-0.220" | 4" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 27 Lacing | |||||||||
| 12" | 0.220"-0.280" | 5" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 35 Lacing | |||||||||
| 12" | 0.280"-0.310" | 7" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
No. 1S Lacing | |||||||||
| 12" | 0.060"-0.090" | 1 1/2" | Yes | 18-8 Stainless Steel | Nonmagnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
No. 7S Lacing | |||||||||
| 12" | 0.090"-0.140" | 2" | Yes | 18-8 Stainless Steel | Nonmagnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
No. 15S Lacing | |||||||||
| 12" | 0.130"-0.160" | 2 1/2" | Yes | 18-8 Stainless Steel | Nonmagnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
No. 20S Lacing | |||||||||
| 12" | 0.160"-0.190" | 3" | Yes | 18-8 Stainless Steel | Nonmagnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
Connecting Pins—Galvanized Steel
| For Belt Wd. | Magnetic Properties | Pkg. Qty. | Pkg. | |
For No. 00 Lacing | ||||
|---|---|---|---|---|
| 12" | Nonmagnetic | 10 | 00000000 | 000000 |
For No. 1A, 7 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 15 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 20 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 25, 27 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 35 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
Connecting Pins—316 Stainless Steel
| For Belt Wd. | Magnetic Properties | Pkg. Qty. | Pkg. | |
For No. 1S, 7S Lacing | ||||
|---|---|---|---|---|
| 12" | Nonmagnetic | 10 | 00000000 | 000000 |
Connecting Pins for Hammer-On Hook-Style Lacing
For technical drawings and 3-D models, click on a part number.
| For Belt Wd. | Magnetic Properties | Pkg. Qty. | Pkg. | |
Galvanized Steel | ||||
|---|---|---|---|---|
For No. 00 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 000000 |
For No. 1A, 7 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 15 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 20 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 25, 27 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
For No. 35 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
316 Stainless Steel | ||||
For No. 1S, 7S Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 00000 |
Staple-Style Lacing
Also known as alligator lacing, this strong, impact-resistant lacing uses a staple driver and installation guide to secure staples.
Stainless steel lacing is more corrosion resistant than steel lacing.
For technical drawings and 3-D models, click on a part number.
| For Belt Wd. | For Belt Thick. | For Min. Pulley Dia. | Connecting Pins Included | Pin Material | Magnetic Properties | Pkg. Qty. | Pkg. | |
Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
No. 62 Lacing | ||||||||
| 12" | 0.063"-0.125" | 2" | Yes | Nylon-Coated Steel | Magnetic | 4 | 00000000 | 0000000 |
No. 125 Lacing | ||||||||
| 12" | 0.125"-0.188" | 3" | Yes | Nylon-Coated Steel | Magnetic | 4 | 00000000 | 000000 |
No. 187 Lacing | ||||||||
| 12" | 0.188"-0.250" | 4" | Yes | Nylon-Coated Steel | Magnetic | 4 | 00000000 | 000000 |
316 Stainless Steel | ||||||||
No. 62 Lacing | ||||||||
| 12" | 0.063"-0.125" | 2" | Yes | Nylon-Coated 18-8 Stainless Steel | Nonmagnetic | 4 | 00000000 | 000000 |
No. 125 Lacing | ||||||||
| 12" | 0.125"-0.188" | 3" | Yes | Nylon-Coated 18-8 Stainless Steel | Nonmagnetic | 4 | 00000000 | 000000 |
No. 187 Lacing | ||||||||
| 12" | 0.188"-0.250" | 4" | Yes | Nylon-Coated 18-8 Stainless Steel | Nonmagnetic | 4 | 00000000 | 000000 |
Connecting Pins
10 ft. Lg. | 100 ft. Lg. | ||||
|---|---|---|---|---|---|
| For Lace Number | Magnetic Properties | Each | Each | ||
Nylon-Coated Steel | |||||
| 62 | Magnetic | 00000000 | 000000 | 00000000 | 0000000 |
| 125 | Magnetic | 00000000 | 00000 | 00000000 | 000000 |
| 187 | Magnetic | 00000000 | 00000 | 00000000 | 000000 |
Nylon-Coated 18-8 Stainless Steel | |||||
| 62 | Nonmagnetic | 00000000 | 00000 | 00000000 | 000000 |
| 125 | Nonmagnetic | 00000000 | 00000 | 00000000 | 000000 |
| 187 | Nonmagnetic | 00000000 | 000000 | 00000000 | 000000 |
Bolt-On Lacing
Our heaviest duty lacing uses bolts and nuts to repair and extend thick belts. Installation tools (sold separately) are required for proper installation.
For technical drawings and 3-D models, click on a part number.
Installation Tools for Bolt-On Lacing
Templates serve as guides when punching holes and cutting belt ends.
Templates
| For Belt Wd. | Each | |
| 12" | 0000000 | 000000 |