Sprockets for Conveyor Chain Belts
Sprockets drive belting to keep it running smoothly.
Sprockets with two-piece construction are easier to install.
For technical drawings and 3-D models, click on a part number.
| For Belt Series Number | For Shaft Dia. | Number of Teeth | OD | Wd. | Material | Color | Temp. Range, °F | Each | |
| 810, 815 | 0.80" | 21 | 5.12" | 1.67" | Iron | __ | 0° to 480° | 0000000 | 0000000 |
| 810, 815 | 0.80" | 23 | 5.59" | 1.67" | Iron | __ | 0° to 480° | 0000000 | 000000 |
| 810, 815 | 0.80" | 25 | 6.10" | 1.67" | Iron | __ | 0° to 480° | 0000000 | 000000 |
| 1701 | 0.85" | 8 | 5.14" | 1.67" | Polyamide Plastic | Gray | 32° to 190° | 0000000 | 00000 |
| 1701 | 0.85" | 10 | 6.37" | 1.67" | Polyamide Plastic | Gray | 32° to 190° | 0000000 | 00000 |
| 3200 | 0.85" | 8 | 5.30" | 1.70" | Polyamide Plastic | Beige | -40° to 245° | 0000000 | 00000 |
| 3200 | 0.85" | 12 | 8.00" | 1.70" | Polyamide Plastic | Beige | -40° to 245° | 0000000 | 00000 |
| For Belt Series Number | For Shaft Dia. | Number of Teeth | OD | Wd. | Material | Color | Screw Material | Nut Material | Temp. Range, °F | Each | |
| 820 | 1.00" | 21 | 5.08" | 2.09" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 820 | 1.00" | 23 | 5.59" | 2.09" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 820 | 1.00" | 25 | 6.06" | 2.09" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 820 | 1.25" | 21 | 5.08" | 2.09" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 820 | 1.25" | 23 | 5.59" | 2.09" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 820 | 1.25" | 25 | 6.06" | 2.09" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 821 | 1.20" | 25 | 6.07" | 3.16" | Polyamide Plastic | White | Stainless Steel | Stainless Steel | 32° to 190° | 0000000 | 000000 |
| 810, 815 | 0.85" | 21 | 5.12" | 1.67" | Polyamide Plastic | Gray | Stainless Steel | Stainless Steel | 32° to 190° | 0000000 | 00000 |
| 810, 815 | 0.85" | 23 | 5.59" | 1.67" | Polyamide Plastic | White | Stainless Steel | Stainless Steel | 32° to 190° | 0000000 | 00000 |
| 810, 815 | 0.85" | 25 | 6.07" | 1.67" | Polyamide Plastic | Gray | Stainless Steel | Stainless Steel | 32° to 190° | 0000000 | 000000 |
| 880 | 1.00" | 12 | 5.80" | 2.30" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 00000 |
| 880 | 1.25" | 12 | 5.80" | 2.30" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 00000 |
| 882 | 1.00" | 12 | 5.87" | 2.30" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
| 882 | 1.25" | 12 | 5.87" | 2.30" | Polyamide Plastic | Black | Stainless Steel | Nickel-Plated Brass | 32° to 190° | 00000000 | 000000 |
Sprockets for Food Industry Cut-Resistant Conveyor Belting
Choose these sprockets when you need to expand your Ammeraal Beltech MPB conveyor line or replace its worn sprockets. Made of strong, durable polyamide, they withstand chemicals and a wide range of temperatures. All are FDA compliant for direct contact with food.
Sprockets with eight teeth leave a smaller gap between belt plates then those with ten teeth, so food is less likely to fall through.
Sprockets with ten teeth allow belts to run smoother than those with eight teeth, which prolongs the life of the belts. They can also handle heavier loads. The gaps between the belt plates, however, will be larger than those with eight teeth, so food may fall through.
For technical drawings and 3-D models, click on a part number.