Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Easy-Position Beam Clamps for Pipe, Tube, and Conduit
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
Install clamp-on clamps by tightening the clamping screw. A threaded hole on the side of the clamp supports an additional hanger or routing ring.
Install press-fit clamps by lightly hammering them onto the beam.
For technical drawings and 3-D models, click on a part number.
For OD | For Beam Thick. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mount Type | For Beam Shape | Inch | Metric, mm | For Pipe Size  | Min. | Max. | Capacity, lbs. | Range of Motion | Threaded Hole Size | Throat Dp. | Surface to Pipe Center | Lg. | Wd. | Ht. | Each | |
Bottom | ||||||||||||||||
Zinc-Plated Steel | ||||||||||||||||
| Clamp On | Flat; Tapered | 11/16"-13/16" | 17-21 | 3/8, 1/2 | __ | 1/2" | 50 | 360° | 1/4"-20 | 1/2" | 1 1/4" | 1 3/4" | 1" | 1 1/2" | 00000000 | 00000 |
| Clamp On | Flat; Tapered | 15/16"-1" | 24-25 | 3/4 | __ | 1/2" | 50 | 360° | 1/4"-20 | 1/2" | 1 7/16" | 1 3/4" | 1" | 1 1/2" | 00000000 | 0000 |
| Clamp On | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | __ | 1/2" | 60 | 360° | 1/4"-20 | 1/2" | 1 1/2" | 1 3/4" | 1" | 1 1/2" | 00000000 | 0000 |
| Clamp On | Flat; Tapered | 1 1/2" | 38 | __ | __ | 1/2" | 75 | 360° | 1/4"-20 | 1/2" | 1 11/16" | 1 3/4" | 1" | 1 1/2" | 00000000 | 0000 |
| Clamp On | Flat; Tapered | 1 11/16" | 43 | 1 1/4 | __ | 1/2" | 75 | 360° | 1/4"-20 | 1/2" | 1 13/16" | 1 3/4" | 1" | 1 1/2" | 00000000 | 0000 |
| Clamp On | Flat; Tapered | 1 7/8" | 48 | 1 1/2 | __ | 1/2" | 75 | 360° | 1/4"-20 | 1/2" | 2" | 1 3/4" | 1" | 1 1/2" | 00000000 | 0000 |
| Clamp On | Flat; Tapered | 2 1/4"-2 3/8" | 57-60 | 2 | __ | 1/2" | 75 | 360° | 1/4"-20 | 1/2" | 2 1/4" | 1 3/4" | 1" | 1 1/2" | 00000000 | 0000 |
Bottom and Top Mount | ||||||||||||||||
Zinc-Plated Steel | ||||||||||||||||
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 1/8" | 1/4" | 75 | 360° | __ | 1" | 3/4" | 1 3/8" | 1 3/4" | 3" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 5/16" | 1/2" | 75 | 360° | __ | 1" | 3/4" | 1 3/8" | 1 3/4" | 3 1/4" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 9/16" | 3/4" | 75 | 360° | __ | 1" | 3/4" | 1 1/2" | 1 3/4" | 3 1/2" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 3/4"-1" | 19-25 | 1/2 | 13/16" | 1 1/8" | 75 | 360° | __ | 1" | 3/4" | 1 1/2" | 1 3/4" | 3 3/4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | 1/8" | 1/4" | 75 | 360° | __ | 1" | 1" | 1 3/8" | 1 3/4" | 3 1/2" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | 5/16" | 1/2" | 75 | 360° | __ | 1" | 1" | 1 3/8" | 1 3/4" | 3 3/4" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/16"-1 5/16" | 30-33 | 1 | 9/16" | 3/4" | 75 | 360° | __ | 1" | 1" | 1 1/2" | 1 3/4" | 4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 5/16"-1 5/8" | 33-41 | 1 1/4 | 1/8" | 1/4" | 75 | 360° | __ | 1" | 1" | 1 3/8" | 1 3/4" | 3 3/4" | 00000000 | 0000 |
| Press Fit | Flat; Tapered | 1 5/16"-1 5/8" | 33-41 | 1 1/4 | 5/16" | 1/2" | 75 | 360° | __ | 1" | 1" | 1 3/8" | 1 3/4" | 4" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 3/4"-1 7/8" | 44-48 | 1 1/2 | 5/16" | 1/2" | 75 | 360° | __ | 1" | 1 1/4" | 1 3/8" | 1 3/4" | 4 1/4" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 7/8"-2 3/8" | 48-60 | 2 | 5/16" | 1/2" | 75 | 360° | __ | 1" | 1 1/2" | 1 3/8" | 1 3/4" | 5" | 0000000 | 0000 |
| Press Fit | Flat; Tapered | 1 7/8"-2 3/8" | 48-60 | 2 | 9/16" | 3/4" | 75 | 360° | __ | 1" | 1 1/2" | 1 1/2" | 1 3/4" | 5 1/4" | 00000000 | 0000 |
Sloped Beam Clamps for Threaded Rod
These clamps rotate and pivot to ensure the rod hangs straight, even on sloped beams. Clamps are zinc-plated steel or iron for mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| For Beam Shape | For Thread Size | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Nut Style | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Bottom Mount | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Steel | ||||||||||||
| Angled | 1/4"-20 | 1/4" | 160 | Clamp On | __ | 3/4" | 2 3/8" | 7/8" | 2 3/8" | No | 0000000 | 000000 |
| Angled | 3/8"-16 | 1/4" | 200 | Clamp On | __ | 3/4" | 2 3/8" | 7/8" | 2 3/8" | No | 0000000 | 00000 |
| Flat, Tapered | 3/8"-16 | 11/16" | 330 | Clamp On | Locknut | 1 1/16" | 2 1/16" | 2 1/16" | 3 1/8" | No | 0000000 | 00000 |
| Flat, Tapered | 3/8"-16, 1/2"-13 | 3/4" | 500 | Clamp On | __ | 1" | 2" | 1" | 3" | No | 0000000 | 00000 |
Bottom and Top Mount | ||||||||||||
Zinc-Plated Iron | ||||||||||||
| Flat, Tapered | 3/8"-16 | 3/4" | 540 | Clamp On | Locknut | 7/8" | 1 3/4" | 7/8" | 3 3/16" | No | 0000000 | 00000 |
Swivel Threaded-Rod-Mount Loop Hangers
These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling. To mount, screw threaded rod into the threaded hole on top of the hanger. The hanging height can be adjusted after material is installed.
Zinc-plated steel hangers have good corrosion resistance. Copper-plated steel hangers won't corrode copper material. PVC-coated steel hangers reduce wear on material.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | For Thread Size | Color | Cap., lbs. | Lg. | Wd. | Ht. | Thick. | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||||
| 13/16" | 21 | 1/2 | 3/8"-16 | __ | 400 | 1/2" | 5/8" | 3" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 10 | 0000000 | 000000 |
| 1 1/16" | 27 | 3/4 | 3/8"-16 | __ | 400 | 1 1/8" | 5/8" | 3 1/8" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 10 | 0000000 | 00000 |
| 1 5/16" | 33 | 1 | 3/8"-16 | __ | 400 | 1 7/16" | 5/8" | 3 3/8" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 10 | 0000000 | 00000 |
| 1 11/16" | 43 | 1 1/4 | 3/8"-16 | __ | 400 | 1 13/16" | 5/8" | 3 3/4" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 10 | 0000000 | 00000 |
| 1 7/8" | 48 | 1 1/2 | 3/8"-16 | __ | 400 | 2" | 5/8" | 4" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 10 | 0000000 | 00000 |
| 2 3/8" | 60 | 2 | 3/8"-16 | __ | 400 | 2 1/2" | 5/8" | 4 5/8" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 10 | 0000000 | 00000 |
| 2 7/8" | 73 | 2 1/2 | 1/2"-13 | __ | 600 | 3" | 3/4" | 5 1/2" | 3/32" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 1 | 0000000 | 0000 |
| 3 1/2" | 89 | 3 | 1/2"-13 | __ | 600 | 3 5/8" | 3/4" | 6 3/8" | 3/32" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 1 | 0000000 | 0000 |
| 4" | 102 | 3 1/2 | 1/2"-13 | __ | 600 | 4 1/8" | 1 1/8" | 6 1/2" | 1/16" | __ | FM Approved MSS-SP-58-2018 UL Listed | 1 | 0000000 | 00000 |
| 4 1/2" | 114 | 4 | 5/8"-11 | __ | 1,000 | 4 11/16" | 1 3/16" | 7 3/8" | 3/32" | __ | FM Approved MSS-SP-58-2018 UL Listed | 1 | 0000000 | 00000 |
| 6 5/8" | 168 | 6 | 1/2"-13 | __ | 1,250 | 6 13/16" | 1 1/8" | 10 1/8" | 1/16" | __ | FM Approved Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 UL Listed | 1 | 0000000 | 0000 |
Copper-Plated Steel | ||||||||||||||
| 5/8" | 16 | 1/4 | 3/8"-16 | __ | 400 | 3/4" | 5/8" | 3" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 10 | 0000000 | 00000 |
| 7/8" | 22 | 1/2 | 3/8"-16 | __ | 400 | 1" | 5/8" | 3" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 10 | 0000000 | 00000 |
| 1 1/8" | 29 | 3/4 | 3/8"-16 | __ | 400 | 1 1/4" | 5/8" | 3" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 10 | 0000000 | 00000 |
| 1 3/8" | 35 | 1 | 3/8"-16 | __ | 400 | 1 1/2" | 5/8" | 3 1/4" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 10 | 0000000 | 00000 |
| 1 5/8" | 41 | __ | 3/8"-16 | __ | 400 | 1 3/4" | 5/8" | 3 3/4" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 10 | 0000000 | 00000 |
| 2 1/8" | 54 | __ | 3/8"-16 | __ | 400 | 2 1/4" | 5/8" | 4 1/8" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
| 2 5/8" | 67 | __ | 3/8"-16 | __ | 600 | 2 3/4" | 3/4" | 4 3/4" | 1/16" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
| 3 1/8" | 79 | __ | 3/8"-16 | __ | 600 | 3 5/16" | 3/4" | 5 3/8" | 3/32" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
| 4 1/8" | 105 | 3 1/2 | 3/8"-16 | __ | 1,000 | 4 5/16" | 3/4" | 6 1/4" | 3/32" | __ | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
PVC-Coated Steel | ||||||||||||||
| 13/16" | 21 | 1/2 | 3/8"-16 | Black | 610 | 15/16" | 5/8" | 2 5/16" | 1/16" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
| 1 1/16" | 27 | 3/4 | 3/8"-16 | Black | 610 | 1 3/16" | 5/8" | 2 5/8" | 1/16" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
| 1 5/16" | 33 | 1 | 3/8"-16 | Black | 610 | 1 7/16" | 5/8" | 2 7/8" | 1/16" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 0000 |
| 1 11/16" | 43 | 1 1/4 | 3/8"-16 | Black | 610 | 1 13/16" | 5/8" | 3 7/16" | 1/16" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
| 1 7/8" | 48 | 1 1/2 | 3/8"-16 | Black | 610 | 2" | 5/8" | 3 11/16" | 1/16" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
| 2 3/8" | 60 | 2 | 3/8"-16 | Black | 610 | 2 1/2" | 5/8" | 4 3/16" | 1/8" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
| 2 7/8" | 73 | 2 1/2 | 1/2"-13 | Black | 970 | 3 1/16" | 3/4" | 5 5/16" | 1/8" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
| 3 1/2" | 89 | 3 | 1/2"-13 | Black | 970 | 3 11/16" | 3/4" | 6" | 1/8" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
| 4" | 102 | 3 1/2 | 1/2"-13 | Black | 970 | 4 3/16" | 3/4" | 6 1/2" | 1/8" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
| 4 1/2" | 114 | 4 | 5/8"-11 | Black | 1,250 | 4 3/4" | 3/4" | 7 1/8" | 1/8" | -30° to 200° | Fed. Spec. WW-H-171E, Type 10 MSS-SP-58-2009, Type 10 | 1 | 0000000 | 00000 |
Stainless Steel Threaded-Rod-Mount Loop Hangers
Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling. To mount, slide threaded rod into the unthreaded holes on top of the hanger and secure with a pair of nuts (sold separately). 316 stainless steel clamps have excellent corrosion and chemical resistance.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | For Thread Size | Cap., lbs. | Lg. | Wd. | Ht. | Thick. | Mounting Hole Dia. | No. of Nuts Required | Each | |
316 Stainless Steel | ||||||||||||
| 7/8" | 22 | 1/2 | 3/8"-16 | 610 | 1" | 1" | 2 5/16" | 1/16" | 7/16" | 2 | 0000000 | 00000 |
| 1" | 25 | __ | 3/8"-16 | 610 | 1 1/8" | 1" | 2 5/8" | 1/16" | 7/16" | 2 | 0000000 | 0000 |
| 1 3/8" | 35 | 1 | 3/8"-16 | 610 | 1 1/2" | 1" | 2 7/8" | 1/16" | 7/16" | 2 | 0000000 | 0000 |
| 1 5/8" | 41 | __ | 3/8"-16 | 610 | 1 3/4" | 1" | 3 7/16" | 1/16" | 7/16" | 2 | 0000000 | 0000 |
| 1 15/16" | 49 | 1 1/2 | 3/8"-16 | 610 | 2 1/16" | 1" | 3 11/16" | 1/16" | 7/16" | 2 | 0000000 | 00000 |
| 2 3/8" | 60 | 2 | 3/8"-16 | 610 | 2 5/8" | 1" | 4 3/16" | 1/8" | 7/16" | 2 | 0000000 | 00000 |
| 2 7/8" | 73 | 2 1/2 | 3/8"-16 | 970 | 3 1/8" | 1" | 5 5/16" | 1/8" | 9/16" | 2 | 0000000 | 00000 |
| 3 1/2" | 89 | 3 | 3/8"-16 | 970 | 3 3/4" | 1" | 6" | 1/8" | 9/16" | 2 | 0000000 | 00000 |
| 4" | 102 | 3 1/2 | 1/2"-13 | 970 | 4 1/4" | 1" | 6 1/2" | 1/8" | 9/16" | 2 | 0000000 | 00000 |
| 4 1/2" | 114 | 4 | 1/2"-13 | 1,250 | 4 3/4" | 1 1/4" | 7 1/8" | 1/8" | 11/16" | 2 | 0000000 | 00000 |
Suspension Beams for Threaded Rod
Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point. Beams are shaped to fit beneath corrugated roofing. They include a threaded rod anchor for supporting a single threaded rod. Add more threaded rod anchors to support additional threaded rod and customize your setup.
For technical drawings and 3-D models, click on a part number.
| For Joist-to-Joist Lg., ft. | Cap. with 1 Threaded Rod Anchor, lbs. | Cap. with 2 Threaded Rod Anchors, lbs. | For Thread Size | Threaded Rod Included | Color | Includes | Each | |
Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 4 | 1,000 | 2,000 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 0000000 |
| 5 | 1,000 | 2,000 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| 6 | 1,000 | 2,000 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| 7 | 1,000 | 1,800 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| 8 | 1,000 | 1,550 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| Threaded Rod Anchors | 0000000 | Each | 000000 |
Threaded Rod Eye Nuts
Add an eye nut to threaded rod to hang the rod from rings, hooks, and hangers.
Turnbuckle eye nuts have a swivel eye that allows height adjustment after installation.
Note: Capacity is for the eye nut only. Mounting surface and fastening hardware will affect the ultimate capacity.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | Threaded Hole Dp. | Cap., lbs. | Eye Dia. | Ctr. Ht. | Wd. | Ht. | Threaded Rod Included | Fasteners Required | Each | |
Iron | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Turnbuckle Eye Nut | ||||||||||
| 1/4"-20 | 1 1/4" | 225 | 7/32" | 2 1/2" | 1" | 2 11/16" | No | No | 000000 | 000000 |
| 3/8"-16 | 1 7/8" | 725 | 13/32" | 3 7/8" | 1 1/2" | 4 7/16" | No | No | 000000 | 00000 |
| 1/2"-13 | 1 13/16" | 725 | 13/32" | 3 7/8" | 1 1/2" | 4 7/16" | No | No | 000000 | 00000 |
| 5/8"-11 | 2 5/16" | 725 | 1/2" | 4 7/8" | 1 15/16" | 5 11/16" | No | No | 000000 | 00000 |