We will reply to your message within an hour.
More
This nonmagnetic aluminum conduit withstands damp and corrosive environments.
Join pieces of conduit.
Attach conduit to a knockout in an outlet box or enclosure.
Connect different sizes of conduit.
Ground conduit by running a ground wire through the attached lug.
Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.
Seal out moisture while reducing the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.
Join different sizes of conduit.
Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.
Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.
This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).
Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.
Connect different sizes and genders of conduit.
This is also known as PVC Schedule 40 conduit.
Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.
Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.
Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.
Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.
The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.
Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.
Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.
Create a connection point to route overhead service wire and cable from utility poles to electrical meters, bringing power to buildings.
Make tight bends in machine and equipment wiring.
Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.
Visually identify different runs of wire and cable in machine and equipment wiring.
Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.
Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.
Attach conduit and armored cable to a knockout in an outlet box or enclosure.
Protect fiber optic cable with this small-diameter conduit.
When used with liquid-tight fittings, this conduit seals out liquid. The steel core provides crush resistance, and the cover is UV light resistant.
The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.
These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.
The toughest liquid-tight flexible metal conduit we offer, this resists oil, chemicals, and extreme temperature fluctuations.
In addition to resisting oil, this conduit resists lubricants and grease.
Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.
Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.
Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.
Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.
These adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.
Transition between conduit sizes and types.
Transition between types of conduit.
Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.
Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.
Also known as Type A, this conduit meets the demands of continuous motion while sealing out liquid when used with liquid-tight fittings.
These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.
One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.
In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.
Support and protect conduit by mounting it to strut channel.