A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools.

When water is condensed out of a compressed air system, it contains oil from the compressor that makes disposal difficult. These separators use two-stage filtration to reduce oil content to below 20 parts per million.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Generate clean air for instrumentation and applications with critical air requirements.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Also known as inverted-bucket steam traps, these provide near-continuous discharge to accommodate high condensate levels.

Suitable for food, pharmaceutical, and other sanitary environments, these steam traps are made of 316 stainless steel with a Viton® fluoroelastomer O-ring to stand up to frequent washdowns with harsh cleaners and sanitizers.

When close to steam temperature, these traps—also called thermodynamic steam traps—release condensate from steam lines to save energy in food, pharmaceutical, and other sanitary environments.

Also known as thermostatic steam traps, these vent cool air and condensate to increase energy efficiency in your steam lines.

Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.