We will reply to your message within an hour.
These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.
Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.
Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.
Protect concrete from mild chemicals, salts, soaps, and detergents.
Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.
Hold back standing water. These coatings soak into the top layer of masonry to create a thick, waterproof seal rated up to 15 psi.
Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.
Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Able to withstand temperatures of up to 2000° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.
Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.
These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
Make items stand out under emergency lighting or in low-light environments.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Make your surface magnetic with this paint.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Create a washable writing surface.
Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.
Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings.
Increase paint’s ability to bond to hard, smooth surfaces, such as tile and metal.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.
Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.
Remove grease, oil, and dirt from your concrete floors.
Fill cracks in horizontal, vertical, and overhead concrete surfaces.
Fill cracks up to 10" deep on vertical and overhead surfaces.
Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.
Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.
Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.
Patch concrete floors, stairs, and walls with these compounds.
Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.
Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.
Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.
These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.
Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.
Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
For use when thickness will be less than 2", sand mixes consist of cement and sand.
For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.
Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.
Make castings and fill voids with these two-part pourable epoxies.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Seal joints and gaps in concrete.
The textured finish matches concrete surfaces.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install building materials such as wood and drywall with these general purpose adhesives.
Install vinyl and rubber treads on stairs with this adhesive.
Bond and repair nosing and stair treads with this thick, two-part epoxy.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Install foam insulation, drywall, and paneling with these adhesives.
Bond new concrete to old concrete, or use this adhesive as a primer on concrete surfaces.
When concrete is saturated or submerged in water, use these adhesives to form strong bonds.
These kits include adhesives, applicators, and mixer nozzles.
Permanently set threaded rods, studs, and rebar in concrete.
These adhesives maintain their strength at temperatures up to 250° F.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Pull off a small piece of putty and stick lightweight objects to a surface.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Even when used under water, these adhesives maintain their strength.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.