About Sanding Abrasives
More
Concrete Trowels
Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.
Style B trowels accept a handle (sold separately).
Concrete Floats
Use floats after edging and grooving to smooth the surface and allow trapped air and water to escape.
Style B floats accept a handle (sold separately). The handle is male on one end and female on the other, so multiple handles can be connected for longer reach.
Concrete Brooms
Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.
Brooms accept a handle (sold separately). The handle is male on one end and female on the other, so multiple handles can be connected for longer reach.
Concrete Edgers
Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.
Handle | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Radius | Material | Lg. | Material | Each | |
| 5 7/8" | 3" | 3/8" | Aluminum | 3 3/4" | Wood | 000000 | 000000 |
Concrete Groovers
Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.
Handle | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Groove Dp. | Material | Lg. | Material | Each | |
| 5 3/4" | 2 1/2" | 1/2" | Aluminum | 3 7/8" | Wood | 000000 | 000000 |
Concrete Rakes
Push and pull freshly poured concrete.
Blade | Handle | Overall | |||||
|---|---|---|---|---|---|---|---|
| Ht. | Material | Lg. | Material | Lg. | Wd. | Each | |
| 4" | Steel | 60" | Wood | 62" | 20" | 0000000 | 000000 |
Concrete Form-Board Stake Pullers
Concrete Form-Board Stakes
Concrete Curing Vibrators
Improve the strength of your concrete mix by eliminating trapped air. This lightweight, portable vibrator consolidates the mix.
Shaft | Head | Motor | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Flexibility | Wd. | Ht. | Power | Current | Voltage | Phase | Material | Vibration Speed, VPM | Specifications Met | Cord Lg. | Plug Type | Each | |
| 7 | Flexible | 1" | 1" | 3 hp | 15A | 115V AC | Single | Plastic | 10,500 | C-UL Listed, UL Listed | 12" | Three Prong | 0000000 | 000000000 |
Concrete Mixing Hoes
Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.
Style A has a short handle for mixing small amounts of concrete and for working in tight places.
Masonry Brushes
Remove hardened flecks of mortar, dirt, and other debris.
Bristle | Handle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Thick. | Type | Stiffness | Color | Lg. | Material | Overall Lg. | Each | |
| 4" | 6 1/2" | 3" | Natural | Semi-Soft | White | 6 3/4" | Wood | 10 3/4" | 0000000 | 000000 |
Brick Jointers
Rub these tools along the mortar between bricks for a uniform, finished appearance.
Handle | ||||||
|---|---|---|---|---|---|---|
| For Joint Size | Lg. | Material | Lg. | Material | Each | |
| 1/2", 5/8" | 10 1/2" | Steel | 2 3/4" | Metal | 0000000 | 00000 |
Mobile Easy-Pour Mixers
Roll this mixer where you need it. For easy dispensing, it has an open-top mixing drum that tilts downward to unload material.
Wheels | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | Cap., gal. | Current, A | Frequency, Hz | Drum Opening Size | No. of | Dia. | Ht. | Wd. | Dp. | Wt., lbs. | Material | Cord Lg., ft. | Includes | Each | |
120V AC Single Phase—Three-Prong Plug | ||||||||||||||||
For Concrete, Feed, and Seed | ||||||||||||||||
| 1/2 | 22-25 | 22 | 9.5 | 60 | 15 1/4" | 2 | 10" | 46" | 39" | 28" | 219 | Steel | 1 | Two Mixing Paddles | 0000000 | 000000000 |
Easy-Pour Mixers with Removable Liner
A removable polyethylene liner with molded-in blades allows for easy cleaning. Stand is stationary. This mixer has an open-top mixing drum that tilts downward to unload material.
Hook and Loop Sanding Sheets for Sanding Strip File Handles
Quickly attach, remove, and reuse these sheets with file handles.
For technical drawings and 3-D models, click on a part number.
1" × 11" | ||||||
|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
For Rough Finish | ||||||
| 60 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
For Smooth Finish | ||||||
| 120 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
| 150 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
For Extra-Smooth Finish | ||||||
| 400 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
For Polished Finish | ||||||
| 800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
| 1800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
Adhesive-Back Sanding Sheets for Masonry, Ceramics,
and Composites—Use with Sanding Strip File Handles
These sheets have a long-lasting diamond abrasive. Peel and stick to your file handle. When it’s time to change the sheet, peel it off.
For technical drawings and 3-D models, click on a part number.
1" × 11" | ||||||
|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
For Rough Finish | ||||||
| 60 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
For Smooth Finish | ||||||
| 120 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
| 150 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
For Extra-Smooth Finish | ||||||
| 400 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
For Polished Finish | ||||||
| 800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
| 1800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 00000 |
Sanding Sheets for Masonry, Ceramics,
and Composites—Use with Sheet Sanders
Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials. They also have a cloth backing that’s flexible and difficult to tear. Cut to convenient sizes and shapes, they fit most sheet sanders.
For technical drawings and 3-D models, click on a part number.
3 3/4" × 9" | 4 1/2" × 5 1/2" | |||||||
|---|---|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | Each | ||
For Rough Finish | ||||||||
| 60 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 00000000 | 0000000 | 00000000 | 000000 |
For Smooth Finish | ||||||||
| 120 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 00000000 | 000000 | 00000000 | 00000 |
| 150 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 00000000 | 000000 | 00000000 | 00000 |
For Extra-Smooth Finish | ||||||||
| 400 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 00000000 | 000000 | 00000000 | 00000 |
For Polished Finish | ||||||||
| 800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 00000000 | 000000 | 00000000 | 00000 |
| 1800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 00000000 | 000000 | 00000000 | 00000 |
Sanding Sheets for Masonry, Ceramics, and Composites
These sheets have a long-lasting diamond abrasive.
For technical drawings and 3-D models, click on a part number.
9" × 11" | ||||||
|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
For Rough Finish | ||||||
| 60 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 0000000 |
For Smooth Finish | ||||||
| 120 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
| 150 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
For Extra-Smooth Finish | ||||||
| 400 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
For Polished Finish | ||||||
| 800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
| 1800 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Cloth | Tear Resistant | 0000000 | 000000 |
Sanding Sponge Assortments for Masonry, Ceramics, and Composites
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
For technical drawings and 3-D models, click on a part number.
| Includes | Wd. | Lg. | Thick. | No. of Pieces | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
| One each 60, 120, 200, 400, 800, 1800-grit Sponges | 2 1/8" | 3 1/2" | 1" | 6 | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 0000000 |
Sanding Sponges for Masonry, Ceramics, and Composites
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
For technical drawings and 3-D models, click on a part number.
| Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
For Rough Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 60 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 000000 |
For Smooth Finish | ||||||||
| 120 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
| 150 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
For Extra-Smooth Finish | ||||||||
| 400 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
For Polished Finish | ||||||||
| 800 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |
| 1800 | 2 1/8" | 3 1/2" | 1" | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Diamond | Foam | 0000000 | 00000 |