Fill cracks up to 10" deep on vertical and overhead surfaces.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Patch concrete floors, stairs, and walls with these compounds.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Make castings and fill voids with these two-part pourable epoxies.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Seal joints and gaps in concrete.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.