We will reply to your message within an hour.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Even when used under water, these adhesives maintain their strength.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Pull off a small piece of putty and stick lightweight objects to a surface.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install building materials such as wood and drywall with these general purpose adhesives.
Install vinyl and rubber treads on stairs with this adhesive.
Bond and repair nosing and stair treads with this thick, two-part epoxy.
Install foam insulation, drywall, and paneling with these adhesives.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Permanently set threaded rods, studs, and rebar in concrete.
These kits include adhesives, applicators, and mixer nozzles.
When concrete is saturated or submerged in water, use these adhesives to form strong bonds.
Bond new concrete to old concrete, or use this adhesive as a primer on concrete surfaces.
These adhesives maintain their strength at temperatures up to 250° F.
The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.
Remaining flexible after curing, these glue sticks accommodate joint movement.
Often used on diesel engines, exhaust systems, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
This tape has a higher density than standard tape for a better seal between threads.
Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
The textured finish matches concrete surfaces.
Seal joints and gaps in concrete.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Make castings and fill voids with these two-part pourable epoxies.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
These patching compounds are the most flexible and watertight we offer.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Fill cracks up to 10" deep on vertical and overhead surfaces.
Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.
Fill cracks in horizontal, vertical, and overhead concrete surfaces.
Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.
Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.
Patch concrete floors, stairs, and walls with these compounds.
Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.
Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.
Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.
These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.
Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.
Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.
For use when thickness will be less than 2", sand mixes consist of cement and sand.
Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.
Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.
These adhesives come in a tube.
Use cartridges with a standard caulk gun for quick and easy dispensing.
These adhesive removers are safe, easy to use, and virtually odorless. They evaporate slowly, allowing them to work for up to 24 hours.
More effective than water-based degreasers, these solvent-based degreasers cut through the toughest grease and oils.