Mix and match components to design an office work area that can be reconfigured as needed. Desks come with removable modesty panels for privacy. Desk height can be adjusted in 1" increments.

Corner desks connect two rectangular desks.

Drawer cabinets mount under the work surface and have a keyed lock.

CPU holders adjust from 5 1/2"-9 1/4" wide and 14 3/4"-20 1/2" high for a secure hold. They mount under the work surface.

The top compartment has a window that shields the monitor while providing a clear view of the screen. Cutouts in the back provide both routing for cords and ventilation to keep equipment cool. For added security, the top compartment and keyboard tray have keyed locks.

Stainless steel workstations are designed to withstand corrosive environments.

Adjust the shelves to accommodate a computer and other electronic equipment.

Style A have a molded panel for cable management.

Style C have a mouse tray that can rotate 360°.

Style D have leveling feet to compensate for uneven floors.

Change any desk or table into a stand-up-height work surface. Raise and lower these workstations with a lever—you don't need to clear the surface to adjust the height. The air cylinder makes adjustments smooth and even. To keep wrists comfortable while working and typing, these workstations have chamfered edges.

For a comfortable computer setup, use workstations with a keyboard tray. The tray has space for a keyboard and mouse, and the monitor platform is wide enough for two standard monitors. Organize your cords using cutouts at the back of the keyboard tray.

Create a customized work area by adding accessories. These workstations are often used for small-parts assembly.

Static-dissipative tops, shelves, and bin-box rails have a surface that dissipates static to protect sensitive electronic equipment from damage.

Monitor holders rotate 360° on a swing arm.

Keyboard holders attach to the bottom of the monitor holder.

CPU holders suspend your CPU on a platform below the workstation to free up space. They slide out for access to the CPU.

Outlet strips have six outlets, a power switch, and a circuit breaker.

Drawers mount under the work surface and have a keyed lock.

Light fixtures adjust in any direction. They use two tubular T8 fluorescent bulbs (not included).

Shelves tilt forward and backward 45°.

Bin box racks contain four 13-in. rails, and can hold up to 12 four-in.-wide × three-in.-tall bin boxes.

Bin-box rails accept hanging bin boxes.

Move tools along the length of workstations with tool trolleys. Trolleys come with one hanger; additional hangers sold separately.

Footrest tubes span the length of workstations for foot support. Use footrest platforms along with footrest tubes for additional support.

The top compartment has a window that shields the monitor while providing a clear view of the screen. Louvered cutouts allow ventilation to keep equipment cool, and all compartments have a keyed lock for added security.

Style A have cutouts for routing cords. A rear door provides access for performing maintenance.

Style B protect a computer from dirt and dust with gasketed construction. A fan/filter assembly keeps air inside clean and circulating, and a rear door provides access for performing maintenance.

Style C are made of stainless steel to withstand corrosive environments. They have cutouts in the back for routing cords.

With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments. They have a surge suppressor outlet strip and a fan/filter assembly that keeps air inside clean and circulating. The top compartment has a latch that can only be opened when the bottom compartment is unlocked. Secure the bottom compartment and keyboard tray with padlocks.

Mobile workstations have a floor lock to keep them in place.

These durable tables won't warp or splinter. Use them as a work surface for machines and equipment. They can be configured at a custom height. Adjust height in 3" increments by removing and repositioning the leg bolts.

Tables that adjust 22"-28" high position work at a comfortable height when seated. Tables that adjust 30"-36" high can be configured for either seated or standing tasks. Tables that adjust 34"-40" high are the same height as most workbenches, making them a comfortable height for most standing tasks.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive. All are standard table height.

Styles A, C, and D have leveling feet to compensate for uneven floors. Style A also have chrome-plated legs.

Adjust these tables from 18" to 24" to customize the height of machinery and equipment. Remove and reposition the leg bolts to adjust height in 3" increments. The durable steel top won’t warp or splinter.