Compact C-Clamps | McMaster-Carr

Filter by

Clamp Type

System of Measurement

Thread Size

Material

Clamping Action

Mount Type

Height

Reach

Inside Width

Body Material

Handle Style

Clamping Surface Type

Body Height

Holding Capacity

Weight Capacity

Finish

Beam Mount Location

Center-to-Center

For Beam Shape

Clamping Surface Texture

Clamping Surface Material

Length

Pipe Size

Forward

How can we improve?

888 Products

C-Clamps

Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

Extra Heavy Duty C-Clamps

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

Heavy Duty C-Clamps

These clamps have twice the capacity of standard C‐clamps.

Nonmarring C-Clamps

Plastic clamping surfaces prevent damage to material.

Corrosion-Resistant C-Clamps

These clamps are made of stainless steel for excellent corrosion resistance.

Lightweight Aluminum C-Clamps

Lighter weight than other metal clamps, these are less likely to bend thin material.

Nonsparking C-Clamps

All components of these clamps are made of aluminum-bronze that is Factory Mutual approved. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

High-Visibility C-Clamps

A bright finish makes these clamps easy to see.

Nonconductive C-Clamps

Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.

Low-Profile C-Clamps

With no handle or protruding screw, these clamps can fit into tight spaces.

Three-Way C-Clamps

Three screws apply pressure to three sides of a workpiece.

Narrow-Body C-Clamps

The clamp body is extra-slim to fit into narrow openings.

Extended-Reach C-Clamps

Clamp farther in from the edge of a workpiece than with other C‐clamps.

No-Twist C-Clamps

The jaws move in unison to apply even pressure and prevent twisting.

Three-Way No-Twist C-Clamps

Apply pressure to the side of a workpiece as well as the top and bottom.

Bench-Mount No-Twist C-Clamps

Hold the workpiece down against a bench or table.

Nonmarring No-Twist C-Clamps

Plastic clamping surfaces prevent damage to material.

C-Style Toggle Clamps

For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handle to secure and release workpieces.

Swiveling Pads for C-Clamps

Replace a fixed clamping surface with a swiveling pad that compensates for uneven workpieces.

Fast-Action C-Clamps

Press the quick‐release button and slide the screw into position to make adjustments in less time.

Locking Plier Clamps

Right-Angle Locking Plier Clamps for Sheets

Angled jaws clamp sheets, bars, and U-channels at 90°.

Locking Plier Clamps for Sheets

Press the lever down to lock these clamps, which fit in tight spaces and hold thin materials.

Bar-Style Locking Plier Clamps

Slide the upper jaw to adjust the opening size. These clamps hold larger workpieces than other locking plier clamps of similar size.

Locking Plier Clamps

Turn the knob to adjust the opening size.

Self-Adjusting Locking Plier Clamps

Squeeze the handles and the jaws will automatically adjust to fit your workpiece.

Locking Plier Spreaders

The jaws on these tools apply outward pressure for use as a spreader.

Bench-Mount Locking Plier Clamps

Mount to the top of your workbench.

Portable Bench-Top Locking Plier Clamps

A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.

Latch-Style Clamps

Heavy Duty Latch-Style Toggle Clamps

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Latch-Style Toggle Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Latch-Style Toggle Clamps

Fit the draw arm over a latch plate and pull the handle to clamp.

Right-Angle Latch-Style Toggle
Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Right-Angle Latch-Style Toggle Clamps

Mount the clamp on a lid and the latch plate on the side of a container.

Adjustable-Angle Handscrew Clamps

Each jaw can be positioned at an angle to hold round, angled, and odd-shaped material.

Beam Clamps

Angle Iron Clamps for Threaded Rod

A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.

Parallel Beam-to-Beam Clamps

Join two beams in a straight line.

Perpendicular Beam-to-Beam Clamps

Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Press-Fit Beam Clamps for Threaded Rod

A toothed clip secures these clamps to the beam—no fasteners required.

Angled Beam Clamps for Threaded Rod

Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.

Sloped Beam Clamps for Threaded Rod

These clamps rotate and pivot to ensure the rod hangs straight, even on sloped beams.

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Beam Clamps with Tie Wire Hanger

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.

Beam Clamps for Hooks and Hangers

Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

U-Bolts

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Railing Clamps

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Lifting and Pulling

Vertical-Lift Plate-Lifting Clamps

Use these clamps to raise a metal plate straight up from its original vertical position.

Nonmarring Vertical-Lift Plate-Lifting Clamps

Pads on these clamps prevent the grip from biting into the load.

Vertical-Lift with 90° Tilt Plate-Lifting Clamps

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° to lift vertically. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Horizontal-Lift Plate-Lifting Clamps

Use in pairs with a two-leg sling to transfer metal plates in a horizontal position. Unlike other plate-lifting clamps, these can pick up multiple plates at the same time.

Nonmarring Vertical-Lift with
180° Flip Plate-Lifting Clamps

Pads on these clamps prevent the grip from biting into the load.

Vertical-Lift with 180° Flip Plate-Lifting Clamps

Beam-Lifting Tongs

These tongs firmly grab flat and tapered beams.

Hand-Held Vertical-Lift Plate-Lifting Clamps

Lift metal plates by hand by gripping the edge.

Square Shaft Collars

Install these two-piece collars square shafts.

Bonding and Grounding

Bonding and Grounding Clamps

Bonding and Grounding Cable

Create a grounding path to prevent static charge buildup.

Bonding and Grounding Clamps with Cable

Create a grounding path to prevent static charge buildup.