Filter by
Material
Diameter
Hardness Rating
Thermal Conductivity @ Temperature
Appearance
Hardness
Tolerance Rating
Fabrication
Melting Point Temperature
Modulus of Elasticity
Surface Resistivity
Heat Treatable
Yield Strength
Export Control Classification Number (ECCN)
Density
REACH
DFARS Specialty Metals
Elongation
About Copper, Brass & Bronze
Compare over 30 copper, brass, and bronze alloys to find the right material for you—all with material certificates for traceability.
Multipurpose 110 Copper Rods and Discs
- Yield Strength:
Inch sizes: Not Rated
Metric sizes: 17,000 psi - Hardness:
Inch sizes: Rockwell F65 (Soft)
Metric sizes: Brinell 35 (Soft) - Temper:
6" dia. rods: M30
All other inch sizes: H04 (Full Hard)
Metric sizes: Not Rated - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B187
Metric sizes: European Standard EN 13601
Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 3/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 1/4" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 5/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 3/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 7/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 1/2" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 9/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 5/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 3/4" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 13/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 7/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 1" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 1 1/8" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 1/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 3/8" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 5/8" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 3/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2 1/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2 3/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 3" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 3 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 5" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 6" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 |
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 1/2" Lg. | 1" Lg. | 2" Lg. | 3" Lg. | 4" Lg. | |
| 1" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 2" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 3" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 4" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 5" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 6" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 |