The buzzer warns workers of hazards even when they’re outside a direct line of sight.

LED bulbs last longer than incandescent bulbs and provide years of maintenance-free operation.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

Volume increases as voltage increases.

The light with a pulse tone alternates on/off to draw greater attention than the light with a continuous tone.

For technical drawings and 3-D models, click on a part number.

Lights combine high-visibility strobes with a buzzer that warns workers of hazards even when they’re outside a direct line of sight.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

For technical drawings and 3-D models, click on a part number.

The revolving motion of the light makes these more visible than flashing lights. The bell alerts workers when they're outside a direct line of sight.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing. The beep or buzzer alerts workers when they're outside a direct line of sight. Lights meet IP65 for protection from washdowns.

Replacement mounting pipes can be cut to length. Use them to lengthen the existing pipe or to replace it entirely.

For technical drawings and 3-D models, click on a part number.

Good for tight spaces where a tower of lights won’t fit, these emit three colors from a single lens. They have an LED bulb for years of maintenance-free operation. The buzzer alerts workers when they're outside a direct line of sight. Rated NEMA 4X for washdown applications.

For technical drawings and 3-D models, click on a part number.

Get notified about equipment issues even when you aren't around your machines. These lights connect to your computer via Ethernet, allowing you to set up email alerts when there is a problem with a machine, server, or conveyor. The buzzer can emit both continuous and pulse tones—pulse tones alternate on/off to draw greater attention than continuous tones. Lights have an LED bulb for years of maintenance-free operation.

Use a computer to program colors, lighting patterns, and sounds to communicate a variety of status conditions, material levels, and cycle times—these stack lights have 21 colors and 11 sounds. Since you set up each signal from your computer, you can update them without changing hardware or wiring. These lights let you remotely monitor equipment because they don't need to be installed near the equipment they're monitoring as long as these lights are on the same Ethernet network as the equipment. For widespread communication across your facility, set as many as eight of these lights to mirror the signals of one main light.

Connect these stack lights to your computer with an Ethernet or USB cord. They can either connect to power from their terminal block or, for a simpler setup, use Power over Ethernet (PoE). They have digital inputs, so they can also receive electric signals from your programmable logic controller (PLC) or microcontroller.

Mount them to a flat surface using the included fasteners. Add a base for additional mounting options.

Wall-mount bases attach lights to vertical surfaces, such as the side of a machine.

Pole-mount bases have a hole, so you can run the light’s cords and wiring through the pole.

Freestanding bases make these lights portable by keeping them upright and stable on any flat surface.

For technical drawings and 3-D models, click on a part number.

Attract more attention with a strobe light as well as an audible alarm. Arm and disarm these alarms with a key. They sound an alarm and emit short, intense bursts of light when a door is opened without authorization and the alarm and magnetic contact are separated. All require a mortise lock cylinder (sold separately) for operation.

Mount an optional rim lock cylinder (not included) on the opposite side of the door to arm and disarm these alarms from the outside.