About Turnbuckles and End Fittings
More
Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have excellent corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size  | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
| 400 | 5 7/8" | 2 3/8" | 8 1/4" | 3/16" | Cotter Ring | 3/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
| 1,000 | 5 7/8" | 1 7/8" | 7 3/4" | 1/4" | Cotter Ring | 1/4" | 1/4"-28 | Jam Nuts | 00000000 | 00000 |
| 1,000 | 7 1/2" | 3 1/2" | 11" | 1/4" | Cotter Ring | 1/4" | 1/4"-28 | Jam Nuts | 0000000 | 00000 |
| 1,600 | 8 5/8" | 3 3/4" | 12 3/8" | 5/16" | Cotter Ring | 5/16" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 2,800 | 9 7/8" | 4 1/8" | 14" | 3/8" | Cotter Ring | 3/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 4,200 | 12" | 4 1/2" | 16 1/2" | 1/2" | Cotter Ring | 1/2" | 1/2"-20 | Jam Nuts, Bronze Pivot Insert | 0000000 | 000000 |
| 5,900 | 15 1/4" | 5 1/4" | 20 1/2" | 5/8" | Cotter Ring | 5/8" | 5/8"-18 | Jam Nuts, Bronze Pivot Insert | 0000000 | 000000 |
Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Galvanized steel and zinc-plated steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
316 stainless steel has good corrosion resistance.
Forged bodies and components are stronger than cast and wire drawn bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Features | Each | |
Forged Steel Body with Galvanized Steel Fittings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1,000 | 8" | 3" | 11" | Round | 3/8" | 1/4"-28 | Jam Nuts | 0000000 | 000000 |
| 1,600 | 9" | 3 3/4" | 13 3/4" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 2,800 | 10" | 4 1/4" | 14 1/4" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 4,200 | 12" | 4 3/4" | 16 3/4" | Round | 3/4" | 1/2"-20 | Jam Nuts | 0000000 | 00000 |
| 5,900 | 14" | 5" | 19" | Round | 7/8" | 5/8"-18 | Jam Nuts | 0000000 | 00000 |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | |||||||||
| 30 | 3 1/2" | 1 1/4" | 4 3/4" | Round | 1/4" | 8-32 | __ | 000000000 | 0000 |
| 40 | 4 1/4" | 1 11/16" | 5 15/16" | Round | 1/4" | 10-24 | __ | 000000000 | 0000 |
| 50 | 4 3/4" | 1 15/16" | 6 11/16" | Round | 5/16" | 12-24 | __ | 000000000 | 0000 |
| 90 | 5 1/2" | 2 1/8" | 7 5/8" | Round | 3/8" | 1/4"-20 | __ | 000000000 | 0000 |
| 100 | 6 1/2" | 2 9/16" | 9 1/16" | Round | 1/2" | 5/16"-18 | __ | 000000000 | 0000 |
| 200 | 7 1/2" | 3 1/8" | 10 5/8" | Round | 5/8" | 3/8"-16 | __ | 000000000 | 0000 |
Cast 316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||
| 300 | 5 1/2" | 2 1/4" | 7 3/4" | Round | 1/4" | 8-32 | Jam Nuts | 0000000 | 00000 |
| 800 | 8 1/4" | 4 1/2" | 12 3/4" | Round | 1/4" | 12-24 | Jam Nuts | 0000000 | 00000 |
| 1,200 | 11 1/2" | 6 1/4" | 17 3/4" | Round | 1/2" | 5/16"-18 | Jam Nuts | 0000000 | 00000 |
| 2,200 | 12" | 6 1/4" | 18 1/4" | Round | 5/8" | 3/8"-16 | Jam Nuts | 0000000 | 00000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||
| 400 | 6" | 2 1/4" | 8 1/4" | Round | 5/16" | 10-32 | Jam Nuts | 0000000 | 00000 |
| 1,000 | 7 1/2" | 3 1/4" | 10 3/4" | Round | 3/8" | 1/4"-28 | Jam Nuts | 0000000 | 00000 |
| 1,600 | 8 1/2" | 4 1/8" | 12 5/8" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 2,800 | 9 5/8" | 4 3/8" | 14" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 4,200 | 12 1/2" | 3" | 15 1/2" | Round | 3/4" | 1/2"-20 | Jam Nuts | 0000000 | 000000 |
| 5,900 | 15" | 5 3/4" | 20 3/4" | Round | 7/8" | 5/8"-18 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
| 400 | 5 7/8" | 2 3/8" | 8 1/4" | 3/16" | Cotter Ring | 3/16" | Round | 5/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
| 1,000 | 7 1/2" | 3 3/8" | 10 7/8" | 1/4" | Cotter Ring | 1/4" | Round | 3/8" | 1/4"-28 | Jam Nuts | 0000000 | 00000 |
| 1,600 | 8 1/2" | 4" | 12 1/2" | 5/16" | Cotter Ring | 5/16" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 2,800 | 9 3/4" | 4 1/4" | 14" | 3/8" | Cotter Ring | 3/8" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 4,200 | 12" | 3 3/4" | 15 3/4" | 1/2" | Cotter Ring | 1/2" | Round | 3/4" | 1/2"-20 | Jam Nuts, Bronze Pivot Insert | 0000000 | 000000 |
| 5,900 | 15" | 5" | 20" | 5/8" | Cotter Ring | 5/8" | Round | 7/8" | 5/8"-18 | Jam Nuts, Bronze Pivot Insert | 0000000 | 000000 |
Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Zinc-plated steel is mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 40 | 4 1/8" | 1 11/16" | 5 13/16" | 1/4" | Round | 1/4" | 10-24 | __ | 000000000 | 00000 |
| 50 | 4 5/8" | 1 15/16" | 6 9/16" | 5/16" | Round | 5/16" | 12-24 | __ | 000000000 | 0000 |
| 90 | 5 3/8" | 2 1/8" | 7 1/2" | 3/8" | Round | 3/8" | 1/4"-20 | __ | 000000000 | 0000 |
| 100 | 6 3/8" | 2 9/16" | 8 15/16" | 1/2" | Round | 1/2" | 5/16"-18 | __ | 000000000 | 0000 |
| 200 | 7 5/8" | 3 1/8" | 10 3/4" | 5/8" | Round | 5/8" | 3/8"-16 | __ | 000000000 | 0000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
| 80 | 5 5/8" | 2 1/2" | 8 1/8" | 1/4" | Round | 5/16" | 10-32 | Jam Nuts | 0000000 | 00000 |
| 100 | 7 1/2" | 3 3/8" | 10 7/8" | 3/8" | Round | 3/8" | 1/4"-28 | Jam Nuts | 0000000 | 00000 |
| 200 | 8 1/2" | 4 1/8" | 12 5/8" | 1/2" | Round | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 400 | 9 5/8" | 4 3/8" | 14" | 5/8" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 700 | 12" | 3 1/2" | 16" | 3/4" | Round | 3/4" | 1/2"-20 | Jam Nuts | 0000000 | 000000 |
| 1,200 | 15" | 6" | 21" | 7/8" | Round | 7/8" | 5/8"-18 | Jam Nuts | 0000000 | 000000 |
Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Zinc-plated steel is mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Features | Each | |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | ||||||||
|---|---|---|---|---|---|---|---|---|
| 40 | 4 1/4" | 1 11/16" | 5 15/16" | 1/4" | 10-24 | __ | 000000000 | 00000 |
| 50 | 4 3/4" | 1 15/16" | 6 11/16" | 5/16" | 12-24 | __ | 000000000 | 0000 |
| 90 | 5 1/2" | 2 1/8" | 7 5/8" | 3/8" | 1/4"-20 | __ | 000000000 | 0000 |
| 100 | 6 1/2" | 2 9/16" | 9 1/16" | 1/2" | 5/16"-18 | __ | 000000000 | 0000 |
| 200 | 7 1/2" | 3 1/8" | 10 5/8" | 5/8" | 3/8"-16 | __ | 000000000 | 0000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||
| 80 | 5 1/2" | 2 1/2" | 8" | 1/4" | 10-32 | Jam Nuts | 0000000 | 00000 |
| 100 | 7 1/2" | 3 1/2" | 11" | 3/8" | 1/4"-28 | Jam Nuts | 0000000 | 00000 |
| 200 | 8 1/2" | 4 1/8" | 12 5/8" | 1/2" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 400 | 9 5/8" | 4 3/8" | 14" | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 700 | 12" | 4" | 16" | 3/4" | 1/2"-20 | Jam Nuts | 0000000 | 000000 |
| 1,200 | 14 5/8" | 6 1/4" | 20 7/8" | 7/8" | 5/8"-18 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting
Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
To install, fray the end of the wire rope with a marlin spike and screw the socket over the plug. You'll know the wire rope is secure if you see wire strands through the inspection hole on the turnbuckle body. Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel is mildly corrosion resistant.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for vertical lifting only.
Clevis Pin | For Wire Rope | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Dia. | Construction | Wire Rope Fitting Type | Specifications Met | Each | |
Steel Body with Steel Fittings | |||||||||||||
| 90 | 6 5/16" | 2 1/2" | 8 13/16" | 3/16" | Cotter Pin | 3/16" | 10-32 | 1/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
| 340 | 7 11/16" | 2 7/8" | 10 9/16" | 1/4" | Cotter Pin | 1/4" | 1/4"-28 | 1/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 00000 |
| 740 | 9 1/2" | 3 1/8" | 12 5/8" | 5/16" | Cotter Pin | 5/16" | 3/8"-24 | 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
| 1,360 | 10 15/16" | 4 13/16" | 15 3/4" | 3/8" | Cotter Pin | 3/8" | 1/2"-20 | 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
Zinc-Plated Steel Body with Steel Fittings | |||||||||||||
| 740 | 9 1/2" | 3 1/8" | 12 5/8" | 5/16" | Cotter Pin | 5/16" | 3/8"-24 | 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
| 3,020 | 13 1/4" | 5 5/16" | 18 9/16" | 1/2" | Cotter Pin | 7/16" | 3/4"-16 | 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
316 Stainless Steel Body with Steel Fittings | |||||||||||||
| 740 | 9 1/2" | 3 1/8" | 12 5/8" | 5/16" | Cotter Pin | 5/16" | 3/8"-24 | 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
| 1,360 | 10 15/16" | 4 13/16" | 15 3/4" | 3/8" | Cotter Pin | 3/8" | 1/2"-20 | 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
Closed-Body Mounting-Plate-to-Wire Rope Turnbuckles—Not for Lifting
Create a wire rope railing, perimeter, or barrier. These turnbuckles have a closed body that protects them from damage and debris and keeps them slim enough to fit in tight spaces. All are 316 stainless steel, so they have excellent resistance to chemicals and salt water.
Turnbuckles with a sleeve grip fitting have a mounting plate with swivel ends. To install, mount the turnbuckle to a wall or post. Then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench.
Turnbuckles with a compression grip fitting have a mounting plate with pivot ends. Compress the thin shank wall with a hand tool (sold separately) to install. The compression grip fitting is also known as a hand swage fitting.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for in-line pulling only.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | For Wire Rope | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Lg. | Wd. | Movement | Dia. | Construction | Wire Rope Fitting Type | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Thread Size | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||||||
| 70% of the Rope's Capacity | 4 1/16" | 1 3/8" | 5 7/16" | 1 1/2" | 1 1/2" | 360° Swivel | 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 3 | 0.164" | Yes | 1/4"-28 | 000000 | 000000 |
| 70% of the Rope's Capacity | 6 7/8" | 2 1/2" | 9 3/8" | 2 1/8" | 5/8" | 360° Swivel | 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.244" | Yes | 1/4"-28 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 7 7/16" | 4" | 11 7/16" | 2 1/16" | 9/16" | 180° Pivot | 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Compression Grip | 2 | 0.243" | No | 1/4"-28 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 7 3/4" | 3" | 10 3/4" | 2 13/16" | 13/16" | 360° Swivel | 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.318" | Yes | 5/16"-24 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 8 1/4" | 4" | 12 1/4" | 2 3/16" | 9/16" | 180° Pivot | 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Compression Grip | 2 | 0.243" | No | 1/4"-28 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 9" | 3 7/16" | 12 7/16" | 3 1/16" | 7/8" | 360° Swivel | 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.394" | Yes | 3/8"-24 | 0000000 | 00000 |
| Hand Tool for Compression-Grip Wire Rope End Fittings | 0000000 | Each | 0000000 |
Hook-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||
| 80 | 5 3/4" | 2 1/4" | 8" | 1/4" | 3/16" | Cotter Ring | 3/16" | 10-32 | Jam Nuts | 0000000 | 000000 |
| 100 | 7 1/2" | 3 1/2" | 11" | 3/8" | 1/4" | Cotter Ring | 1/4" | 1/4"-28 | Jam Nuts | 0000000 | 00000 |
| 200 | 8 3/8" | 4 1/4" | 12 5/8" | 1/2" | 5/16" | Cotter Ring | 5/16" | 5/16"-24 | Jam Nuts | 0000000 | 00000 |
| 400 | 9 9/16" | 4 7/16" | 14" | 5/8" | 3/8" | Cotter Ring | 3/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
| 700 | 12" | 4 3/4" | 16 3/4" | 3/4" | 1/2" | Cotter Ring | 1/2" | 1/2"-20 | Jam Nuts, Bronze Pivot Insert | 0000000 | 000000 |
| 1,200 | 15" | 5 3/4" | 20 3/4" | 7/8" | 5/8" | Cotter Ring | 5/8" | 5/8"-18 | Jam Nuts, Bronze Pivot Insert | 0000000 | 000000 |
Closed Turnbuckle Bodies—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, they have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.