Hook-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Hook | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Material | Capacity, lbs. | Each | |
Nickel-Plated Brass | |||||||||
| 3/64"-1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 11/32" | 2 31/32" | 17/32" | 1/4" | Steel | 25 | 0000000 | 00000 |
| 5/64"-3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 15/32" | 3 9/16" | 17/32" | 1/4" | Steel | 50 | 0000000 | 00000 |
| 3/32"-1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 19/32" | 4 7/32" | 17/32" | 1/4" | Steel | 110 | 0000000 | 00000 |
Clevis-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Capacity, lbs. | Each | |
Nickel-Plated Brass | ||||||||
| 3/64"-1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 1 23/32" | 5/16" | 9/16" | 5/16" | 25 | 0000000 | 000000 |
| 1/16"-3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 2 7/32" | 1/4" | 15/32" | 1/4" | 50 | 0000000 | 00000 |
| 3/32"-1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 3 17/32" | 3/8" | 19/32" | 3/8" | 110 | 0000000 | 00000 |
Clevis-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
To install, unscrew the fitting, slide over the wire rope, then tighten the pieces together with a wrench. Use for light-duty securing, tethering, and suspending. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | End-to-End Lg. | Clevis Inside Wd. | Pin Dia. | Each | |
316 Stainless Steel  | |||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7/16" | 2 1/2" | 1/4" | 1/4" | 00000000 | 000000 |
| 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1/2" | 2 7/8" | 5/16" | 5/16" | 00000000 | 00000 |
| 3/16" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 1/4" | 7/16" | 7/16" | 00000000 | 00000 |
| 1/4" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 3/4" | 1/2" | 1/2" | 00000000 | 00000 |
| 5/16" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 4 11/16" | 9/16" | 9/16" | 00000000 | 000000 |
| 3/8" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1" | 5 1/4" | 11/16" | 11/16" | 00000000 | 000000 |
Wedge-Lock Wire Rope End Fittings—For Lifting
Also known as open wedge sockets, these end fittings require only a torque wrench to install. To install, wrap the wire rope around the removable wedge before securing it inside the body. A wire rope clamp attached through the top hole in the wedge secures the short (dead) end.
Two additional holes at the bottom of the wedge can be used as a "go/no go" gauge to determine the proper rope size. The wire rope should pass through the "go" hole and not through the "no go" hole.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Fittings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Replacement Wedges | Replacement Pins | ||||||||||
| Dia. | Construction | Clevis Inside Wd. | For Pin Dia. | Required Torque, ft.-lbs. | Capacity | Specifications Met | Each | Each | Each | |||
Red-Painted Steel | ||||||||||||
| 3/8" | 18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core | 13/16" | 13/16" | 45 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. RR-S-550E | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 |
| 1/2" | 18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core | 1" | 1" | 65 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. RR-S-550E | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 5/8" | 18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core | 1 1/4" | 1 7/32" | 95 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. RR-S-550E | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | 18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core | 1 1/2" | 1 13/32" | 130 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. RR-S-550E | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
Swivel-Hook-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while driving the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Hook | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Fabrication | Material | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||||
| 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 6 19/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 0000000 | 0000000 |
| 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 7/16" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 0000000 | 000000 |
| 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 9 5/16" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 0000000 | 000000 |
Zinc-Plated Steel | |||||||||||
| 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 6 19/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 0000000 | 000000 |
| 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 7/16" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 0000000 | 000000 |
| 5/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 8 1/4" | 1 1/8" | 3/4" | Forged | Steel | 1,830 | ASME B30.26 | 0000000 | 000000 |
| 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 9 5/16" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 0000000 | 000000 |
Clevis-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 000000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Clevis-End Roller Swage Wire Rope End Fittings—Not for Lifting
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Fittings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Dies | |||||||||||
| Dia. | Construction | End-to-Eye Lg. | Shank Dia. | Clevis Inside Wd. | For Pin Dia. | Capacity, lbs. | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
18-8 Stainless Steel | ||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 5/8" | 3/16" | 1/8" | 3/16" | 90 | MS20667 | 0000000 | 000000 | 2 | 0000000 | 000000000 |
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2" | 1/4" | 1/8" | 3/16" | 100 | MS20667 | 0000000 | 00000 | 2 | 0000000 | 00000000 |
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 3/8" | 1/4" | 1/4" | 3/16" | 400 | MS20667 | 0000000 | 00000 | 2 | 0000000 | 00000000 |
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 11/16" | 5/16" | 1/4" | 1/4" | 500 | MS20667 | 0000000 | 00000 | 2 | 0000000 | 00000000 |
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 3 1/8" | 3/8" | 5/16" | 5/16" | 800 | MS20667 | 0000000 | 00000 | 2 | 0000000 | 00000000 |
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 3 13/16" | 1/2" | 3/8" | 3/8" | 1,400 | MS20667 | 0000000 | 00000 | 2 | 0000000 | 00000000 |