Filter by
Material
Tube Material
Bolt Material
Environment
DFARS Specialty Metals
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Clamps for High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets or O-Rings
- Tubing:
Inch 304 Stainless Steel and Nylon Plastic: Use with welded 304/304L and 316/316L stainless steel that meets ASTM A269 or ASTM A270, except ASME BPE: Use with welded or seamless 304/304L stainless steel that meets ASTM A269 or ASTM A270
Metric 304 Stainless Steel: Use with welded 304/304L and 316/316L stainless steel
Inch 316 Stainless Steel: Use with welded 304/304L and 316/316L stainless steel
Metric 316 Stainless Steel: Use with welded 316/316L stainless steel
Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line.
Wing nut—These clamps tighten by hand, no tools required. Clamps with a spring closure can be installed with one hand, as the spring holds the clamp in place. Clamps with a safety wing nut have a wider wing nut base and a narrower clamp gate than our other wing nut clamps, so they stay latched even when bumped and knocked. This is useful in steam lines where accidentally releasing the clamp could cause injuries. They also have a leak-before-burst design, so rather than bursting dangerously if the seal fails, they’ll safely relieve pressure by dripping instead.
Clamps with a two-pin hinge require less clearance to open than other clamps. Use these for installation in tight spaces.
304 stainless steel clamps have very good corrosion resistance. 316 stainless steel clamps are more corrosion resistant than 304 stainless steel clamps. Nylon clamps are lightweight compared to stainless steel clamps.
Clamps that meet DIN 11864 or DIN 32676 adhere to international standards for sanitary quick-clamp fittings.
For technical drawings and 3-D models, click on a part number.
304 Stainless Steel with Wing Nut
| For Tube OD | For Flange OD | Max. Pressure | Specifications Met | Each | |
| 1/4", 3/8", 1/2", 5/8", 3/4" | 0.984" | 1,200 psi @ 72° F | __ | 00000000 | 000000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 00000000 | 00000 |
| 2" | 2.516" | 450 psi @ 72° F | __ | 00000000 | 00000 |
| 2 1/2" | 3.047" | 400 psi @ 72° F | __ | 00000000 | 00000 |
| 3" | 3.579" | 350 psi @ 72° F | __ | 00000000 | 00000 |
| 4" | 4.682" | 200 psi @ 72° F | __ | 00000000 | 00000 |
| 6" | 6.57" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 8" | 8.57" | 100 psi @ 72° F | __ | 00000000 | 00000 |
| 10" | 10.57" | 40 psi @ 72° F | __ | 00000000 | 000000 |
| 12" | 12.695" | 30 psi @ 72° F | __ | 00000000 | 000000 |
| 10mm, 16mm, 20mm | 34mm | 90 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 26mm, 32mm, 38mm | 51mm | 90 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 50mm | 64mm | 50 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 66mm | 91mm | 50 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 81mm | 106mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 100mm | 119mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 125mm | 155mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 000000 |
| 150mm | 183mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Closure
316 Stainless Steel with Wing Nut
| For Tube OD | For Flange OD | Max. Pressure | Specifications Met | Each | |
| 10mm, 15mm | 34mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 000000 |
| 20mm, 25mm | 50.5mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 32mm, 40mm | 64mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 50mm | 91mm | 580 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 65mm | 106mm | 580 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 80mm | 119mm | 500 psi @ 300° F | DIN 11864 | 0000000 | 000000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge
| For Tube OD | For Flange OD | Max. Pressure | Each | |
| 1/2", 3/4" | 0.984" | 700 psi @ 72° F | 0000000 | 000000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 700 psi @ 72° F | 0000000 | 00000 |
| 2" | 2.516" | 700 psi @ 72° F | 0000000 | 00000 |
| 2 1/2" | 3.047" | 700 psi @ 72° F | 0000000 | 00000 |
| 3" | 3.579" | 580 psi @ 72° F | 0000000 | 00000 |
| 4" | 4.682" | 500 psi @ 72° F | 0000000 | 00000 |
| 6" | 6.57" | 430 psi @ 72° F | 0000000 | 00000 |
| 8" | 8.57" | 290 psi @ 72° F | 0000000 | 000000 |
| 10" | 10.57" | 230 psi @ 72° F | 0000000 | 000000 |
| 12" | 12.695" | 140 psi @ 72° F | 0000000 | 000000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge
White Nylon Plastic with Wing Nut
| For Tube OD | For Flange OD | Max. Pressure | Each | |
| 1/2", 3/4" | 0.984" | 150 psi @ 72° F | 00000000 | 000000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 150 psi @ 72° F | 00000000 | 00000 |
| 2" | 2.516" | 150 psi @ 72° F | 00000000 | 00000 |
| 2 1/2" | 3.047" | 150 psi @ 72° F | 00000000 | 00000 |
| 3" | 3.579" | 150 psi @ 72° F | 00000000 | 00000 |
| 4" | 4.682" | 150 psi @ 72° F | 00000000 | 00000 |
| 6" | 6.57" | 150 psi @ 72° F | 00000000 | 000000 |
| 8" | 8.57" | 150 psi @ 72° F | 00000000 | 000000 |
Gaskets and O-Rings
The temperature rating of the fitting will vary depending on the gasket or O-ring material you choose. Buna-N is oil resistant. EPDM resists water and steam and works well in humid environments. Silicone withstands high temperatures. Fluoroelastomer stands up to fuel, oil, and acid condensates. PTFE withstands harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
| For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|
Buna-N Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 2" | 1.900" | 2.520" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
EPDM Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.670" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10mm | 10.200mm | 34.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 16mm | 16.200mm | 34.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 20mm | 20.200mm | 34.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 26mm | 26.200mm | 50.500mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 32mm | 32.200mm | 50.500mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 38mm | 38.200mm | 50.500mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 50mm | 50.200mm | 64.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 66mm | 66.200mm | 91.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 000000 | 00000 |
| 81mm | 81.200mm | 106.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 100mm | 100.200mm | 119.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 125mm | 125.200mm | 155.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 150mm | 150.200mm | 183.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
Silicone Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10mm | 10.200mm | 36.170mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 16mm | 16.200mm | 36.170mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 20mm | 20.200mm | 36.170mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 26mm | 26.200mm | 52.580mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 32mm | 32.500mm | 52.580mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 38mm | 38.200mm | 52.580mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 50mm | 50.200mm | 66.040mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 66mm | 66.200mm | 93.090mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 81mm | 81.200mm | 108.180mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 100mm | 100.200mm | 121.110mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 125mm | 125.200mm | 157.180mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 150mm | 150.200mm | 185.190mm | 5.2mm | -40° to 450° | Clear | DIN 32676, FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
Fluoroelastomer Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
PTFE Plastic  | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 000000 |
| 12" | 11.730" | 12.660" | 0.205" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 000000 |
| 10mm | 10.200mm | 34.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 16mm | 16.200mm | 34.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 20mm | 20.200mm | 34.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 26mm | 26.200mm | 50.500mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 32mm | 32.200mm | 50.500mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 38mm | 38.200mm | 50.500mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 50mm | 50.200mm | 64.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 66mm | 66.200mm | 91.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 81mm | 81.200mm | 106.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 100mm | 100.200mm | 119.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 00000 |
| 125mm | 125.200mm | 155.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 000000 |
| 150mm | 150.200mm | 183.000mm | 5.2mm | -100° to 500° | White | DIN 32676, FDA Compliant 21 CFR 177.1550 | 000000000 | 000000 |
O-Rings | ||||||||
EPDM Rubber | ||||||||
| 10mm | 12.000mm | 19.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 20mm | 22.000mm | 29.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 32mm | 34.000mm | 44.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 40mm | 40.000mm | 50.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 65mm | 68.000mm | 78.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 80mm | 83.000mm | 93.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
Viton® Fluoroelastomer Rubber | ||||||||
| 10mm | 12.000mm | 19.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 20mm | 22.000mm | 29.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 32mm | 34.000mm | 44.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 40mm | 40.000mm | 50.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 65mm | 68.000mm | 78.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 80mm | 83.000mm | 93.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
PTFE Plastic | ||||||||
| 10mm | 12.000mm | 19.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 20mm | 22.000mm | 29.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 32mm | 34.000mm | 44.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 40mm | 40.000mm | 50.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 65mm | 68.000mm | 78.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
Clamps for Extra-Support High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: -30° to 200° F
- Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM A270
Connect extra-support quick-clamp fittings for a fast and easy way to access your line. Clamps have a wing nut that tightens by hand. They are 304 stainless steel for very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps for Quick-Clamp High-Vacuum Fittings
- For Use With: Air
- Temperature Range: 0° to 300° F
- Tubing: Use with 304/304L stainless steel, 316/316L stainless steel, or aluminum
- Specifications Met: ISO 2861
Connect quick-clamp fittings in high-vacuum applications. Clamps tighten by hand. They are aluminum, which is lightweight with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps
Wing Nut
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | Material | Max. Vacuum | Each | |
Wing Nut | |||||||
|---|---|---|---|---|---|---|---|
| 1/2", 3/4" | 1.18" | 10, 16 | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 1" | 1.57" | 25 | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 1 1/2" | 2.16" | 40 | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 2" | 2.95" | 50 | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
Rings
Ring
Ring with Aluminum Outer Ring
Ring with Stainless Steel Screen
Use these rings with quick-clamp high-vacuum fittings. They consist of a stainless steel inner ring covered by a rubber O-ring.
Rings with a screen filter out large particles.
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | Inner Ring Material | Max. Vacuum | Each | |
Fluoroelastomer Rubber O-Ring | |||||||
|---|---|---|---|---|---|---|---|
Rings | |||||||
| 1/2" | 1.18" | 10 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 3/4" | 1.18" | 16 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 0000 |
| 1" | 1.57" | 25 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 1 1/2" | 2.16" | 40 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 2" | 2.95" | 50 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
Rings with Aluminum Outer Ring | |||||||
| 3/4" | 1.18" | 16 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 1" | 1.57" | 25 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 1 1/2" | 2.16" | 40 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 2" | 2.95" | 50 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
Rings with Stainless Steel Screen | |||||||
| 3/4" | 1.18" | 16 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 1" | 1.57" | 25 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 1 1/2" | 2.16" | 40 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 2" | 2.95" | 50 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
Silicone Rubber O-Ring | |||||||
Rings | |||||||
| 1/2" | 1.18" | 10 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 3/4" | 1.18" | 16 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 1" | 1.57" | 25 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 1 1/2" | 2.16" | 40 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 2" | 2.95" | 50 | ISO-KF | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |